Inhaltszusammenfassung zur Seite Nr. 1
Contents
Safety precautions 2
COLOUR TELEVISION
Preparation 2
......
1 Confirm which remote control you have 3
INSTRUCTIONS ...................................
2 Inserting the batteries 3
3 Connecting the aerial and external devices ...4
Thank you for buying this JVC
........................
4 Connecting the power cord 5
colour television.
..............................................
5 SETUP TOUR 6
To make sure you understand how to
Basic operation 7
use your new TV, please read this
Remote co
Inhaltszusammenfassung zur Seite Nr. 2
Safety precautions WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV. •Operate only from the power source specified on the TV. •Avoid damaging the power cord and main plug. When you unplug the TV, pull it out by the main plug. Do not pull on the power cord. •Never block or cover the cabinet opening for ventilation. Never install the TV where 15 cm good ventilation
Inhaltszusammenfassung zur Seite Nr. 3
Preparation 1 Confirm which remote control you have Your TV comes with one of the two remote controls shown below. Functions you can operate differ depending on the type of remote control. RM-C375GY RM-C367GY For TV model: For TV model: AV-21Y211 AV-16N211 PICTURE ECO PICTURE POWER POWER BOOSTER SENSOR BOOSTER SYSTEM PICTURE SYSTEM PICTURE COLOUR SOUND COLOUR SOUND MODE MODE 12 3 TV/VIDEO 12 3 TV/VIDEO 45 6 45 6 OFF OFF 78 9 TIMER 78 9 TIMER CHANNEL CHANNEL RETURN+ RETURN+ - -- 0 -/-- SCAN 0 / S
Inhaltszusammenfassung zur Seite Nr. 4
Preparation 3 Connecting the aerial and external devices •For further details, refer to the manuals provided with the devices you are connecting. • Connecting cables are not supplied. • The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either jack is output through both. You cannot provide input to both the front and rear jacks at the same time. Disconnect one input, or use one of the jacks as an output jack only (for monitoring or recording). ■ Connecting the ae
Inhaltszusammenfassung zur Seite Nr. 5
Preparation ■ Connecting other external devices To audio To video output output VIDEO AUDIO VCR (for playing) IN OUT VCR (for recording) To audio To video input input • Illustration of AV-21Y211 To video Camcorder output or TV game To audio output MENU VIDEO AUDIO IN Headphones • Illustration of AV-21Y211 • Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off. • Because the front AUDIO jacks are monaural, even
Inhaltszusammenfassung zur Seite Nr. 6
Preparation 5 SETUP TOUR When the TV is first turned on, it enters the SETUP TOUR mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR. •In case of resetting that the reason for such as removal, you can set the AUTO CH PRESET function on the “MENU 3” menu. For details, see page 14. 1 Press the Main power button on the TV. The POWER lamp lights. After the ON TIMER POWER JVC logo has been displayed, the TV automatically switches to the lan
Inhaltszusammenfassung zur Seite Nr. 7
Basic operation The illustration below is for the remote 1 Press the POWER button to turn control RM-C367GY. Your remote control your TV on. may not look exactly like the illustration. • If your TV does not turn on, press the Main power button on the TV then press the POWER button again. •You can also turn on your TV by pressing any of the following buttons; PICTURE ECO POWER SENSOR BOOSTER - the CHANNEL m button SYSTEM PICTURE - the Number buttons COLOUR SOUND MODE - the TV/VIDEO button 12
Inhaltszusammenfassung zur Seite Nr. 8
Remote control buttons and functions ECO SENSOR button COLOUR SYSTEM button If the picture is not clear or no colour appears, change the current colour system You can adjust this TV so that the screen to another colour system. automatically adjusts to the optimum contrast according to the brightness of Press this button to select the colour your room. This function reduces eye system. strain and the power consumption of this TV. AUTO PAL SECAM NTSC4.43 NTSC3.58 Press this butto
Inhaltszusammenfassung zur Seite Nr. 9
Remote control buttons and functions DISPLAY button PICTURE BOOSTER button You can continuously display the current When the picture is unclear because the channel number or VIDEO mode on the reception level of the TV signal is low, screen. activating the Picture Booster improves the picture clarity in some situations. Press this button. Repeatedly press the PICTURE BOOSTER To turn the display off, press this button button to select the desired mode. again. HIGH: • When selecting a VIDEO mode wi
Inhaltszusammenfassung zur Seite Nr. 10
Remote control buttons and functions RETURN + button CHANNEL SCAN button You can set a channel you frequently view You can quickly view all TV channels to the Return Channel and you can view programmes that you can view on your that channel at any time with one-touch. TV, and search for the programme you want to view. To set the channel to the Return Channel: 1 Press this button to start scanning TV channels. 1 Select the channel you want to set The TV channel programmes are each to the Return C
Inhaltszusammenfassung zur Seite Nr. 11
Using the TV’s menus This TV has a number of functions you can operate using the menus. To use all your TV’s functions fully, you need to understand how to use the menus. 3 Repeatedly press the MENU T buttons to select CHANNEL RETURN+ - -- SCAN 0 / a desired function. DISPLAY MUTING DISPLAY 4 Press the MENU M buttons to button MENU / MENU change function settings. MENU –/+ buttons buttons Example: CHANNEL VOLUME Changes the AUTO SHUTOFF setting. MENU 2 MENU
Inhaltszusammenfassung zur Seite Nr. 12
Using the TV’s menus 4 Press DISPLAY to turn the display INPUT off. You can view images from VCRs or other • If you turn off the TV’s main power by devices connected to your TV. pressing the Main power button, the ON TIMER function is canceled. 1 Press MENU T to display the • If you do not turn off the TV after starting “MENU 1” menu, then select the ON TIMER function, the channel will “INPUT”. automatically switch to the channel set for MENU 1 the ON TIMER function. INPUT
Inhaltszusammenfassung zur Seite Nr. 13
Using the TV’s menus AUTO SHUTOFF BLUE BACK You can set your TV to turn off if no If no signal is being received or the signal signals are received for about 15 minutes is very weak, a blue screen automatically or longer after the end of a broadcast. becomes the picture background. If you wish to continue viewing the poor 1 Press MENU T to display the picture, you must set the BLUE BACK “MENU 2” menu, then select function to “OFF”. “AUTO SHUTOFF”. MENU 2 1 Press MENU T to displa
Inhaltszusammenfassung zur Seite Nr. 14
Using the TV’s menus AI ECO DISPLAY AUTO CH PRESET You can automatically preset all TV channels that can be received by your TV You can display on the screen the effect of to channels. the AI ECO SENSOR function. 1 Press MENU T to display the 1 Press MENU T to display the “MENU 3” menu, then select “MENU 2” menu, then select “AUTO CH PRESET”. “AI ECO DISPLAY”. MENU 3 MENU 2 AUTO CH PRESET AUTO SHUTOFF OFF MANUAL CH PRESET C
Inhaltszusammenfassung zur Seite Nr. 15
Using the TV’s menus If the picture is not clear: MANUAL CH PRESET Fine-tune the TV channel. You can manually preset desired TV channels to desired channels. 1 Press MENU t to select “FINE”. 1 Press MENU T to display the MANUAL FINE “MENU 3” menu, then select SKIP NO SOUND SYSTEM B/G “MANUAL CH PRESET”. EXIT MENU 3 SELECT BY PR 3 VL AUTO CH PRESET PROGRAM BY -+ EXIT BY MANUAL CH PRESET FINE BY VOL-+ DISPLAY SETUP TOUR
Inhaltszusammenfassung zur Seite Nr. 16
Using the TV’s menus SKIP LANGUAGE You can set undesired channels to be You can select the language for the on- skipped. Channels set to be skipped screen display. cannot be selected by the CHANNEL m 1 Press MENU T to display the buttons or the CHANNEL SCAN button. “MENU 3” menu, then select • Channels to which TV channels have not “LANGUAGE”. been preset are automatically set to be skipped. MENU 3 AUTO CH PRESET MANUAL CH PRESET 1 Press MENU T to display the SETUP
Inhaltszusammenfassung zur Seite Nr. 17
TV buttons and parts 3 4 5 7 8 9 0 1 2 ON TIMER POWER MENU CHANNEL VOLUME VIDEO AUDIO EXIT IN 1 2 3 4 5 6 7 8 9 0 MENU CHANNEL VOLUME ON TIMER POWER VIDEO AUDIO EXIT IN 7 Remote control sensor 1 Headphone jack 8 ON TIMER lamp 2 VIDEO/AUDIO terminal The light is switched on while 3 MENU buttons ON TIMER function is operating. • MENU button 9 POWER lamp • MENU m buttons When the Main power is on, 4 CHANNEL m buttons the light is red. 5 VOLUME m buttons 0 Main power button
Inhaltszusammenfassung zur Seite Nr. 18
Using the buttons on the TV Basic operation Operating menus Check to make sure the CHILD LOCK You can operate functions in menus using function is set to “OFF”. When the CHILD the front control buttons on the TV. LOCK function is set to “ON”, the TV 1 Press MENU y to display a menu. cannot be operated using the front control buttons. For details, see “CHILD LOCK” on 2 Press MENU y repeatedly to display page 13. the menu you want to use. 1 Press CHANNEL M to turn the TV 3 Press MENU y to select t
Inhaltszusammenfassung zur Seite Nr. 19
Troubleshooting If there is no picture or the TV does not operate normally, make sure the problem isn’t due to the reasons indicated below. If the problem persists even after taking the measures indicated, please contact a service technician. Cannot turn the TV on Poor picture •Press the Main power button on the TV. •Press the COLOUR SYSTEM button to select another colour system. (see page 8.) • Connect the power cord to the AC outlet. •Adjust the picture settings. (see page 16.) • Set the Pictu
Inhaltszusammenfassung zur Seite Nr. 20
Specifications Model AV-21Y211 AV-16N211 TV RF systems B, G, I, D, K, M Colour systems PAL, SECAM, NTSC3.58 / 4.43 MHz Channel and frequencies VHF low channel (VL) = 46.25 to 140.25 MHz VHF high channel (VH) = 147.25 to 423.25 MHz UHF channel (U) = 431.25 to 863.25 MHz Receives cable channels in mid band (X to Z, S1 to S10), super band (S11 to S20) and hyper band (S21 to S41). Power input AC110 to 240V, 50 / 60 Hz Power consumption Maximum 90 W, Maximum 85 W, Average 60 W Average 54 W Screen si
