Inhaltszusammenfassung zur Seite Nr. 1
COLOUR TELEVISION EQUALIZER • CINEMA SURROUND • COMPONENT INPUT
Contents
Knowing your TV’s features ....................................................... 3
AV-21DX14
Remote control buttons and basic functions .............................. 4
TV buttons and functions ........................................................... 6
AV-20NX14
Setting up your TV ..................................................................... 7
Basic setting for picture..........................................
Inhaltszusammenfassung zur Seite Nr. 2
Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT 7 If you are not going to use this TV for a long period of time, be sure to EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. disconnect the AC plug from the AC socket. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE 8 The apparatus shall not be exposed to dripping or splashing and that FOLLOWING RULES
Inhaltszusammenfassung zur Seite Nr. 3
Knowing your TV’s features Main features FAVORITE CH (Channel) You can register up to four favorite channels for quick recall with one press. AI VOLUME TV adjusts the volume automatically to the same level for all TV channels to avoid sudden change of the volume when selecting different TV channel. VNR You can reduce the picture noise when viewing noisy TV programmes or video sources. WHITE BALANCE You can choose one of three tones of white to match the video source such as movie, sports, etc. C
Inhaltszusammenfassung zur Seite Nr. 4
Remote control buttons and basic functions No. Press To POWER Turn on or off the TV from standby mode. MENU/OK Display menu and confirm selected function. 5 / ∞ / 2 / 3 Select and adjust menu function. CHANNEL -/+ Select the desired channel number. VOLUME -/+ Adjust the volume level. TV/VIDEO Select TV or video terminal input. MUTING Turn off the volume. Press this button again to resume the volume. DISPLAY Display the programme number or video terminal number and PR list (channel list) on the s
Inhaltszusammenfassung zur Seite Nr. 5
Remote control buttons and basic functions (continued) How to operate menus and menus locations Top menu 2nd menu Location 3rd menu Location MENU INPUT EXT. INPUT P.18 – – To Operation Note DISPLAY P.18 – – Display the MENU Press the MENU/OK button . To exit the MENU, PICTURE PICTURE MODE P.9 – – press the DISPLAY *If you want to PICTURE SETTING P.10 – – button or choose adjust PICTURE WHITE BALANCE P.10 – – EXIT menu. SETTING menu, PICTURE – VNR P.15 Display the top Press 5/∞ buttons to choos
Inhaltszusammenfassung zur Seite Nr. 6
L CHANNE VOLUME V L / MONO R IN (VIDEO-3) CHANNEL VOLUME V L / MONO R IN (VIDEO-3) TV buttons and functions No. Button/terminal Description Page Front of the TV L (main power) Press to turn on or turn off the TV’s main power. – AV-20NX14 POWER lamp Indicate the TV is being turned on or off. – No colour : TV’s main power is being turned off. 98 7 6 5 4 321 Red : TV’s main power is being turned on. TIMER lamp Indicate the OFF TIMER function is being turned on or off. – No colour : The OFF TIME
Inhaltszusammenfassung zur Seite Nr. 7
Setting up your TV CAUTION • Turn off the equipment including the TV before connecting. 1 Connecting the aerial cable. 2 Connecting the compatible main plug to the AC outlet. VHF/UHF outdoor aerial 75-ohm coaxial cable (not supplied) If you connect a VCR, connect the aerial output jack of your VCR 3 Inserting batteries into the remote control. and the aerial jack on the TV with the aerial cable. Then connect the Insert two batteries by following the + and - output jacks of your VCR and the VIDEO
Inhaltszusammenfassung zur Seite Nr. 8
Setting up your TV (continued) 5 Making the initial settings Set up your TV by pressing any button except POWER button, then operate the TV menu by following the steps as below: LANGUAGE AUTO PROGRAM AUTO PROGRAM EDIT ENGLISH PR CH/CC SETUP TOUR RESTART? êìëëäàâ 7 CH 09 CH 12 8 CH 11 22% MELAYU 9 CH 13 3 INDONESIA OK RESTART 10 NO 11 12 . BACK 13 OK BACK INSERT OK OK MOVE DELETE MANUAL . • Press 5/∞ button to • TV will start searching • Press the red but
Inhaltszusammenfassung zur Seite Nr. 9
Basic setting for picture COLOUR SYSTEM PICTURE MODE You can select the appropriate colour system when the picture is You can choose the desired picture setting with one-touch. not clear or no colour appears. Press the PICTURE MODE button to select a setting. Press the COLOUR SYSTEM button to select a setting. SOFT Softens contrast and sharpness. BRIGHT Heightens contrast and sharpness. AUTO PAL SECAM NTSC3.58 STANDARD Standard picture setting. USER You can change this picture
Inhaltszusammenfassung zur Seite Nr. 10
Basic setting for picture (continued) Adjusting the picture – USER WHITE BALANCE You can adjust the desired picture setting when selecting USER You can change the white balance of the picture to better match in PICTURE MODE. the type of video being viewed. Select the WHITE BALANCE in the PICTURE menu, then choose 1 Select the USER in PICTURE MODE under PICTURE menu. ❇ the desired setting. PICTURE menu MENU PICTURE MODE ❇ USER MENU PICTURE menu WHITE BALANCE 2 Select the PICTURE SETTING in PICTUR
Inhaltszusammenfassung zur Seite Nr. 11
Advanced setting for picture COMPRESS (16:9) BLUE BACK You can convert a normal picture (4:3 aspect ratio) into a wide You can set the TV to automatically change to a blue screen and picture (16:9 aspect ratio). mute the sound if the signal is weak or absent, or when there is Select the COMPRESS (16:9) in the PICTURE FEATURES menu no input from an antenna. under PICTURE menu, then choose ON or OFF. Select the BLUE BACK in the INSTALL menu, then choose ON or ❇ PICTURE menu MENU PICTURE FEATURES m
Inhaltszusammenfassung zur Seite Nr. 12
Basic setting for sound SOUND SYSTEM SOUND MODE You can select an appropriate sound system when abnormal You can choose the desired sound setting. sound occurs even when the picture appears normally. Select the SOUND MODE in SOUND menu, then choose the Press the SOUND SYSTEM button to select a setting. setting. ❇ MENU SOUND menu B/G I D/K M SOUND MODE . . USER You can change this sound setting as you like. This function is not available in video mode. Select USER and adjust the
Inhaltszusammenfassung zur Seite Nr. 13
Advanced setting for sound CINEMA SURROUND EQUALIZER You can enjoy an enhanced sound for wider audience. You can adjust the sound frequencies when selecting USER Press the CINEMA SURROUND button to select a setting. mode in SOUND MODE. OFF Cancel the function. 1 Select the USER in SOUND MODE under SOUND menu. ❇ LOW Listen to sound with less wider audience effect. MENU SOUND menu SOUND MODE USER HIGH Listen to sound with more wider audience effect. 2 Select the EQUALIZER in SOUND menu. MONO Liste
Inhaltszusammenfassung zur Seite Nr. 14
Favorite channel and video setting To register the favorite channel 4 Select the desired item that you wish to adjust. CONTRAST BRIGHT SHARP COLOUR You can register and recall 4 favorite channels by using the colour buttons (red, green, yellow, blue). SOUND MODE (USER, DYNAMIC, MUSIC, NEWS) TINT 1 In TV mode, select a TV channel (PR01-99) you desired to register. 5 Press the MENU/OK button to exit the menu. 2 Press and hold a colour button for 3 seconds or more. To adjust the v
Inhaltszusammenfassung zur Seite Nr. 15
Customized setting VNR CHILD LOCK You can reduce the noise. You can disable the front control buttons of the TV. Select the VNR in the PICTURE FEATURES menu under Select the CHILD LOCK in the FEATURES menu, then choose PICTURE menu, then choose a setting of VNR function. ON or OFF. ❇ ❇ PICTURE menu FEATURES menu MENU PICTURE FEATURES menu MENU CHILD LOCK VNR OFF TIMER OFF VNR is turned off. You can set the TV to turn off automatically to standby mode after AUTO Effect of VNR is automatically con
Inhaltszusammenfassung zur Seite Nr. 16
Customized setting (continued) AUTO SHUTOFF EXT. INPUT (TV/VIDEO) You can set the TV to turn off automatically when no signal is You can select TV or video terminal input with one touch. received for about 15 minutes or longer after the end of a Press the TV/VIDEO button to select an input. broadcast. To operate this function with a menu: Select AUTO SHUTOFF in INSTALL menu, then choose ON or ❇ MENU INPUT menu EXT. INPUT OFF. ❇ MENU INSTALL menu AUTO SHUTOFF DISPLAY The AUTO SHUTOFF function doe
Inhaltszusammenfassung zur Seite Nr. 17
TV channel presetting 2 Choose EDIT/MANUAL, then press the MENU/OK button. To register the TV channels automatically EDIT menu appears. You can register the TV channels into the TV’s channel list EDIT automatically. PR CH/CC 1 Display the INSTALL menu. 7 CH 09 8 CH 11 ❇ INSTALL menu 9 CH 13 3 MENU 10 11 2 Choose AUTO PROGRAM, then press the MENU/OK button. 12 13 AUTO PROGRAM function starts, and the channels received BACK INSERT OK MOVE DELETE are registered in the chan
Inhaltszusammenfassung zur Seite Nr. 18
TV channel presetting (continued) To edit the channel list (PR LIST) To add in the new channel (MOVE and DELETE in the EDIT menu) (INSERT in the EDIT menu) You can edit the TV channel list as you like. You can add in the new channel in the TV channel list as you like. Note: After this operation, other channel’s PR numbers will be You need to find the “CH/CC” number for the TV channel. Find the changed. “CH/CC” number corresponding to the channel number of the TV channel from the attached sheet “
Inhaltszusammenfassung zur Seite Nr. 19
TV channel presetting (continued) CH US CCIR OIRT AUSTRALIA CC US CCIR OIRT AUSTRALIA CH/CC number CH 33 US-33, W+48 E33 CC 18 E S-18 CH 34 US-34, W+49 E34 CC 19 F S-19 CH 35 US-35, W+50 E35 CC 20 G S-20 When you want to use the INSERT CH 36 US-36, W+51 E36 CC 21 H S-21 function on page 18, find the CH/CC CH 37 US-37, W+52 E37 CC 22 I S-22 CH 38 US-38, W+53 E38 CC 23 J S-23 number corresponding to the channel CH 39 US-39, W+54 E39 CC 24 K S-24 CH 40 US-40, W+55 E40 CC 25 L S-25 number of the TV
Inhaltszusammenfassung zur Seite Nr. 20
R ID 3 R ID 3 V L / MONO IN (V EO- ) V L / MONO IN (V EO- ) Additional preparation Before connecting Connecting to rear component/video input • Read the manuals provided with the devices for the proper terminal and output terminal connection. Rear of TV • Turn off all the devices including the TV. • Note that connecting cables are not supplied. VCR (for playing) COMPONENT VIDEO-1 (VIDEO-2) OUTPUT DVD player (composite signals) INPUT INPUT Connecting to front video input terminal . VCR (for re
