Inhaltszusammenfassung zur Seite Nr. 5
FD mini-IB 1/16/01 3:33 PM Page 5 13 For added protection of the TV set during a lightning storm or when the TV set is to be left unattended for an extended period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to product due to lightning storms or power line surges. 14 A TV set and cart combination should be moved with care. Quick stops, excessive force, and uneven sur- faces may cause the TV set and cart combination to overturn. SERVICE 15 Unplu
Inhaltszusammenfassung zur Seite Nr. 6
FD mini-IB 1/16/01 3:33 PM Page 6 Unpacking Your Television Thank you for your purchase of a JVC Color Television. Before you begin setting up your new television, please check to make sure you have all of the following items. In addition to this guide, your television box should include: 1 Remote Two AA 1 Television Control Batteries TV CATV VCR DVD POWER INPUT VIDEO STATUS 1 2 3 BBE 4 5 6 DISPLAY 7 8 9 0 SLEEP TIMER 100+ RETURN+ HYPER SURROUND LIGHT A matching TV stand RM-C303G MUTING V
Inhaltszusammenfassung zur Seite Nr. 7
FD mini-IB 1/16/01 3:33 PM Page 7 Quick Setup 1 Getting Started These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away. This information includes basic instructions on operating your remote control, making a simple cable/antenna and optional VCR connection and, finally, information on programming your television's Auto Tuner. If you have questions, or for more detailed information on any of these steps,
Inhaltszusammenfassung zur Seite Nr. 8
FD mini-IB 1/16/01 3:33 PM Page 8 Quick Setup 2 Step Two - Making Basic Connections Next you will need to connect your television to an antenna or cable system. The most basic antenna/cable connection is shown below. For more detailed connections, such as ones where a cable box is required, see pages 11 and 12. WALL CABLE or ANTENNA Cable/RF connector OUT INPUT 1 INPUT 2 S-VIDEO COMPONENT VIDEO OVER 75Ω VIDEO VIDEO/Y (VHF/UHF) AUDIO OUT AUDIO INPUT 1 INPUT 2 S-VIDEO COMPONENT VIDEO VIDEOOVER
Inhaltszusammenfassung zur Seite Nr. 9
FD mini-IB 1/16/01 3:33 PM Page 9 Quick Setup 3 Step Three - Auto Tuner Setup JVC’s onscreen menu system lets you set your television up to meet your own personal viewing preferences. The menu screens and their features are discussed in detail in this book. The menu settings are optional, you can set as many or as few of them as you wish. But to begin watching your television right away you will need to run the Auto Tuner Setup. This lets your television learn the channels it is able to recei
Inhaltszusammenfassung zur Seite Nr. 10
FD mini-IB 1/16/01 3:33 PM Page 10 Table of Contents Quick Setup Guide ....7 BUTTON FUNCTIONS CONNECTIONS Menu...................39 Exit....................39 Cable and VCR Connections .......11 Display ..................39 Connecting to a DVD Player .......13 Video Status ...............40 Headphone Connection .........13 Sleep Timer ................40 Connecting to an External Amplifier . . . 14 Hyper Surround .............40 Connecting to a Camcorder .......14 Muting ..................40 B
Inhaltszusammenfassung zur Seite Nr. 11
FD mini-IB 1/16/01 3:33 PM Page 11 Connections Cable and VCR Connections There are two basic types of antenna or cable connections: • If you have an antenna or have a cable system that does not require you to use a cable box to select channels, please refer to Diagram #1. • If you have a cable system that requires the use of a cable box to access any or all the channels, please refer to Diagram #2. • For your convenience, connection to a VCR is also shown in the following diagrams. A VCR
Inhaltszusammenfassung zur Seite Nr. 12
FD mini-IB 1/16/01 3:33 PM Page 12 Connections Cable and VCR Connections - Continued WALL Diagram #2 CABLE or ANTENNA OUT VCR IN OR INPUT 1 INPUT 2 S-VIDEO COMPONENT VIDEO OVER OR 75Ω VIDEO VIDEO/Y (VHF/UHF) AUDIO OUT AUDIO INPUT 1 INPUT 2 S-VIDEO COMPONENT VIDEO VIDEOOVER VIDEO/Y 75Ω AUDIO OUT AUDIO (VHF/UHF) L L R R R R R R Illustration of AV-27D302 1) Connect the antenna or cable TV wire from the wall outlet, to the RF Input of the cable box. 2) Connect an RF cable from the RF Output of
Inhaltszusammenfassung zur Seite Nr. 13
FD mini-IB 1/16/01 3:33 PM Page 13 Connections Connecting to a DVD player DVD Player AUDIO OUT R L Y Green PB INPUT 1 INPUT 2 Blue PR Red S-VIDEO COMPONENT VIDEO OVER 75Ω VIDEO VIDEO/Y (VHF/UHF) AUDIO OUT AUDIO INPUT 1 INPUT 2 S-VIDEO COMPONENT VIDEO OVER VIDEO VIDEO/Y (VHF/UHF) 75Ω AUDIO OUT AUDIO L L R R R R R R Illustration of AV-27D302 1) Connect Green cable out from DVD player “Y” Component Output, in to TV “Y” Component Input. 2) Connect Blue cable out from DVD player “PB” Compone
Inhaltszusammenfassung zur Seite Nr. 14
FD mini-IB 1/16/01 3:33 PM Page 14 Connections Connecting to an External Amplifier INPUT 1 INPUT 2 S-VIDEO COMPONENT VIDEO OVER 75Ω VIDEO VIDEO/Y (VHF/UHF) AUDIO OUT AUDIO INPUT 1 INPUT 2 S-VIDEO COMPONENT VIDEO VIDEOOVER VIDEO/Y 75Ω AUDIO OUT (VHF/UHF) L AUDIO L R R R R R R Illustration of AV-27D302 1) Connect the white audio cable from the TV’s Left Audio Output jack to the Amplifier’s Left Audio Input jack. 2) Connect the red audio cable from the TV’s Right Audio Output jack to the Ampl
Inhaltszusammenfassung zur Seite Nr. 15
FD mini-IB 1/16/01 3:33 PM Page 15 Remote Control Remote Control Basics Before you can operate the remote control, you must first install TV CATV VCR DVD • POWER the batteries (included). See “Changing the Batteries” at the bottom of this page for instructions. (For an illustration, please see page 7.) INPUT Press the POWER button to turn the television on or off. • VIDEO STATUS Make sure the TV/CATV switch is set to TV. Move the switch to 1 2 3 • CATV only if you need to operate a cable box
Inhaltszusammenfassung zur Seite Nr. 16
FD mini-IB 1/16/01 3:33 PM Page 16 Remote Programming Setting the CATV, VCR and DVD Codes You can program your remote to operate your cable box, satellite receiver, VCR or DVD player by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer. Cable Box or Satellite codes The remote control is programmed with CATV and/or Satellite codes for power on, po
Inhaltszusammenfassung zur Seite Nr. 17
FD mini-IB 1/16/01 3:33 PM Page 17 Remote Programming VCR codes The remote control is programmed with VCR codes for power on, power off, play, stop, fast-forward, rewind, pause, record, channel up, and channel down operation. 1) Find the VCR brand from the list of codes shown below. 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”. 3) Press and hold down the DISPLAY button. 4) With the DISPLAY button held down, enter the first code number list
Inhaltszusammenfassung zur Seite Nr. 18
FD mini-IB 1/16/01 3:33 PM Page 18 Remote Programming DVD codes The remote control is programmed with DVD codes for power on, power off, play, stop, fast-forward, rewind, previous chapter, next chapter, tray open/close, and still/pause operation. 1) Find the DVD player brand from the list of codes shown below. 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”. 3) Press and hold down the DISPLAY button. 4) With the DISPLAY button held down, ente
Inhaltszusammenfassung zur Seite Nr. 19
FD mini-IB 1/16/01 3:33 PM Page 19 Onscreen Menus Using the Guide Certain symbols are used throughout this guide to help you learn about the features of your new television. The ones you will see most frequently are: ❷ Up and Down arrows mean press the CH+ or CH- buttons. Pressing the CH+ or CH- buttons let you: • Move vertically in a main menu screen • Move through a submenu screen • Move to the next letter, number, or other choice in a submenu • Back up to correct an error • Scan th
Inhaltszusammenfassung zur Seite Nr. 20
FD mini-IB 1/16/01 3:33 PM Page 20 Initial Setup Auto Tuner Setup If you have already run the Auto Tuner as part of the quick setup earlier in this guide, please skip ahead to “Channel Summary” to continue setting up your television. In Auto Tuner Setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the CHANNEL +/- buttons) you will receive only clear, active cha
Inhaltszusammenfassung zur Seite Nr. 1
FD mini-IB 1/16/01 3:33 PM Page 1
For models:
AV-27D302
AV-27D202
AV-20D202
COLOR TELEVISION
AV-27230
USER'S GUIDE
Illustration of AV-27D302 and RM-C303G
IMPORTANT NOTE TO THE CUSTOMER
In the spaces below, enter the model and serial number of your television (located
at the rear of the television cabinet). Staple your sales receipt or invoice to the
inside cover of this guide. Keep this user's guide in a convenient place for
future reference. Keep the carton and original packaging for future
Inhaltszusammenfassung zur Seite Nr. 2
FD mini-IB 1/16/01 3:33 PM Page 2 IMPORTANT SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:To reduce the risk of electric shock. Do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dan- gerous voltage” within the product’s enclosure that may be of sufficient magnitude to const
Inhaltszusammenfassung zur Seite Nr. 3
FD mini-IB 1/16/01 3:33 PM Page 3 IMPORTANT SAFEGUARDS CAUTION: Please read and retain for your safety. Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to assure your personal safety. But improper use can result in poten- tial electrical shock or fire hazards. In order not to defeat the safeguards incorporated in this TV set, observe the following basic rules for its installation, use and servicing. And also follow all warnings and instruc
Inhaltszusammenfassung zur Seite Nr. 4
FD mini-IB 1/16/01 3:33 PM Page 4 7 An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE 8 TV sets are provided with ventilation openings in t
