Inhaltszusammenfassung zur Seite Nr. 1
Contents
2
Safety precautions
Preparation 3
..
1 Confirm which remote control you have 3
..
COLOUR TELEVISION 2 Insert the batteries into the remote control 3
..................
3 Connecting the aerial and VCR 4
..........................
4 Connecting other devices 5
INSTRUCTIONS ......
5 Connect the power cord to the AC outlet 5
..............................................
6 SETUP TOUR 6
Thank you for buying this JVC colour
Basic operation 7
television.
Remote control buttons and functions 8
Inhaltszusammenfassung zur Seite Nr. 2
Safety precautions WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV. •Operate only from the power source specified on the TV. •Avoid damaging the power cord and main plug. When you unplug the TV, pull it out by the main plug. Do not pull on the power cord. •Never block or cover the cabinet opening for ventilation. Never install the TV where 15 cm good ventilation
Inhaltszusammenfassung zur Seite Nr. 3
Preparation 1 Confirm which remote control you have Your TV comes with one of the three remote controls shown below. Functions you can operate differ depending on the type of remote control. RM-C1306 RM-C1308 RM-C1313 For TV model: For TV model: For TV model: AV-21V311 AV-21V331 AV-16N311 AV-21W311 AV-25V331 AV-21Y311 AV-25V311 AV-29V331 AV-29V311 PICTURE MUTING POWER MUTING BASS POWER MUTING BOOSTER POW
Inhaltszusammenfassung zur Seite Nr. 4
Preparation 3 Connecting the aerial and VCR •Read the manuals provided with the devices. Depending on the device, the connection method may be different from the diagrams. Also the device settings may need to change depending on the connection method. •Turn off all the devices including the TV. • Connecting cables are not supplied. • When connecting monaural audio to the TV, use the L/MONO jack. • The AV-21Y311 and AV-16N311 are supplied with rod aerial but without matching aerial adapters. •You
Inhaltszusammenfassung zur Seite Nr. 5
Preparation 4 Connecting other devices If you are not connecting any other devices, skip step 4 and perform step 5. • Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off. • The OUTPUT terminal outputs the video and sound signals which you are viewing on the TV. You can dub them onto the VCR connected to the OUTPUT terminal. (The OUTPUT terminal cannot output S-VIDEO signals or component video signals. Also it cannot output any
Inhaltszusammenfassung zur Seite Nr. 6
Preparation 6 SETUP TOUR When the TV is first turned on, it enters the SETUP TOUR mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR. • In case of resetting that the reason for such as removal, you can set the AUTO CH PRESET function on the “MENU 3” menu. For details, see page 15. 1 Press the Main power button on the TV. The POWER lamp lights. After the JVC logo has been displayed, the TV automatically switches to the language setting
Inhaltszusammenfassung zur Seite Nr. 7
Basic operation The illustration below is for the remote 1 Press the POWER button to control RM-C1308. Your remote control turn your TV on. may not look exactly like the • If your TV does not turn on, press the illustration. Main power button on the TV, then press the POWER button again. •You can also turn on your TV by pressing any of the following buttons; - the CHANNEL m button POWER MUTING BASS - the Number buttons SYSTEM CINEMA COLOUR SOUND SURROUND - the TV/VIDEO button ECO DISPLAY SENSO
Inhaltszusammenfassung zur Seite Nr. 8
Remote control buttons and functions MUTING button COLOUR SYSTEM button You can turn the sound off instantly. If the picture is not clear or no colour appears, change the current colour Press this button. system to another colour system. To turn the sound on, press this button Press this button to select the colour again. system. AUTO PAL SECAM BASS button NTSC4.43 NTSC3.58 AUTO: You can enjoy a powerful bass sound by using the BASS (Bass Reflex) function. A
Inhaltszusammenfassung zur Seite Nr. 9
Remote control buttons and functions CINEMA SURROUND button ECO SENSOR button contrast according to the brightness of your room. This function reduces eye You can enjoy an enhanced sound for a strain and the power consumption of wider audience by using CINEMA this TV. SURROUND function. Press this button to select the desired Press this but
Inhaltszusammenfassung zur Seite Nr. 10
Remote control buttons and functions PICTURE MODE button RETURN + button You can select one of three picture You can set a channel you frequently adjustment settings as you like. view to the Return Channel and you can view that channel at any time with one- Press this button to select a mode. touch. BRIGHT: To set the channel to the Return Channel: Heightens contrast and sharpness. 1 Select the channel you want to set STANDARD: to the Return Channel. Standardizes picture adjustments. 2 Press thi
Inhaltszusammenfassung zur Seite Nr. 11
Remote control buttons and functions CHANNEL SCAN button You can quickly view all TV channels programmes that you can view on your TV, and search for the programme you want to view. 1 Press this button to start scanning TV channels. The TV channel programmes are each displayed for several seconds. • The programmes of TV channels for which the SKIP function is set to “YES” are not displayed. 2When you find the programme you want to view, press this button again to stop scanning. FA
Inhaltszusammenfassung zur Seite Nr. 12
Using the TV’s menus This TV has a number of functions you can operate using the menus. To use all your TV’s functions fully, you need to understand how to use the menus. 3 Repeatedly press the MENU T buttons to select SYSTEM CINEMA a desired function. COLOUR SOUND SURROUND ECO DISPLAY DISPLAY SENSOR 4 Press the CHANNEL –/+ or the button MENU t MENU / buttons to change MENU buttons MENU / function settings. buttons TV/VIDEO Example: 123 OFF Changes the AUTO TIMER 456 SHUTOFF set
Inhaltszusammenfassung zur Seite Nr. 13
Using the TV’s menus INPUT VNR You can view images from VCRs or other You can reduce picture noise. devices connected to your TV. 1 Press MENU T to display the 1 Press MENU T to display the “MENU 1” menu, then select “MENU 1” menu, then select “VNR”. “INPUT”. MENU 1 INPUT TV MENU 1 VNR ON INPUT TV COMPRESS(16:9) ON VNR ON PICTURE TILT 00 COMPRESS(16:9) ON PICTURE TILT
Inhaltszusammenfassung zur Seite Nr. 14
Using the TV’s menus AUTO SHUTOFF BLUE BACK You can set your TV to turn off if no If no signal is being received or the signal signals are received for about 15 minutes is very weak, a blue screen automatically becomes the picture background. or longer after the end of a broadcast. If you wish to continue viewing the poor 1 Press MENU T to display the picture, you must set the BLUE BACK “MENU 2” menu, then select function to “OFF”. “AUTO SHUTOFF”. 1 Press MENU T to display the MENU
Inhaltszusammenfassung zur Seite Nr. 15
Using the TV’s menus AUTO CH PRESET SETUP TOUR You can automatically preset all TV You can start the SETUP TOUR function. channels that can be received by your 1 Press MENU T to display the TV to channels. “MENU 3” menu, then select 1 Press MENU T to display the “SETUP TOUR”. “MENU 3” menu, then select MENU 3 “AUTO CH PRESET”. AUTO CH PRESET MANUAL CH PRESET SETUP TOUR MENU 3 LANGUAGE ENGLISH AUTO CH PRESET MANUAL CH PRESET
Inhaltszusammenfassung zur Seite Nr. 16
Using the TV’s menus If the picture is not clear: MANUAL CH PRESET Fine-tune the TV channel. You can manually preset desired TV channels to desired channels. 1 Press MENU t to select “FINE”. 1 Press MENU T to display the MANUAL FINE “MENU 3” menu, then select SKIP NO SOUND SYSTEM B/G “MANUAL CH PRESET”. EXIT MENU 3 SELECT BY PR 1 VL AUTO CH PRESET PROGRAM BY -+ EXIT BY MANUAL CH PRESET FINE BY VOL-+ DISPLAY SETUP TOUR
Inhaltszusammenfassung zur Seite Nr. 17
Using the TV’s menus 2 Press CHANNEL –/+ or MENU / SKIP to select “ON”. You can set undesired channels to be To cancel the SUPER BASS function, skipped. Channels set to be skipped select “OFF”. cannot be selected by the CHANNEL m buttons or the CHANNEL SCAN button. • Channels to which TV channels have not Picture Adjustments been preset are automatically set to be skipped. You can adjust the picture as you like. 1 Press MENU T to display the 1 Press MENU T to display the “MENU 3” menu, then sele
Inhaltszusammenfassung zur Seite Nr. 18
Using the TV’s menus AI VOLUME FAVORITE CH SETTING You can prevent the sudden increase or You can set PICTURE MODE, VNR and decrease of volume that occurs when PICTURE EFFECT functions for the changing channels or switching VIDEO favorite channels using FAVORITE CH modes. SETTING menu. 1 Press MENU T to display the 1 Press MENU T to display the “MENU 5” menu, then select “MENU 6“ menu, then select “FAVORITE CH SETTING”. “AI VOLUME”. MENU 5 MENU 6 BASS FAVORITE
Inhaltszusammenfassung zur Seite Nr. 19
Using the TV’s menus VIDEO SETTING AI ECO SENSOR You can set PICTURE MODE, VNR and You can enable this function so that the PICTURE EFFECT functions for VIDEO brightness of TV screen is automatically mode using VIDEO SETTING menu. adjusted according to the brightness of your room. 1 Press MENU T to display the “MENU 6” menu, then select 1 Press MENU T to display the “VIDEO SETTING”. “MENU 6” menu, then select “AI ECO SENSOR”. MENU 6 FAVORITE CH SETTING MENU 6
Inhaltszusammenfassung zur Seite Nr. 20
Attaching the Twin Port Bass Blaster Unit The Twin Port Bass Blaster Unit is packaged together with the TV. Before you use the TV, mount the Twin Port Bass Blaster unit correctly on the TV. Note: • The BASS functions do not work unless the Twin Port Bass Blaster Unit is connected correctly to the TV. For details on the BASS functions, see page 8. CAUTION: • The Twin Port Bass Blaster Unit is just placed on top of the TV and is not held in place by a screw. Wh
