Inhaltszusammenfassung zur Seite Nr. 1
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 1
DIGITAL
TELEVISION
SP43W6
SP42Q2
SP43Q5
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
TELETEXT
SELF FOCUS
Register your product at www.samsung.com/global/register
Inhaltszusammenfassung zur Seite Nr. 2
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 2 S p sh g p W p sh m sc p A g d g b im O fo B ag y
Inhaltszusammenfassung zur Seite Nr. 3
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 3 Important Warranty Information Regarding Television Format Viewing Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen pictures
Inhaltszusammenfassung zur Seite Nr. 4
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 4 Contents ◆ FOREWORD ■ Important Warranty Information Regarding Television Format Viewing........ 3 ◆ CONNECTING AND PREPARING YOUR TELEVISION ■ Control Panels (depending on the model)..................................................... 6 ■ Connection Panels (depending on the model) .............................................. 7 ■ Using a Display Deck (depending on the model) .......................................... 8 ■ Inserting the Batter
Inhaltszusammenfassung zur Seite Nr. 5
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 5 Contents (continued) ◆ SETTING THE CHANNELS (ANALOG TV) (continued) ■ Locking the Channel...................................................................................... 48 ■ Fine Tuning Channel Reception.................................................................... 49 ◆ USING YOUR TELEVISION ■ Using the LNA (Low Noise Amplifier) Feature............................................... 50 ■ Changing the Picture Standard ..............
Inhaltszusammenfassung zur Seite Nr. 6
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 6 Control Panels (depending on the model) The actual configuration on your TV may be different, depending on ➢ ➢ your model. SP43W6 SP42Q2 SP43Q5 ( e ) Channel Selection ( a ) Input Source Selection ( f ) Remote Control Sensor ( b ) Menu Display ( g ) Standby & Timer Indicator ( c ) Accessing to the Selected Option on the Menu System ( h ) Power On/Off ( d ) Volume Adjustment ( i ) Picture On/Off ◆ You can use the C/P. buttons to switch on the
Inhaltszusammenfassung zur Seite Nr. 7
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 7 Connection Panels (depending on the model) n The actual configuration on your TV may be different, depending on ➢ your model. Side of the TV ( a ) Video Input ( b ) Audio Input ( c ) S-Video Input Rear of the TV Common Interface Component Input Audio Output 75 Ω Coaxial SCART Audio/Video Connector for Aerial Input/Output or Cable Network Service Port ◆ Please be sure to match the colour coded input terminals and cable jacks. ➢ ◆ For further de
Inhaltszusammenfassung zur Seite Nr. 8
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 8 Using a Display Deck (depending on the model) You can display a VCR or DVD Player, etc. by using the display deck. SP43W6 Inserting the Batteries in the Remote Control You must insert or replace the batteries in the remote control when you: ◆ Purchase the television ◆ Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol ( ) downwards and then pulling firmly to
Inhaltszusammenfassung zur Seite Nr. 9
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 9 Infrared Remote Control TELEVISION STANDBY TELETEXT DISPLAY/ MIX BOTH TELETEXT INFORMATION AND THE NORMAL BROADCAST MAKE THE REMOTE CONTROL WORKS FOR TV, STB, VCR, CABLE, DVD PLAYER SWITCH BETWEEN TV AND DTV MODE DIRECT CHANNEL SELECTION EPG DISPLAY/ ONE OR TWO-DIGIT CHANNEL DTV CHANNEL LIST DISPLAY SELECTION NEXT CHANNEL/ VOLUME INCREASE TELETEXT NEXT PAGE EXTERNAL INPUT SELECTION/ TEMPORARY SOUND SWITCH-OFF TELETEXT MODE (LIST/FLOF) SELECTION
Inhaltszusammenfassung zur Seite Nr. 10
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 10 Connecting to an Aerial or Cable Television Network To view television channels correctly, a signal must be received by the set from one of the following sources: ◆ An outdoor aerial ◆ A cable television network ◆ A satellite network 1 In the first three cases, connect the aerial or network input cable to Rear of the TV the ANT IN on the rear of the television. 2 If you are using an indoor aerial, you may need to adjust it when or tuning your
Inhaltszusammenfassung zur Seite Nr. 11
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 11 Connecting a Satellite Receiver or Decoder In order to watch television programmes broadcast via a Rear of the TV satellite network, you must connect a satellite receiver to the rear of TV. Also, in order to descramble a coded transmission signal, you must connect a decoder to the rear of TV. ◆ Using a SCART cable o Connect the receiver (or decoder) SCART cable to one of the SCART connectors on the rear of the television. ◆ Using a coaxial cab
Inhaltszusammenfassung zur Seite Nr. 12
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 12 Switching Your Television On and Off The mains lead is attached to the rear of your television. T 1 Plug the mains lead into an appropriate socket. The main voltage is indicated on the rear of the television T ➢ and the frequency is 50 or 60Hz. th 2 Press the “ I ” button (On/Off) on the front or side of the television. Result: The Standby indicator on the front of the television lights up. 3 Press the POWER() button on the remote control to
Inhaltszusammenfassung zur Seite Nr. 13
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 13 Becoming Familiar with the Remote Control The remote control is used mainly to: ◆ Change channels and adjust the volume ◆ Set up the television using the on-screen menu system The following table presents the most frequently used buttons and their functions. . Button Viewing Function Menu Function Used to display the next - stored channel. Used to display the - previous stored channel. to Used to display the corresponding channels. For double
Inhaltszusammenfassung zur Seite Nr. 14
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 14 Plug and Play Feature When the television is initially powered on, three basic customer settings proceed automatically and subsequently: setting the Plug & Play language, channel and clock. Start Plug & Play OK 1 If the television is in Standby mode, press the POWER() Enter Return button on the remote control. Result: The message Start Plug & Play is displayed. Setup TV 2 To start the Plug & Play, press the ENTER() button. English Time Deutsc
Inhaltszusammenfassung zur Seite Nr. 15
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 15 Plug and Play Feature (continued) 8 When you have finished, press the MENU() button. Result: The menu is turned to Auto Store in DTV mode automatically. d If you want to reset this feature... Not available in DTV mode. ➢ 1 Press the MENU() button. Setup TV Time √ √ Result: The main menu is displayed. Plug & Play √ √ Language : English √ √ 2 Press the ▲ or ▼ button to select Setup. Self Focus √ √ Result: The options available in the Setup group
Inhaltszusammenfassung zur Seite Nr. 16
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 16 Changing Channels It may take some time to display a channel if your chosen channel ➢ has the MHEG feature. Y Using the P buttons. / by Press the P button on the remote control ( C/P. on the / front of TV). The TV changes channels in sequence. You can select all channels (analog and digital channels) that the TV has memorized. You can not select channels that were either erased or not ➢ memorized. Using the numeric (0~9) buttons. Press the nu
Inhaltszusammenfassung zur Seite Nr. 17
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 17 Displaying Information You can view the channel information and setting status you select by pressing the “INFO ( )” button on the remote control. P 1 Mono Picture :Dynamic Sound :Custom 12 : 02 Choosing Your Language g d When you start using your television for the first time, you must select the language which will be used for displaying menus and Setup TV indications. Time √ √ Plug & Play √ √ Language : English √ √ s 1 Press the MENU(
Inhaltszusammenfassung zur Seite Nr. 18
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 18 Adjusting the Screen Automatically (Self Focus) The “Self Focus” feature automatically finds the optimum picture T b quality when blurring, overlapping colours or incorrect focus TV Setup o occurs. These conditions may be caused by moving your TV. Time √ √ “S Plug & Play √ √ m 1 Press the MENU() button. Language : English √ √ Self Focus √ √ Result: The main menu is displayed. Blue Screen : Off √ √ ▼ More 2 Press the ▲ or ▼ button to select Set
Inhaltszusammenfassung zur Seite Nr. 19
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 19 Deactivating the Automatic Execution of the Self Focus The “Self Focus” feature starts on default. It will automatically begin 10 minutes after switching on the power and the appearance TV Setup of the screen image. To set the optimum picture quality, the Time √ √ “Self Focus” will automatically begin again after another 30 minutes, as the screen image is then fully stabilised. Plug & Play √ √ Language : English √ √ Self Focus √ √ 1 Press t
Inhaltszusammenfassung zur Seite Nr. 20
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 20 Removing the “Self Focus” from the Display ➢ T th 1 Press the MENU() button. TV Setup Result: The main menu is displayed. Time √ √ Plug & Play √ √ 2 Press the ▲ or ▼ button to select Setup. Language : English √ √ Self Focus √ √ Result: The options available in the Setup group are displayed. ➞ Blue Screen : Off √ √ 3 Press the ENTER() button. ▼ More Move Enter Return 4 Press the ▲ or ▼ button to select Self Focus. Press the ENTER () button. Res
