Inhaltszusammenfassung zur Seite Nr. 1
Connecting Additional Equipment
2-670-362-21(1)
Operating Instructions
KD-27FS170
KD-32FS170
KD-36FS170
© 2006 by Sony Corporation
KD-27/32/36FS170
2-670-362-21(1)
Inhaltszusammenfassung zur Seite Nr. 2
User Guide KD-27/32/36FS170 2-670-362-21(1)
Inhaltszusammenfassung zur Seite Nr. 3
WARNING ✍ Pursuant to FCC regulations, you are cautioned that any changes or modifications not expressly approved To reduce the risk of fire or electric shock, do not expose the in this manual could void your authority to operate TV to rain or moisture. this equipment. NOTIFICATION CAUTION RISK OF ELECTRIC SHOCK This equipment has been tested and found to comply with DO NOT OPEN the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provi
Inhaltszusammenfassung zur Seite Nr. 4
IMPORTANT SAFEGUARDS For your protection, please read these instructions Corrosion completely, and keep this manual for future reference. Do not use the set close to the ocean since it may cause the Carefully observe and comply with all warnings, cautions set to be exposed to excess salt, corrosion, and internal and instructions placed on the set, or described in the damage and will deteriorate its performance. If you expose operating instructions or service manual. the TV to these condit
Inhaltszusammenfassung zur Seite Nr. 5
Never cover the slots and openings Service with a cloth or other materials. Damage Requiring Service Unplug the set from the wall outlet and refer servicing to qualified service personnel under the following conditions: Never block the slots and openings When the power cord or plug by placing the set on a bed, sofa, rug or other similar surface. is damaged or frayed. If liquid has been spilled Never place the set in a confined into the set or objects have space, such as a bookc
Inhaltszusammenfassung zur Seite Nr. 6
User Guide Contents Introduction Using the Analog Menus Introducing the FD Trinitron WEGA Overview........................................................18 Features .................................................... 1 Menu Descriptions .......................................18 About this Manual ......................................... 2 Using the Remote Control to Display and Batteries for the Remote Control ................. 2 Navigate the On-Screen Analog Menus..........................
Inhaltszusammenfassung zur Seite Nr. 7
Introduction Introduction ® Congratulations on your purchase of the Sony FD Trinitron WEGA . Introducing the FD Trinitron WEGA Features Some of the features you will enjoy include: ❏ FD Trinitron Flat CRT — Delivers a picture with uncompromising accuracy and outstanding image detail via a technologically advanced tube. ❏ Analog and Digital Receivers — Built-in tuners allow you to receive both analog (NTSC) and digital (ATSC) programming. Digital programming is available only via terrestrial s
Inhaltszusammenfassung zur Seite Nr. 8
About this Manual This manual provides instructions to help you enjoy your new TV. It shows you how to connect to an antenna or cable, cable box, VCR, DVD, satellite receiver or camcorder. Once your TV is connected, follow the instructions and use the remote control to access the on- screen menus. Batteries for the Remote Control Insert two AA batteries (supplied) into the remote control using the following illustration as a guide. ✍ Under normal conditions, batteries will last up to six mont
Inhaltszusammenfassung zur Seite Nr. 9
Remote Control Using the Remote Control Remote Control Description D Indicates feature available only in digital tuning mode. Button Description MUTING POWER DISPLAY 1 MUTING Press to turn off the sound. Press again or press VOL+ A qs to restore sound. B SCREEN PICTURE 2 DISPLAY Press once to display the current time (if set) and the MODE MODE TV/VIDEO C qd program status such as channel number, Channel D Label (if set), video input, Video Label (if set), and Info 1 2 3 Banner (if set). Pre
Inhaltszusammenfassung zur Seite Nr. 10
Button Description qj EXIT Press to exit menus and other on-screen displays. qk SLEEP Press repeatedly until the TV displays the time in minutes (15, 30, 45, 60, or 90) that you want the TV to remain on before shutting off automatically. Cancel by pressing until Sleep Off appears. ✍ If you lose your remote control, see page 36. 4 KD-27/32/36FS170 2-670-362-21(1) Remote Control
Inhaltszusammenfassung zur Seite Nr. 11
Connections Connecting Your TV Read this section before setting up your TV for the first time. This section explains how to make the basic connections and how to connect optional equipment. TV Rear Panel AT ATS SC C 1 2 34 5 Jack Description 1 ATSC This input connects to your VHF/UHF antenna or digital cable box for digital signal (ATSC). 2 VHF/UHF This input connects to your VHF/UHF antenna or cable for analog signal (NTSC). 3 S VIDEO This input connects to the S VIDEO OUT jack on your VCR o
Inhaltszusammenfassung zur Seite Nr. 12
Basic Connections TV with Cable, Indoor, or Outdoor Antenna Depending on the cable system available in your home, choose one of the connections below: 75-ohm (Rear of TV) coaxial cable VHF/UHF 75-ohm coaxial cable ATSC Use option A to connect the TV to a cable system or an antenna with a 75-ohm cable. 300-ohm (Rear of TV) twin cable VHF/UHF Antenna connector Converter EAC-25 or commercially available converter (not supplied) ✍ Converter EAC-25 is commercially known as a 300-to-75 ohm antenna ad
Inhaltszusammenfassung zur Seite Nr. 13
Connections Connecting Additional Equipment Connecting a DVD Player using Composite Video (VIDEO/AUDIO L(MONO),R) Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your DVD player to AUDIO/VIDEO IN on your TV. Rear of TV A ATTS SC C Rear of DVD Player Audio R (red) Optional connection Audio L (white) Video (yellow) Optional connection ❏ For better picture quality, use S VIDEO (located on the rear panel) instead of the yellow video cable. S VIDEO does not provide sound, so you
Inhaltszusammenfassung zur Seite Nr. 14
Connecting a TV and VCR Rear of TV A ATTS SC C 2 VCR 1 Audio R (red) From Audio L (white) cable/antenna Video (yellow) Optional connection 1 Connect the coaxial cable from your TV antenna or cable service to the IN jack on your VCR. 2 Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF jack on the TV. Optional connection ❏ If your VCR is equipped with video outputs, you can get better picture quality by connecting audio/video cables (not supplied) from AUDIO/VI
Inhaltszusammenfassung zur Seite Nr. 15
Connections Connecting a TV and Cable Box Some cable TV systems use scrambled or encoded signals that require a cable box to view all channels. If you subscribe to such type of service, use this connection. Cable box 1 VIDEO AUDIO L AUDIO R LINE OUT From cable/ antenna Rear of TV A ATTSSC C 2 1 Connect the coaxial cable from your cable service to the IN jack on your cable box. 2 Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the VHF/UHF jack on your TV. Optional
Inhaltszusammenfassung zur Seite Nr. 16
Connecting a TV and Satellite Receiver Rear of TV A ATTSSC C From 2 cable/ antenna Satellite receiver 1 Satellite antenna Audio R (red) cable Audio L (white) Video (yellow) 3 1 Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver. 2 Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on your TV. 3 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite receiver to AUDIO/VIDEO IN on your TV. ✍ To watch
Inhaltszusammenfassung zur Seite Nr. 17
Connections Connecting a TV, VCR, and Satellite Receiver using Component Video (YPBPR) From Rear of TV cable/ A ATTS SC C antenna 4 2 1 VCR Satellite Receiver 3 Video (yellow) Audio L (white) Audio R Audio R (red) Y (green) 5 (red) 6 7 PB (blue) Audio L PR (red) (white) 1 Connect the coaxial cable from your satellite antenna to SATELLITE IN on the satellite receiver. 2 Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR. 3 Using a coaxial cables (not supplie
Inhaltszusammenfassung zur Seite Nr. 18
Connecting a Camcorder (for playback) To connect your camcorder, you can use the Audio/Video inputs on either the front or rear panel of the TV. Using the audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your camcorder to AUDIO/VIDEO IN on your TV. Front Panel Audio R (red) Audio L (white) Video (yellow) A/V output Optional connection ❏ For better picture quality, use S VIDEO (located on the rear panel), instead of the yellow video cable. S VIDEO does not provide sound, so you s
Inhaltszusammenfassung zur Seite Nr. 19
Setting Up Setting Up the TV After you have finished connecting your TV, use Auto Program to set up your analog and digital channel lists. During Auto Program, the TV will automatically search for available channels and program receivable channels. ✍ After starting Auto Program, wait until the process is complete to avoid missing some channels that are available. To re-program receivable channels, run Auto Program again as described on page 22 (analog channels) and page 31 (digital channels)
Inhaltszusammenfassung zur Seite Nr. 20
Using the Digital Features Overview This chapter describes how to use the features of your TV that are designed to work with digital channels. Tuning to a Digital Channel This TV is equipped with a built-in digital tuner, which enables you to receive digital channels. In order to enjoy the digital features of this TV, you need to switch the TV between analog and digital tuning modes by pressing the button on the remote control, or by switching between analog and digital tuning modes using t
