Inhaltszusammenfassung zur Seite Nr. 1
4-162-930-11 (1)
Data
Projector
Operating Instructions
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
VPL-EX130
© 2009 Sony Corporation
Inhaltszusammenfassung zur Seite Nr. 2
of fire or electric shock, refer servicing to qualified service personnel. WARNING WARNING: THIS WARNING IS To reduce the risk of fire or electric APPLICABLE FOR OTHER shock, do not expose this apparatus COUNTRIES. to rain or moisture. 1. Use the approved Power Cord (3-core mains lead) / Appliance Connector / Plug To avoid electrical shock, do not open with earthing-contacts that conforms to the cabinet. Refer servicing to the safety regulations of each country if qualified personnel
Inhaltszusammenfassung zur Seite Nr. 3
- Consult the dealer or an experienced radio/ For the customers in Europe TV technician for help. The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, You are cautioned that any changes or Tokyo, 108-0075 Japan. modifications not expressly approved in this The Authorized Representative for EMC manual could void your authority to operate and product safety is Sony Deutschland this equipment. GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service o
Inhaltszusammenfassung zur Seite Nr. 4
Table of Contents Precautions .........................................5 The INPUT SETTING Menu ...........30 Notes on Installation and Usage ........ 6 About the Preset Memory No. ....31 The SET SETTING Menu ................32 The MENU SETTING Menu ...........34 Overview The INSTALL SETTING Menu .......35 About the Supplied Manuals ..............9 The INFORMATION Menu .............37 Included Attachments ........................ 9 Location and Function of Controls .. 10 Maintenance Top/Right Si
Inhaltszusammenfassung zur Seite Nr. 5
Preventing internal heat build-up Precautions The unit is equipped with ventilation holes (intake) and ventilation holes (exhaust). Do not block or place anything near these holes, Safety or internal heat build-up may occur, causing � Check that the operating voltage of your picture degradation or damage to the unit is identical with the voltage of your projector. local power supply. If voltage adaptation is required, consult with qualified Sony Cleaning personnel. � Should any liquid o
Inhaltszusammenfassung zur Seite Nr. 6
� If you rub on the cabinet with a stained cloth, the cabinet may be scratched. Notes on Installation � If the cabinet is in contact with a rubber or vinyl resin product for a long period of and Usage time, the finish of the cabinet may deteriorate or the coating may come off. Unsuitable Installation LCD data projector Do not install the projector in the following This LCD data projector is manufactured situations. Installation is these situations using high-precision technology. You may,
Inhaltszusammenfassung zur Seite Nr. 7
Hot and humid Very dusty, extremely smoky locations � Avoid installing the unit in a location Avoid installing the unit in a very dusty or where the temperature or humidity is very extremely smoky environment. Otherwise, high, or the temperature is very low. the air filter will become obstructed, and this � To avoid moisture condensation, do not may cause a malfunction of the unit or install the unit in a location where the damage it. Dust preventing the air passing temperature may ris
Inhaltszusammenfassung zur Seite Nr. 8
Do not block the ventilation holes Usage at High Altitude When using the projector at an altitude of 1,500 m or higher, turn on “High Altitude Mode” in the INSTALL SETTING menu. Failing to set this mode when using the projector at high altitudes could have adverse effects, such as reducing the reliability of certain components. Avoid using a thick-piled carpet or anything Notes on Use that covers the ventilation holes (exhaust/ intake); otherwise, internal heat may build Note on carrying
Inhaltszusammenfassung zur Seite Nr. 9
Overview B Overview About the Supplied Included Manuals Attachments The following manuals are supplied with the The package for this product includes the projector. Main unit (projector) and the following attachments. Check them before use. Manuals Main unit (projector) (1) Quick Reference Manual (separately printed manual) This manual describes basic operations for projecting pictures after you have made the required connections. It also describes important precautions for safe handling
Inhaltszusammenfassung zur Seite Nr. 10
Location and Function of Controls Top/Right Side/Front 4 1 2 5 3 6 Rear/Bottom qa qs qd qf qg qh qj 78 9 0 10 Location and Function of Controls
Inhaltszusammenfassung zur Seite Nr. 11
Overview a Ventilation holes (exhaust) b Lens Remove the lens cover before projection. c Front remote control detector d Control panel For details, see “Control Panel” on Security bar page 12. e Zoom ring q Security lock Adjusts the picture size. Connects to an optional security cable (from Kensington). f Focus ring Web page address: Adjusts the picture focus. http://www.kensington.com/ g Ventilation holes (intake)/Air Note filter cover To maintain optimal performance, clean the air filter
Inhaltszusammenfassung zur Seite Nr. 12
Control Panel 123 45 6 a ?/1 (On/Standby) key about 90 seconds after the power is turned off. Turns on the projector when the – Lights in orange when the power projector is in standby mode. To turn off saving mode is on. the power, press the ?/1 key twice according to the message or hold the ?/1 For details, see page 21. key for about one second. Lights up or flashes under the following b INPUT key conditions: Selects an input signal. The input signal – Lights in red when the AC power co
Inhaltszusammenfassung zur Seite Nr. 13
Overview For details, see page 44. e MENU key Displays the on-screen menu. Press again to clear the menu. f PIC MUTING key Cuts off the picture. Press again to restore the picture. Location and Function of Controls 13
Inhaltszusammenfassung zur Seite Nr. 14
Connector Panel 13 2 456 a VIDEO IN connector Connects to the output connector of equipment using the supplied cable or an � S VIDEO (mini DIN 4-pin): optional cable. Connects to the S video output of video equipment. e OUTPUT connector � VIDEO (phono type): � MONITOR (HD D-sub 15-pin Connects to the video output of video female): equipment. Connects to the input connector of the � AUDIO (stereo minijack): monitor. Only the computer signal on To listen to sound output from video the curr
Inhaltszusammenfassung zur Seite Nr. 15
Overview k USB key Remote Commander This function is not provided in this projector. The keys that have the same names as those on the control panel function identically. l APA (Auto Pixel Alignment) key Automatically adjusts a picture to its 9 clearest while a signal is input from a 1 computer. 0 INPUT NETWORK USB For details, see “Smart APA” in “The 2 qa MENU APA SET SETTING Menu” on page 32. 3 qs m LENS key ENTER 4 This function is not provided in this projector. RESET qd 5 KEYSTONE AU
Inhaltszusammenfassung zur Seite Nr. 16
2 Install the lithium battery. Face the + side up. 3 Put the lithium battery holder back into the Remote Commander. Notes on the lithium battery � A button type lithium battery (CR2025) is used in the Remote Commander. Do not use batteries other than CR2025. � Keep the lithium battery out of the reach of children. � Should the battery be swallowed, immediately consult a doctor. Notes on Remote Commander operation � Make sure that nothing obstructs the infrared beam between the Remote Co
Inhaltszusammenfassung zur Seite Nr. 17
Projecting the Picture B Projecting the Picture Installing the Connecting the Projector Projector This unit can be operated on a floor or When you connect the projector, desktop (floor installation), but also can be make sure to: suspended from a ceiling with a dedicated � Turn off all equipment before making any mounting device (ceiling installation). connections. For details, see “Installation Diagram” on � Use the proper cables for each connection. page 51. � Insert the cable plugs firm
Inhaltszusammenfassung zur Seite Nr. 18
To connect a computer For details, refer to the operating instructions supplied with your computer. Rear side Note To connect a Macintosh computer equipped with a video output connector of a type having two rows of pins, use a commercially available plug adaptor. Connecting a VCR This section describes how to connect the projector to a VCR. For more information, refer to the instruction manuals of the equipment you are connecting. To connect to a video or S video output connector Rear
Inhaltszusammenfassung zur Seite Nr. 19
Projecting the Picture 2 Video cable (not supplied) or S-Video cable (not supplied) Projecting To connect to a video GBR/ Component output connector 1,2 4 7 Rear side to 1 to audio audio output (R) output (L) to video GBR/ component output Remote control 8 VCR detector 1 Signal Cable (not supplied) HD D-sub 15-pin (male) ↔ 3 × phono jack 2 Stereo audio connecting cable (not supplied) (Use a no-resistance cable.) 2 INPUT NETWORK USB 4 Notes MENU APA � For stereo audio connection, conn
Inhaltszusammenfassung zur Seite Nr. 20
The ?/1 key lights in red and the 5 Switch the equipment connected to projector goes into standby mode. output to the projector. Depending on the type of your 2 Press the ?/1 key. computer, for example a notebook, or an The ?/1 key lights after flashing in all-in-one LCD type, you may have to green. (The projector cannot be used switch the computer to output to the while the ?/1 key is flashing.) projector by pressing certain keys (e.g., VGA LCD , etc.), or by changing // , 3 Turn on the
