Bedienungsanleitung Sony PVM-136

Inhaltszusammenfassung zur Seite Nr. 1

BID SPECIFICATION
FOR
PRODUCTION CRT MONITORS





MODEL NUMBER
PVM-136




INSTRUCTIONS:
REMOVE THIS COVER PAGE AND ADD TO REQUESTS FOR QUOTATION AND
PROPOSALS. THE OBJECTIVE OF THIS BID SPECIFICATION IS TO ASSIST YOU IN
CLEARLY SPECIFYING THE SONY PRODUCT IDENTIFIED ABOVE, AND ENSURING
THAT THE BUYER IS WELL INFORMED OF THE HIGH STANDARD OF
PERFORMANCE THAT IS TO BE EXPECTED OF A SONY PRODUCT. THE
INFORMATION IN THIS DOCUMENT IS CURRENT AS OF JUNE 2002. PRODUCT
SPE

Inhaltszusammenfassung zur Seite Nr. 2

1.0 General Information The purpose of this information is to provide the specification for a product whose primary purpose is the reproduction of video and / or computer graphics information for one or more viewers. This reproduction of this information is to be accomplished via a direct-view CRT monitor. This document provides the minimum specifications for this device. The performance comparison of displays is not only technical in nature, but is also subjective to the user, when

Inhaltszusammenfassung zur Seite Nr. 3

4.0 User Interface / Controllability Information Control of this device shall be accomplished through the use of front panel controls that display on on-screen menus, available in a minimum of 5 languages. A status menu shall display current device settings. The following device functions shall be available for control: Power On / off Input Select Brightness / Contrast Video Decoder Functions Audio Volume Overscan / Underscan H/V Delay 4:3 / 16:9 Aspect Ratio Recall of the las

Inhaltszusammenfassung zur Seite Nr. 4

This device shall employ the use of a mode displaying horizontal and vertical intervals on the center of the screen. This device shall include the capability to switch between 4:3 and 16:9 aspect ratios. 6.0 Dimensional Information This device shall employ the use of a 14” diagonal (13” viewable) CRT. This device shall have maximum cabinet dimensions of 13.5 inches high by 13.63 inches wide and 13 inches deep. This device shall not weigh more than 25 pounds. 7.0 Connectivi

Inhaltszusammenfassung zur Seite Nr. 5

FCC Class A IC Class A CE EN55022 Class-B / EN50082 - 1 / EN60555 – 2 VCCI-I 10.0 Warranty Information This device shall carry a 1-year manufacturer’s warranty. Authorized servicing dealers of the devices’ manufacturer shall perform warranty service.