Inhaltszusammenfassung zur Seite Nr. 1
4-100-251-11 (1)
Trinitron Color TV
GB
Operating Instructions
• Before operating the unit, please read this manual thoroughly and
retain it for future reference.
KV-BT21
KV-BM21
M80
M70
© 2003 Sony Corporation
01GB01COV-MIX.p65 1 8/9/03, 3:32 PM
Sony KV-BT21M80 Group A23 (GB)_4-100-251-11 (1)
Black
Inhaltszusammenfassung zur Seite Nr. 2
WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. • To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid leaks from the batteries and touches your skin, immediat
Inhaltszusammenfassung zur Seite Nr. 3
Do not plug in too many appliances to the same To prevent fire or shock hazard, do not expose the power socket. Do not damage the power cord. TV to rain or moisture. Pull the power cord out by the plug. Do not pull the power cord itself. Even if your TV is turned Install the TV on a stable TV stand and floor which off, it is still connected to the AC power source can support the TV set weight. Ensure that the TV (mains) as long as the power cord is plugged in. stand surface is flat and its ar
Inhaltszusammenfassung zur Seite Nr. 4
x Securing the TV To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. 20 mm 3.8 mm screws clamps band Screw the band to the TV stand and to the provided hole at the rear of your TV. or (1) Put a cord or chain through the clamps. (2) Screw one clamp to a wall or pillar and the other clamp to the provided hole at the rear of your TV. Note • Use only the supplied screws. Use of other screws may damage the TV. 4 01GB02WAR-MIX.p65 4 9/9/03, 2:14
Inhaltszusammenfassung zur Seite Nr. 5
Table of Contents Additional Information Installation Getting Started ..................................... 6 Connecting optional components ... 20 Setting up your TV Troubleshooting ................................. 21 (“Initial Setup”) .................................... 7 Specifications ...................... Back cover Overview of Controls TV top control, front and rear panels............................................. 8 Using the remote control and basic functions .......................
Inhaltszusammenfassung zur Seite Nr. 6
b b Installation x Getting Started 1 Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. Tip • You can also connect your TV to other optional components (see page 20). Step 3 Plug in the power cord, then press ! on the TV to turn it on. Note • The 1 (standby) indicator flashes green for a few seconds when turning on the TV. This does not
Inhaltszusammenfassung zur Seite Nr. 7
Installation x Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Initial Setup” menu will appear. You may change the menu language and preset the TV channels automatically using the buttons on the top control panel. Tip • The MENU, and V/v/B/b buttons on the remote control can also be used for the operations below. Press 2 +/– to select the desired menu 1 language, then press t. The selected menu language appears. Press 2 +/– to select “Yes”, then press t 2
Inhaltszusammenfassung zur Seite Nr. 8
2 Overview of Controls x TV top control, front and rear panels TV top control panel MENU PROG 9 8 76 TV rear panel KV-BT21M80 KV-BM21M70 1 1 (MONO) (MONO) (MONO) L L R R (MONO) 00 TV front panel qa qa qs qs KV-BT21M80 KV-BM21M70 2 2 L (MONO) R (MONO) (MONO) 5 32 5 32 1 4 1 4 Button/Terminal Function Page 1 ! Turn off or turn on the TV. 6 2 Remote control sensor. – 3 Wake Up indicator. 16 3 1 Standby indicator. 6 4 i Headphone jack. – 4 Earphone jack. – 5 t2 Video input terminal 2. 20 6 PROG +/–
Inhaltszusammenfassung zur Seite Nr. 9
Overview of Controls x Using the remote control and basic functions 9 1 0 A/B qa 2 qs 1 2 3 4 5 6 qd 7 8 9 0 3 PROG qf 4 5 qg MENU qh 6 qj 7 qk 8 ql TV Button Description Page 1 ?/1 Turn off temporarily or turn on the TV. – 2 a Display the TV program. – 3 Jump to previous program number. – 4 PROG +/– Select program number. – 5 2 +/– Adjust volume. – 8 Not function for your TV. – 9 Mute the sound. – 0 Display on-screen information. – qs t Select TV or video input. 20 qd 0 – 9, ÷ Input numbers. –
Inhaltszusammenfassung zur Seite Nr. 10
continued Button Description Page qk Select sound mode options: – (KV-BT21M80 only) “Dynamic” (low and high tones), “Drama” (voice and high tones), “Soft” (soft, natural and relaxing sound), “Personal”*. * When the “Personal” mode is selected, you can receive the last adjusted sound settings from the “Sound Adjustment” option in the menu (see page 15). ql Select picture mode options: – “Dynamic” (high contrast), “Standard” (normal contrast), “Soft” (mild), “Personal”*. * When the “Personal” mode
Inhaltszusammenfassung zur Seite Nr. 11
Menu Adjustment x Introducing the menu system The MENU button lets you open a menu and change the settings of your TV. The following is an overview of the menu system. Return icon Picture icon Name of the current Setup Sound icon menu Language: English Timer icon Video Label Menu level 3 Color System: Channel Setup icon Setup icon Menu level 2 Menu level 1 Select Confirm End User Guidance Level 1 Level 2 Level 3/Function Page “Mode” 14 “Picture” Select the picture mode: “Dynamic” t “Standard” t
Inhaltszusammenfassung zur Seite Nr. 12
continued Level 1 Level 2 Level 3/Function Page 16 “Timer” “Sleep Timer” Set TV to turn off automatically. “Wake Up Timer” Set TV to turn on automatically. “Channel Setup” “Auto Program” Preset channels automatically. 17 Preset channels manually. “Manual Program” Select the TV system: “TV System” “B/G” t “ I” t “D/K” t “M” Label the program number. “Program Label” “Program Block” Block unwanted programs. “Setup” “Language” Change the menu language: 19 “English” t “ ”(Arabic) “Video Label” Label
Inhaltszusammenfassung zur Seite Nr. 13
How to use the menu 0 PROG Picture Press MENU to Mode: Dynamic Picture Adjustment MENU display the menu. Color Temperature: Cool Intelligent Picture: On Select Confirm End Press V or v to select the desired item. Channel Setup TV Auto Program Manual Program TV System: B/G Program Label Program Block Select Confirm End Press (or b) to Channel Setup confirm your Auto Program Manual Program selection and TV System: B/G go to the next Program Label Program Block level. Select Confirm End Other menu
Inhaltszusammenfassung zur Seite Nr. 14
x Changing the “Picture” setting The “Picture” menu allows you to adjust the picture settings. Press MENU. 1 Make sure the “Picture” icon ( ) is Picture 2 Mode: Dynamic selected, then press . Picture Adjustment Color Temperature: Cool Intelligent Picture: On Select Confirm End Press V or v to select the desired item (e.g., “Mode”), then press . 3 Select To “Mode” choose either “Dynamic”, “Standard”, “Soft” or “Personal”* (see page 10). “Color Temperature” adjust white color tint. Choose either “
Inhaltszusammenfassung zur Seite Nr. 15
x Changing the “Sound” setting The “Sound” menu allows you to adjust the sound settings. Press MENU. 1 Sound Press V or v to select the “Sound” 2 Mode: Dynamic icon ( ), then press . Sound Adjustment Balance Intelligent Volume: Off Surround: Off Select Confirm End Press V or v to select the desired item (e.g., “Mode”), then press . 2 Select To “Mode” choose either “Dynamic”, “Drama”, “Soft” or (KV-BT21M80 only) “Personal”* (see page 10). “Balance” Press v or B to emphasize the left speaker. (KV-
Inhaltszusammenfassung zur Seite Nr. 16
x Changing the “Timer” setting The “Timer” menu allows you to set TV to turn off and turn on automatically. Press MENU. 1 Press V or v to select the “Timer” icon ( ), Timer 2 Sleep Timer: Off then press . Wake Up Timer: Off Select Confirm End Press V or v to select the desired item (e.g., “Sleep Timer”), then press . 3 Select To “Sleep Timer” set TV to turn off automatically. Press V or v to select the desired period of time (max. of 1 hour and 30 minutes), then press . “Wake Up Timer” set TV to
Inhaltszusammenfassung zur Seite Nr. 17
x Changing the “Channel Setup” setting The “Channel Setup” menu allows you to preset channels automatically, manually preset channels, select the TV system, label the program number and block unwanted programs. Press MENU. 1 Press V or v to select the “Channel Setup” Channel Setup 2 Auto Program icon ( ), then press . Manual Program B/G TV System: Program Label Program Block Select Confirm End Press V or v to select the desired item (e.g., “Auto Program”), then press . 3 Select To “Auto Program”
Inhaltszusammenfassung zur Seite Nr. 18
continued Presetting channels manually After selecting “Manual Program”, select the program 1 number to which you want to preset a channel. Manual Program Program: 01 (1) Make sure “Program” is selected, then press . TV System: B/G VHF Low Fine: Auto (2) Press V or v until the program number you want Skip: Off to preset appears on the menu, then press . Select Confirm End Select the desired channel. 2 (1) Make sure either “VHF Low”, “VHF High” or “UHF” is selected, then press . (2) Press V or v
Inhaltszusammenfassung zur Seite Nr. 19
x Changing the “Setup” setting The “Setup” menu allows you to change the menu language, label the connected equipment and select the color system. Press MENU. 1 Press V or v to select the “Setup” icon Setup 2 Language: English ( ), then press . Video Label Color System: Auto Select Confirm End Press V or v to select the desired item (e.g., “Language”), then press . 3 Select To “Language” change the menu language. Press V or v to select either “English” or “ ”(Arabic), then press . “Video Label”
Inhaltszusammenfassung zur Seite Nr. 20
Additional Information x Connecting optional components Connecting to the video input terminal ( t ) TV front panel KV-BT21M80 KV-BM21M70* Audio/Video 2 2 cable (not supplied) L(MONO)– –R (MONO)– –(MONO) Camcorder TV rear panel Video game KV-BM21M70* KV-BT21M80 equipment Antenna cable 1 1 (not supplied) Audio/Video (MONO) (MONO) L cable (not supplied) (MONO) R VCR * Sound Mix Terminal (KV-BM21M70 only) You can connect the audio L and R jacks from your AV equipment to both (MONO) jacks on the TV
