Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
Introduction The Uniden 900MHz cordless phones are designed and engineered to exacting standards for reliability, long life, and outstanding performance. NOTE: Some illustrations in this manual may differ from the actual unit for explanation purposes. The color of your cordless phone may vary. • 900MHz Extended Range • 10-Number Memory • Last Number Redial Technology Dialing • Find Handset Locator • Pulse/Tone Dialing • Earpiece Volume Control • Hearing Aid Compatible ® • One Touch RocketDial •
Inhaltszusammenfassung zur Seite Nr. 3
Included with Your Phone • Base • Handset • AC Adapter • Telephone Cord • Rechargeable Battery Replacement adapters, batteries and other parts may be purchased on Uniden’s website www.uniden.com, or be contacting Uniden’s Parts Department (see page 3). Setting up the Phone Do the following steps: A. Choose the best location C. Connect the base unit B. Install the rechargeable battery pack into the handset D. Choose the dialing mode A. Choose the best location Before choosing a location for your
Inhaltszusammenfassung zur Seite Nr. 4
find hs 4) Place the handset in the base with the keypad facing forward. NOTE: For optimum performance use only the Uniden Battery (BT-904) supplied with your phone. Replacement batteries are also available through the Uniden Parts Department at (800) 554-3988, Monday through Friday from 8:00 a.m. to 5:00 p.m. or online at www.uniden.com Low Battery Alert When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phon
Inhaltszusammenfassung zur Seite Nr. 5
4) Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and a telephone outlet. TIP: If your telephone outlet isn’t modular, contact your telephone company for assistance. Modular D. Choose the dialing mode Most phone systems use tone dialing which sends DTMF tones through the phone lines. However some phone systems still use pulse dialing such as in rural areas. The default setting is tone dialing. Depending on your dialing system, set the mode as
Inhaltszusammenfassung zur Seite Nr. 6
Terminology Throughout this manual, terms such as Standby and Talk Mode are used. Below is the terminology explanation. • Talk Mode - The handset is off the base and the talk key has been pressed, enabling a dial tone. • Standby Mode - The handset may be sitting in or off the base, but is NOT in use. The talk key has not been pressed and there is no dial tone. Adjusting the Ringer and Earpiece Volume Ringer tone When the phone is in standby mode, press the v/ /vol key repeatedly to listen to the
Inhaltszusammenfassung zur Seite Nr. 7
Find Handset To locate the handset (while it’s off the base), press the find hs key on the base. The handset beeps for 60 seconds. Paging is canceled when pressing any handset key, the find hs key on the base or the handset is returned to the base. NOTE: Paging is also canceled when the phone receives an incoming call. Flash and Call Waiting If you have “Call waiting” service and a call waiting tone sounds while you are on a call, press the flash key to accept the waiting call. There is a short
Inhaltszusammenfassung zur Seite Nr. 8
One-touch RocketDial Your phone is equipped with “One-touch RocketDial” for instant dialing. It is used to dial the phone number stored in the one-touch RocketDial location (See “Storing a Phone Number in Memory Dial”). To instantly dial the phone number stored in the one-touch RocketDial location, simply press the RocketDial key in standby mode. (There is no need to press the talk key. The phone will automatically dial). If you press the RocketDial key and a phone number is not stored in the o
Inhaltszusammenfassung zur Seite Nr. 9
Troubleshooting If your cordless telephone is not performing to your expectations, please try these simple steps. NOTE: Do not attempt to service this unit yourself. Servicing must be performed by qualified personnel. Symptom Suggestion The charge/in use LED won’t • Make sure the AC adapter is plugged into the base and a wall outlet. illuminate when the handset • Make sure the handset is properly seated in the base. is placed in the base. • Make sure that the charging contacts on the handset are
Inhaltszusammenfassung zur Seite Nr. 10
on it. Precautions! 9. Do not overload wall outlets and extension cords, as this can Before you read anything else, please observe the following: result in the risk of fire or electrical shock. 10.Never push objects of any kind into this product through Warning! Uniden America Corporation DOES NOT represent this unit to be cabinet slots, as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric waterproof. To reduce the risk of fire, electrical
Inhaltszusammenfassung zur Seite Nr. 11
operate at a maximum distance with the qualification that the about the proper adapter or converter for your particular situation. range depends upon the environment in which the telephone is Connecting the Telephone Cords used. Many factors limit range, and it would be impossible to include all the variables in our rating. The Maximum Range rating Consider these safety guidelines before connecting the telephone of this phone is meant to be used as a means of comparison cords: against other rang
Inhaltszusammenfassung zur Seite Nr. 12
One Year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below. WARRANTY DURATION: This warranty to the original user shall terminate and be of no further effect 12 months after the date of original re
