Inhaltszusammenfassung zur Seite Nr. 1
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 1
User Manual (Part 2)
5.8 GHz Cordless
Telephone
E5600/E5603B
with Caller ID & Call Waiting
Inhaltszusammenfassung zur Seite Nr. 2
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 2 You must install and See page 8 charge battery before STOP! for easy instructions. using the telephone. For customer service or product Please also read information, visit our web site at Important Product Information www.telephones.att.com Enclosed in product package. or call 1-800-222-3111. Add new handsets to make your phone more versatile (see page 24) Your telephone can accommodate up to four cordless handsets. You can
Inhaltszusammenfassung zur Seite Nr. 3
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 1 User Manual (Part 2) 5.8 GHz Cordless Telephone E5600/E5603B with Caller ID & Call Waiting Table of contents Getting Started Caller ID Logs Quick reference guide ........................2 How Caller ID works .......................21 Parts checklist.......................................4 To review your call log.....................22 Before you begin ..................................6 Telephone base installation..........
Inhaltszusammenfassung zur Seite Nr. 4
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 2 Getting Started Quick reference guide Handset Select/Menu V CID Press to display menu, or to select Press to scroll down in menus. highlighted item from menu. Press when phone is not in use to display Caller ID information (see page 22). While entering names, press to move the cursor ^ PHONE BOOK to the left. Press to scroll up in menus. Press when phone is not in use to display phone book entries (see page 17). While ente
Inhaltszusammenfassung zur Seite Nr. 5
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 3 Getting Started Quick reference guide Telephone Base Handset Locator Press to locate handset if lost (see page 11). Message Waiting In Use Charging Flashes when you have new voice On when handset is in use. Flashes On when handset battery is mail (requires voice mail service from when another phone is in use on the charging. your local telephone company). same line. 3
Inhaltszusammenfassung zur Seite Nr. 6
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 4 Getting Started Parts checklist for E5600 Remember to save your sales receipt and original packaging in case you ever need to ship your telephone for warranty service. Check to make sure the telephone package includes the following: Telephone base Telephone handset Power adapter Battery Belt clip Telephone line cord Wall mount bracket 4 4
Inhaltszusammenfassung zur Seite Nr. 7
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 5 Getting Started Parts checklist for E5603B Remember to save your sales receipt and original packaging in case you ever need to ship your telephone for warranty service. Check to make sure the telephone package includes the following: Telephone base Telephone handsets CHARGING CHARGING Handset chargers Power adapters Batteries Wall mount bracket Telephone line cord Belt clips 5
Inhaltszusammenfassung zur Seite Nr. 8
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 6 Getting Started Before you begin About Caller Identification Telephone operating range Caller ID with Call Waiting features in This cordless telephone operates with this telephone let you see who’s calling the maximum power allowed by the before you answer the phone, even Federal Communications Commission when you’re on another call. These (FCC). Even so, this handset and base features require services provided by can commu
Inhaltszusammenfassung zur Seite Nr. 9
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 7 Getting Started Telephone base installation Install the telephone base as shown below. Choose a base location away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. Plug power cord Plug telephone transformer into line cord into electrical outlet. telephone jack. NOTE: Use only the power cord supplied with this product. If you need a re
Inhaltszusammenfassung zur Seite Nr. 10
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 8 Getting Started Battery installation & charging After battery installation, place the handset in the base unit and allow to charge for 15 hours before use. You can keep the batteries charged by returning the handsets to their base unit or charger after each use. When the battery is fully depleted, a recharge takes about 12 hours. Average talk time on a fully charged battery is about eight hours depending on environmental co
Inhaltszusammenfassung zur Seite Nr. 11
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 9 Appendix Wall mounting The base can be installed on any standard wall-phone outlet as shown below. Choose a location away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. Install the line cord as shown in the diagram. Connect cords as shown on page 7, then press and slide down firmly so base is held securely on outlet mounting pegs. Plug
Inhaltszusammenfassung zur Seite Nr. 12
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 10 Appendix Belt clip & optional headset Install belt clip as shown below if desired. For hands-free telephone conversations, you can use any industry standard 2.5 mm headset (purchased separately). For best results use an AT&T 2.5 mm headset. Snap belt clip into notches on side of handset. Rotate and pull to remove. Plug 2.5 mm headset into jack on side of handset (beneath small rubber cap) 10
Inhaltszusammenfassung zur Seite Nr. 13
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 11 Telephone Operation Elapsed time Basic operation Making and answering calls PHONE 00:00:12 To answer an incoming call, press PHONE (or SPEAKER, or any dial pad key). To make a call, press PHONE or SPEAKER, then dial a number. Press OFF to hang up. To preview numbers before dialing, enter numbers first, then press PHONE or SPEAKER to dial. Press DELETE or CLEAR at any time to make corrections as you are entering numbers. T
Inhaltszusammenfassung zur Seite Nr. 14
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 12 Telephone Operation Options while on calls Volume control Press the VOLUME buttons on the side of the handset Volume to adjust listening volume. Each button press raises or lowers volume by one level. When you change the volume level, the new setting becomes the default. The new volume level will be Flash applied each time you use the handset, speakerphone or headset. Call waiting If you have Call Waiting service, you will
Inhaltszusammenfassung zur Seite Nr. 15
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 13 Telephone Operation Intercom calls Intercom calls Use the intercom feature to have conversations between the handsets. If you have added additional handsets, see page 24 to register the handsets. Press the INTERCOM button on a handset to initiate an intercom call. Then after entering the number of the handset you wish to intercom with, your handset will call the other handset. Press PHONE, INTERCOM, SPEAKER, or any dial pa
Inhaltszusammenfassung zur Seite Nr. 16
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 14 Telephone Operation Call transfer Call transfer If you have added additional handsets (see page 24), you can transfer an external call from one handset to another handset. • The first handset (HS1) can forward an external call to another handset (HS2, HS3, or HS4) by pressing the INTERCOM key. The first handset (HS1) will display “ENTER HANDSET #.”After entering the handset number to which you want to transfer the call, H
Inhaltszusammenfassung zur Seite Nr. 17
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 15 Telephone Operation Highlighted menu item Handset settings At the feature menu you can change settings to > PHONE BOOK customize how the telephone works. CALL LOG Press MENU, then use the ^V buttons to scroll to the feature you want to change. As you scroll through the menu, the top menu item is always highlighted with a > symbol. Press SELECT to select the highlighted item. Press OFF at any time to cancel an operation,
Inhaltszusammenfassung zur Seite Nr. 18
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 16 Telephone Operation Handset settings Language LANGUAGE At this menu you can select the language used in all ENGLISH menus and screen displays. Use the ^V buttons to select English, Spanish or French, then press SELECT to save your preference. Clear Message Waiting Indicator >PHONEBOOK CALL LOG If you subscribe to voice mail services provided by your local telephone company, you will receive a text message on the handset w
Inhaltszusammenfassung zur Seite Nr. 19
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 17 Phonebook Phone book Memory capacity The phone book directory can store up to 50 entries. Pat Williams 555-1234 Each entry can contain a number up to 32 digits, and a name up to 16 letters long. A convenient search feature can help you find and dial numbers quickly (see page 19). Timeouts and error messages If you pause for too long while making an entry, the procedure will time out and you will have to begin again. If all
Inhaltszusammenfassung zur Seite Nr. 20
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 18 Phonebook AT&T New phone book entries To create a new phone book entry Press MENU twice to select DIRECTORY. Press V to highlight STORE. Press SELECT, then enter the telephone number when prompted. > PHONE BOOK CALL LOG Use the dial pad to enter up to 32 digits, then press SELECT. You will be notified if the number is already in your phone book. To insert a number from your redial list, press REDIAL, then ^V to find the
