Inhaltszusammenfassung zur Seite Nr. 1
XS1415/1415+1
Owner’s Manual
XS1415+1 OM.indd 1 21/5/08 10:29:31 AM
Inhaltszusammenfassung zur Seite Nr. 2
Contents Selecting the Ring Tone and Volume ................................ 26 Welcome..........................................................................2 Adjusting the Earpiece Volume ......................................... 26 Terminology/Manual.Conventions................................3 Using Call Waiting ............................................................. 27 Product.Overview...........................................................4 Selecting a Different Channel .......
Inhaltszusammenfassung zur Seite Nr. 3
Welcome Congratulations on your purchase of the Uniden single handset (XS45) or dual handset (XS45+ ) cordless telephone. This phone is designed and engineered to exacting standards for reliability, long life, and outstanding performance. Note: Illustrations in this manual may differ from the actual unit for explanation purposes. The color of your cordless phone may vary. 2 XS1415+1 OM.indd 2 21/5/08 10:29:31 AM
Inhaltszusammenfassung zur Seite Nr. 4
Terminology Base The main part of the phone that connects to your phone line and lets you make and receive calls. Charger A cradle that charges the handset battery. It connects to power but does not connect to a phone line. Caller ID is available from your telephone provider. With this service, you can see the name and number CID of incoming callers. Caller ID on Call Waiting is available from your telephone provider. With this service, you can see CIDCW incoming caller information while on an
Inhaltszusammenfassung zur Seite Nr. 5
Product.Overview Main.Phone.Features • Dual Handset System (Extra Handset & Charger Included - XS45+ only) • Call Transfer from Handset to Handset (XS45+ only) • Caller ID* • Caller ID on Call Waiting* • 3-Line Backlit LCD • 30 Caller ID Memory • 0 Number Memory Dialing • Last Number Redial • Voice Mail Waiting Indicator • Tone Dialing • Find Handset Key • Earpiece/Ringer Volume Controls • Mute or Turn Ringer Off • Hearing Aid Compatible • 20 Channel Auto Scan • Desk or Wall Mountable *
Inhaltszusammenfassung zur Seite Nr. 6
Controls.and.Functions XS1415+1.Handset XS1415.Handset . Handset antenna 11 2. Handset battery compartment 3. Handset earpiece 14 4. LCD display 33 9 5. [vol/ / / ] (volume & ringer up/down) key 6. [cid/menu] key 44 7. [ /tone/ ] (left cursor) key 8. [redial/pause] key 55 9. [select/channel] key 10 10 (XS45+) 66 11 11 [select] key (XS4 5) 12 12 0. [memory] key . [end] key 2. [talk/flash] key 22 3. [#/ ] (right cursor) key 77 13 13 4. [delete/transfer] key 88 14
Inhaltszusammenfassung zur Seite Nr. 7
8. in.use/ (in use/charge) LED / Voice mail waiting Main.Base.Unit indicator (flashing) 21 21 22 22 9. [find] key 20. Base charging contacts 2. Base DC.IN.9V jack 22. TEL.LINE jack 18 18 19 19 20 20 Extra.Charging.Cradle.(XS1415+1.only) 23. Charging contacts 24. (charge) LED 25. Charging cradle DC.IN.9V jack 25 23 24 6 XS1415+1 OM.indd 6 21/5/08 10:32:18 AM
Inhaltszusammenfassung zur Seite Nr. 8
Installing.the.Phone Choosing.the.Best.Location When choosing a location for your new phone, here are some important guidelines you should consider: PLACE YOUR BASE TRY TO AVOID • Microwave ovens • Fluorescent • Other cordless • Refrigerators lighting telephones Near an AC outlet and a telephone wall jack. • • Personal computers Personal computers • • Areas with Areas with • • W Wireless LAN ireless LAN a lot of a lot of equipment equipment background background • • TVs TVs noise noise •
Inhaltszusammenfassung zur Seite Nr. 9
Installing.the.Rechargeable.Battery.Packs.into.the.Handsets Each handset is powered by a rechargeable battery pack. Once installed, the battery charges automatically when the handset is placed in the base or charging cradle (XS45+ only). To install the rechargeable battery pack: 1) Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove. 2) Plug the battery pack connector (red & black wires) into the small jack insi
Inhaltszusammenfassung zur Seite Nr. 10
Installing.the.Base.Unit.and.Charging.Cradle.(XS1415+1.only).. ) Connect each AC adapter to the DC.IN.9V jack and to each Route the cor Route the cord. d. standard 240V AC wall outlet. Note:. •..Use.only.the.supplied.PS-S0921YL3.AC.adapter. for.the.base.unit.and.AAD-600S(M).for.the. charging.cradle.(XS1415+1.only)...Do.not.use.any. other.AC.adapter. •..Do.not.place.the.power.cord.where.it.creates.a. trip.hazard.or.where.it.could.become.chafed.and. create a fire or electrical hazard. 2) Charge
Inhaltszusammenfassung zur Seite Nr. 11
3) Make sure that the in.use/ LED and LED (XS45+ only) illuminate. If the LED does not illuminate, check to see that the AC adapter is plugged in and that the handset makes good contact with the cradle’s charging contacts. Note:. •. Connect.the.AC.adapter.to.a.continuous.power.supply •..Place.each.cradle.close.to.the.AC.outlet.to.avoid.long.extension. cords. •. Charge.your.handsets.at.least.15.-.20.hours.before. . plugging.into.the.phone.line.. 4) Once the handset battery packs are fully
Inhaltszusammenfassung zur Seite Nr. 12
Mounting.the.Base.Unit.on.a.Wall Standard.wall.plate.mounting This phone can be mounted on any standard wall plate. ) Plug the AC adapter to the DC.IN.9V jack. 2) Plug the AC adapter into a standard 240V.AC wall outlet. 3) Plug the telephone cord into the TEL.LINE jack. 4) Route the telephone cord through the groove as shown. 5) Plug the telephone cord into the telephone outlet. 6) Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone
Inhaltszusammenfassung zur Seite Nr. 13
Direct.wall.mounting If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before 3mm 3mm doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Try to mount your phone within .5m of a working phone jack to avoid excessive cord lengths. 100m 100mm m • Make sure the wall material is capable of supporting the weight of the base and handset
Inhaltszusammenfassung zur Seite Nr. 14
Register.Handsets.to.the.Main.Base.before.Using!.(XS1415+1.only) Both handsets will need to be registered to the main base unit before use. Whichever handset you choose to charge in the base unit will automatically register to the base unit. The handset charging in the extra charging cradle MUST also be registered to the base unit before use. To register the extra handset: ) Be sure both handsets are fully charged. 2) Pick up the handset from the charging cradle, and place it in the base un
Inhaltszusammenfassung zur Seite Nr. 15
When.to.Re-register.Handsets.(XS1415+1.only) In some cases, it may be necessary to re-register your handsets. To re-register your handsets, please follow registration steps outlined on page 3. Re-registration is required in the following scenarios: ) You’ll need to re-register both handsets (follow steps on page 3) each time the digital security code is changed. (Refer to page 32 for details regarding the Digital Security Code.) 2) When there is a power failure for more than one hour: If
Inhaltszusammenfassung zur Seite Nr. 16
Basic.Setup There are four basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting), Name Tag and Insert 0. CIDCW option can only be set by using Handset . If you try to set by using Handset 2, you will not see these options listed on the LCD screen. (Handset shows in the display while the Handset No. phone is charging XS45+ only). AutoTalk, Name Tag and Insert 0 options can be set by using either Handset or Handset 2 (XS4 5+ only). Activating.Auto
Inhaltszusammenfassung zur Seite Nr. 17
Activating.Caller.ID.on.Call.Waiting.(Handset.No.1.only) Caller ID allows you to see the name and number of the calling party before you answer the phone. Caller ID on Call Waiting (CIDCW) lets you see the name and number of a call that comes in when you are on the line. You must subscribe to Caller ID service through your local telephone provider to use this feature. ) When the phone is in standby, press and hold [cid/menu]. The following screen appears. 2) Press [vol/ / ] to move the pointe
Inhaltszusammenfassung zur Seite Nr. 18
Setting.Insert.0 This feature adds '0' or '00' to the number, when you receive Caller ID messages. The default setting for New Zealand is On. The default setting for Australia is Off. ) When the phone is in standby mode, press and hold the [cid/menu]. The following screen appears. 2) Press the [vol/ / ].key three times to select INSERT 0. 3) Press the [select] key (XS45) or the [select/channel] key (XS4 5+) to toggle and turn Insert 0 ON or OFF. 4) Press [end] key or return the han
Inhaltszusammenfassung zur Seite Nr. 19
Using.the.Speed.Dial.Memory Your cordless phone allows you to store up to 0 names and numbers in each handset. You can dial these numbers with just a few key presses. The speed dial memory is not limited to phone numbers. You can store any number (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing. An example is a frequently refilled prescription number. Store your pharmacy phone number in one speed dial and your most frequently refilled p
Inhaltszusammenfassung zur Seite Nr. 20
Storing.a.Name.and.Number.in.Memory ) With the phone in standby, press [memory]. 2) Enter [0] - [9] or use [vol/ / ] and [vol/ / ] to select the speed dial location where you would like to store this entry, and then press [select/channel] (XS45+) or [select] (XS4 5) twice. 3) STORE NAME appears and a cursor flashes indicating that the phone is ready for the name to be entered. Note:.If.the.selected.speed.dial.number.is.already.assigned,.the.Edit.screen. appears..You.can.select.EDIT.MEM
