Bedienungsanleitung Viking Telephone K-1900D-2

Inhaltszusammenfassung zur Seite Nr. 1

K-1900 Series
K-1900 Series
TECHNICAL
TECHNICAL
Hot Line Phones
Practice
Practice
June 27, 2002
TELECOM SOLUTIONS FOR THE 21ST CENTURY
TELECOM SOLUTIONS FOR THE 21ST CENTURY
Economical and Vandal Resistant
Hot-Line Phones
The K-1900 Series of Hot-Line phones are pro-
grammable to dial a 1-20 digit telephone number
each time the phone’s handset is lifted. The prod-
K-1900-6
ucts may be programmed to Touch Tone
K-1900D-2 ASH
or pulse dial and will not dial on incoming
calls.
K-1900-7
The K-1900

Inhaltszusammenfassung zur Seite Nr. 2

Specifications and Installation Specifications and Installation Viking offers three variations of hot-line phones and one network dialer. Below are model numbers and descriptions of the Hot Line phones Viking offers. Each model is designed for specific applications, including varying mounting capabilities and levels of vandal protection. The following sections describe the product model numbers, their applications, installation and specifications. Important: Use a minimum wire gauge of 26 whe

Inhaltszusammenfassung zur Seite Nr. 3

Programming Programming While in the programming mode, two beeps indicate a valid programming entry. An invalid entry will be indicated with three beeps. To exit programming, simply hang-up the K-1900 Series phone. A. Accessing the Programming Mode 1. Using the Security Code Step 1. Connect the K-1900 Series device to an analog C.O. line, or an analog PABX/KSU station. Step 2. From a Touch Tone phone, call into the K-1900 Series phone. Step 3. Listen for at least one ringback in the calling p

Inhaltszusammenfassung zur Seite Nr. 4

E. Security Code A six digit security code is required to access the programming mode. The factory set security code is 845464 (V-I-K- I-N-G). It is recommended that you change the security code to a personal 6 digit (0-9) number in memory position #9 while in the programming mode. Note: The security code must be six digits in length and cannot contain a ✱ or #. F. Touch Tone or Pulse Dialing The K-1900 Series phones are factory set to automatically dial using Touch Tones. A✱6 entered in the