Inhaltszusammenfassung zur Seite Nr. 1
Color profile: Disabled
Composite Default screen
H:...folded xc800series.vp
Thu Jul 09 15:07:18 1998
Inhaltszusammenfassung zur Seite Nr. 2
Color profile: Disabled Composite Default screen Contents Introduction.............................2 Setting the Pulse/Tone Switch ............8 Features ............................2 Adjusting Ringer Controls ...............8 Adjusting Handset Receiver Volume........8 Included with the XC800 Series Phone .........3 Automatic Digital Code Security...........8 Controls and Functions.....................4 Using Your Phone ........................9 Installation..............................5 Makin
Inhaltszusammenfassung zur Seite Nr. 3
Color profile: Disabled Composite Default screen Included with the XC800 Series Phone If any of these items are missing or damaged, contact Uniden Parts Department at: (800) 554-3988, 8:00 am to 5:00 p.m. Central, Monday through Friday. Handset Base Rechargeable Battery AC Adapter Short Telephone Cord Long Telephone Cord • Precautions and Important Safety Instructions • This Owner’s Manual 3 H:...folded xc800series.vp Thu Jul 09 15:07:24 1998
Inhaltszusammenfassung zur Seite Nr. 4
Color profile: Disabled Composite Default screen Controls and Functions 1. Talk ButtonT 2. Numeric Keypad 3. Tone Key 4. Memory KeyM 5. Ringer and Earpiece VolumeV and Ringer KeyG 6. Talk/Batt Low Indicator 7. Flash/Redial Keyr 8. Channel Select KeyC 9. Pause P 10. Tone Pulse switch 11. Telephone Jack In 12. AC Adapter Jack In 13. Status (in use) Indicator 14. Page/Find Key 11 11 11 11 10 10 10 10 12 12 12 12 status status status status 13 13 13 13 pa pa pa pag g g ge/find e/find e/find e/find
Inhaltszusammenfassung zur Seite Nr. 5
Color profile: Disabled Composite Default screen Installation Selecting a Location Wall Installation Before choosing a location for your new phone, Standard Wall Plate Mounting read the “Installation Considerations” included in the “Precautions and Important Safety These phones are designed to be mounted on a Instructions” brochure. standard AT&T or GTE wall plate. 1. Plug the AC adapter into the base. Applying Power to the Base All the XC800 Series phones require the included AC adapter and an
Inhaltszusammenfassung zur Seite Nr. 6
Color profile: Disabled Composite Default screen 5. Place the cord inside the • Select a location away from electrical cables, molded channel on the pipes, or other items behind the mounting bottom of the base. location that could cause a hazard when inserting screws into the wall. • Make sure the wall material is capable of supporting the weight of the base and handset. • Use #10 screws with anchoring devices suitable for the wall material where the base will be placed. 1. Insert two mounting
Inhaltszusammenfassung zur Seite Nr. 7
Color profile: Disabled Composite Default screen Setting Up Your Phone Extending the Antenna Cleaning the Battery Contacts Before using your phone, be sure to raise its To maintain a good antenna to the vertical position. charge, it is important Then, fully extend the antenna. to clean all charging contacts on the handset and base Installing the Handset Battery Pack about once a month. Use a pencil eraser or 1. Press in on the battery other contact cleaner. cover release. Do not use any liquids
Inhaltszusammenfassung zur Seite Nr. 8
Color profile: Disabled Composite Default screen Note: Most phone systems are tone dialing. Check To Avoid this Memory Effect with your local phone company if you are not At least once a month, operate the unit until the sure whether your system is tone or pulse dialing. “Battery Low” indicator appears. Then recharge the battery for a full 15 - 20 hours. Avoid putting the handset back in the base after using the phone Adjusting Ringer Controls for a short time. This could cause “topping off” To
Inhaltszusammenfassung zur Seite Nr. 9
Color profile: Disabled Composite Default screen Using Your Phone Making and Receiving Calls Changing Channels, Flash, and Page/Find The following features of the XC800 Series phones are different depending on the handset’s To change channels or access call waiting while location when you make or receive a call. the phone is in use, or to use the one-way page to locate the handset, follow these steps: Handset On Base Handset Off Base Pick up handset Press These Keys You Will Hear PressT. Answer
Inhaltszusammenfassung zur Seite Nr. 10
Color profile: Disabled Composite Default screen Programming Your Phone All programming functions must be completed 5. Enter the number to be dialed in tone mode. when your phone is in the standby mode because 3300 programming keys do not function while you are on the phone. 6. If a pause is needed during dialing to access a long distance service, press . P Storing a Number in Memory P3300 Use these keys to store a number in memory. P Note: The button counts as one digit. PressingP more than on
Inhaltszusammenfassung zur Seite Nr. 11
Color profile: Disabled Composite Default screen Troubleshooting If your XC800 Series Cordless Telephone is not performing to your expectations, please try these simple steps. If you are still unable to resolve the problems, contact Uniden Customer Service at (800) 297-1023, 8:00 a.m. to 5:00 p.m. Central, Monday through Friday. Problem Suggestion Status light won’t come on when handset is placed in base. • Make sure AC adapter is plugged into the base and wall outlet. • Make sure handset is pr
Inhaltszusammenfassung zur Seite Nr. 12
Color profile: Disabled Composite Default screen Covered under one or more of the following U.S. patents: 4,511,761 4,523,058 4,595,795 4,797,916 5,426,690 5,650,790 5,660,269 5,661,780 and other patents pending ® ©1998 Uniden America Corporation. All rights reserved. Printed in China. UDZZ01518ZB H:...folded xc800series.vp Thu Jul 09 15:07:55 1998
