Inhaltszusammenfassung zur Seite Nr. 1
UIP300
(H.323 IP Phone)
Administrator
Guide
Inhaltszusammenfassung zur Seite Nr. 2
Preface This Document This document provides instructions to user for operating UIP300 IP Phone. This manual provides a detailed description of the telephone, LCD displays and features. Basic telephone operations and features are explained. Setup and configuration instructions are also provides. *Uniden® is a registered trademark of Uniden America Corporation. *Artisoft® and Televantage® are registered trademarks of Artisoft, Inc.
Inhaltszusammenfassung zur Seite Nr. 3
Regulatory Information FCC Part 15 Complies with the limits for a Class B computing device pursuant to Subpart B of Part 15 of FCC Rules. U.L. Compliance This equipment complies with Underwriters Laboratories Standard U.L. 60950. Repairs NO REPAIRS CAN BE DONE BY THE CUSTOMER Hearing-Aid Compatibility The equipment is hearing-aid compatible. The act of monitoring or recording telephone conversations under certain circumstances may violate federal or state statutes. Consultation with your legal c
Inhaltszusammenfassung zur Seite Nr. 4
Important Safety Considerations When using this product, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons, including the following: 1 Read and understand all instructions. 2 Follow all warnings and instructions marked on the product. 3 Unplug this product from the wall outlet before cleaning. Do not used liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning. 4 Do not use this product near water; for example, near a
Inhaltszusammenfassung zur Seite Nr. 5
Important Electrical Considerations Unplug all electrical appliances when you know an electrical storm is approaching. Lightning can pass through your household wiring and damage any device connected to it. This product is no exception. WARNING! Please do not attempt to unplug any appliance during an electrical storm. The FCC Wants You to Know Changes or modifications to this product not expressly approved by the party responsible for compliance could void the user’s authority to operate the
Inhaltszusammenfassung zur Seite Nr. 6
Table of Contents Chapter 1 Product Description General Information ..........................................................................................8 Standard Features of the Telephone ................................................................9 VoIP Specific Features......................................................................................9 General Features ..............................................................................................9 Control and Func
Inhaltszusammenfassung zur Seite Nr. 7
Handset Volume Control ........................................................................26 Speakerphone Volume Control ..............................................................26 Headset Volume Control ........................................................................27 Ringer Volume Control ..........................................................................27 Feature Operations ........................................................................................28 Ha
Inhaltszusammenfassung zur Seite Nr. 8
Terminal Subnet Mask............................................................................50 Default Gateway IP Address ..................................................................51 Enable/Disable VLAN ............................................................................52 VLAN ID ................................................................................................53 Restore Factory Settings........................................................................54
Inhaltszusammenfassung zur Seite Nr. 9
List of Figures Figure 1-1 UIP300 IP Phone..........................................................................8 Figure 2-1 Footstand Mounting....................................................................13 Figure 2-2 Plugging Handset Cord into Telephone......................................14 Figure 2-3 Connecting to LAN ....................................................................14 Figure 2-4 Web Login Screen...................................................................
Inhaltszusammenfassung zur Seite Nr. 10
Chapter 1 Product Description General Information UIP300 is a business IP telephone in an enterprise LAN environment and will be connected to a softswitch. This chapter describes the features of the UIP300 IP Phone and protocols that are used. Message Waiting Indication Select LCD Cancel/Del Menu Up/Down Arrow Keys Function Keys (5) Line 1 Line 2 Mute Volume Up/Down Redial Speakerphone and Conference Headset Transfer Hold Figure 1-1 UIP300 IP Phone 8
Inhaltszusammenfassung zur Seite Nr. 11
Standard Features of the Telephone The UIP300 comes equipped with the following standard features. • 2-line, 24-character alphanumeric LCD display • 10 LED indicators (Line 1, Line 2, Message Waiting Indication, Mute, Speaker/Headset, five Function keys) • 12-key dial pad • 20 specific keys (five Function keys, Menu, Select, Cancel/Del, Transfer, Mute, Redial, Hold, Conference, Speaker, Line 1 and 2 keys, Volume Up/Down keys, Menu Up/Down keys) • Date and time configured locally or from SNTP Ser
Inhaltszusammenfassung zur Seite Nr. 12
Control and Functions of the Telephone To make telephone operations easier and to avoid user confusion, many required functions are already programmed into the fixed function keys. There are 15 fixed function keys in UIP300. • Speaker – Turn speakerphone or headset on/off • Mute – Enable/disable the Mute function • Hold – Hold the called party • Transfer – Generate a DTMF String which the user can set • Conference – Generate a DTMF String which the user can set • Redial – Generate a DTMF String
Inhaltszusammenfassung zur Seite Nr. 13
Table 1-1 LED Status LED LED On LED Blinking LED Off Speaker/Headset Turned on when the N/A When not used SPK/HS is pressed Mute While call is muted N/A While not muted Message Waiting When there is 1 or Arrival of Incoming Call when no more new Indication more new voice mail(s) when voice mail or no It is a regular call incoming call It is a call waiting call is waiting (Fast blinking) Line 1 When in use When Line 1 is on hold. When not in use (Slow blinking) When incoming call comes thru
Inhaltszusammenfassung zur Seite Nr. 14
Optional & Replacement Equipment The following equipment is available for use with your UIP300 IP Phone. The table below provides a description and Stock Number. Table 1-2 Optional & Replacement Equipment Description Part Number Equipment Diagram 1 AC Adapter AD300 Cord UIPA3035 Handset UIPA3030 Headset EXP9530 EXP9730 5 Port 10/100 PCS500 Ethernet 1. This product is intended to be supplied by a listed direct plug-in power unit marked “Class 2” or “LPS’ and rated 48Vdc with minimum 0.25A outp
Inhaltszusammenfassung zur Seite Nr. 15
Chapter 2 Installation and Basic Setup Instructions General Information This chapter provides instructions for installing the foot stand on the IP telephone, connecting the IP telephone to the LAN and sample setup instructions for setting up the telephone. Attaching the Footstand to the Telephone The footstand is included with the IP telephone. The footstand can be attached to the bottom of the IP telephone, allowing the user to tilt the telephone at either low or high angle or to wall mount the
Inhaltszusammenfassung zur Seite Nr. 16
Connecting the Telephone Before using UIP300, it is necessary to connect the handset to the telephone and to connect the telephone to the LAN network. 1. Connect the handset to the handset port located on the left side of the telephone. Handset Port Figure 2-2 Plugging Handset Cord into Telephone 2. Connect the Ethernet cable from the LAN to the network port on UIP300. The network port is located on the back side of the telephone. Do not connect UIP300 to a standard telephone line. 3. If a powe
Inhaltszusammenfassung zur Seite Nr. 17
Quick Setup Procedure This example provides steps for configuring an IP telephone via terminal based configuration (User interface) and the web browser based configuration. Both UIP300 terminal interface and the web browser are used when modifying the information for the operation of UIP300. This example assumes that UIP300 is connected to a Televantage® system. The IP terminal must be configured, before the web browser is configured. Terminal Configuration using UIP300 To access the Phone Confi
Inhaltszusammenfassung zur Seite Nr. 18
The default password is 654321. If an incorrect password is entered, the message “Incorrect Password” is displayed for one second. The Password screen is returned and the password can be entered again. Incorrect Password 5. Once the correct password is entered, the DHCP option is displayed (default is Disabled). Press Select to access the Disabled screen. Network Config: 1/6 DHCP Disabled 6. Press Select to accept the Disabled option or press to access the Enable option. If Disabled is the
Inhaltszusammenfassung zur Seite Nr. 19
7. Use to access the IP Address screen on the Network Config menu. Network Config: 2/6 IP Address 8. Press Select to display the previous IP address. 9. Press Select again and enter the new IP address. The format of the IP address is: XXX.XXX.XXX.XXX Numbers 0~255 are valid entries for the IP address. The following IP addresses, 0.0.0.0 and 255.255.255.255, are not valid. 10. After the correct IP address is entered, press Select. 11. When the “Press Select to Restart” message is displayed, p
Inhaltszusammenfassung zur Seite Nr. 20
16. When the “Press Select to Restart” message is displayed, press Cancel/Del to return to the Network Config menu. The new Subnet Mask address is not recognized until the telephone has been restarted. When the telephone has been restarted, the LCD shows “Initializing...\”. After initialization is complete, the telephone returns to the time and date display. 17. Press to access the Default Gateway screen. Network Config: 4/6 Default Gateway 18. Press Select to display the previous Gateway IP a
