Inhaltszusammenfassung zur Seite Nr. 1
UIP165P
OWNER'S
MANUAL
Inhaltszusammenfassung zur Seite Nr. 2
Contents Welcome/Features/Terminology 2 Using the Phonebook and Speed Dial 44 Controls & Functions 5 Entering New Phonebook Entries and Speed Dial Numbers 44 Setting up your Broadband Phone 7 Chain Dialing 45 Viewing the Phonebook 46 Before You Start! 8 Making Calls Using the Phonebook 47 Expanding Your Phone 14 Ten Handset Expandability 14 Speed Dialing 47 Registering Expansion Handsets 14 Editing or Erasing a Phonebook Entry 48 Copying Phonebook Entries 49 Installing the Beltclip 16 Caller ID
Inhaltszusammenfassung zur Seite Nr. 3
With the UIP165P voice-over-Internet Protocol (VoIP) telephone, Packet8 VoIP service Welcome and your broadband connection, you can access the Internet and make phone calls simultaneously. The UIP165P can connect directly to your broadband modem or can connect to a router or switch in your home network. It generates and receives voice data and forwards data traffic to your computer or network. Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manua
Inhaltszusammenfassung zur Seite Nr. 4
This series features AutoTalk and AutoStandby. AutoTalk allows you to answer a call by just removing the handset from the cradle so you don't have to waste time pushing buttons. AutoStandby allows you to hang up by simply returning the handset to the cradle. To protect you against mis-billed calls that might result from your phone being activated by other equipment, this series has Random Code digital security, which automatically selects one of more than 10,000,000 digital security codes
Inhaltszusammenfassung zur Seite Nr. 5
Accessibility If you have a disability and need customer service assistance or if you have any questions about how Uniden's products can accommodate persons with disabilities, please call the accessibility voice/TTY line:1-800-874-9314 A representative is available to talk to you M-F, 8:00 am to 5:00 pm, CST. After hours, you can leave us a message, and we will call you back. Information is also available on our website, www.uniden.com, under the "Accessibility" link. Terminology Standby Mo
Inhaltszusammenfassung zur Seite Nr. 6
CONTROLS & F UNC TIONS Controls & Functions 1 1. Handset Antenna 5 2. Beltclip Hole 14 3. Speakerphone Speaker and Ringer 6 4. Handset Battery Compartment 2 5. New Message LED 6. Handset Earpiece 7. LCD Display 7 8. soft Keys (P. 18) 3 9. cid/vol/ (volume up) (P. 51, 36 & 19) 10.redial/p/vol/ (volume down) (P. 35, 36 & 19) 8 15 11. /tone/< (P. 20) * 9 16 12. (speaker) (P. 32 & 33) 13.intcom/hold (P. 39 & 34) 10 17 14.Headset Jack Cover 15.talk/flash (P. 32, 33 & 34) 4 16.end (P. 19 & 32) 17. (p
Inhaltszusammenfassung zur Seite Nr. 7
CONTROLS & F UNC TIONS 22 23 24 46 25 26 27 28 45 44 29 43 30 42 31 32 41 47 48 49 50 51 40 39 38 37 36 35 34 33 22. (phonebook) (P. 44) 33. phone LED 44. intcom (intercom) (P. 40) 23. exit (P. 19 & 52) 34. wan LED 45. Base Charging Contacts 24. LCD Display 35. lan LED 46. Base Antenna 25. volume / (up/down) 36. link LED 47. POWER port (P. 36 & 19) 37. pwr (power) LED 48. RESET switch 26. Soft keys (P. 18) 38. /tone/< (P. 20) 49. INTERNET[WAN] port * 27. (Caller Id) (P. 51) 39. in use LED 5
Inhaltszusammenfassung zur Seite Nr. 8
SETTING UP YOUR GET T I N G STARTED B R OA DB A ND P H ONE Setting up your Broadband Phone Safety Recommendations To ensure general safety, follow these guidelines: Do not open or disassemble this product. Do not expose the product to moisture. Do not perform any action that creates a potential hazard to people or makes the equipment unsafe. Ultimate disposal of this product should be handled according to all national laws and regulations. Do not touch the wires on the cable ports o
Inhaltszusammenfassung zur Seite Nr. 9
SETTING UP YOUR B R OA DB A ND P H ONE 911 Service Notice 911 dialing is not automatic. note Packet8 offers Enhanced 911 calling as a standard feature of its Internet phone service. However, there are certain circumstances, when you dial 911 from a phone connected to the Packet8 service, where E911 service may not function, or the E911 If you ordered your service may be in some way limited by comparison to traditional 911 service. Please UIP165P directly from review the Terms and Conditio
Inhaltszusammenfassung zur Seite Nr. 10
SETTING UP YOUR B R OA DB A ND P H ONE STEP 2: Install the rechargeable battery pack into the handset The handset is powered by a rechargeable battery pack. The battery recharges note automatically when the handset is placed in the cradle. 1) Press down on the handset battery case cover (use the Use only the Uniden finger indention for a better grip) and slide the cover (BT-446) rechargeable downward to remove. battery pack supplied 2) Plug the battery pack connector (red & black wires)
Inhaltszusammenfassung zur Seite Nr. 11
SETTING UP YOUR B R OA DB A ND P H ONE STEP 3: Check Your Broadband Configuration The UIP165P supports the two most common broadband connection protocols: DHCP and PPPoE. If your broadband connection uses DHCP, you do not need to change any settings on the UIP165P. If your broadband connection uses PPPoE, you will need to enter your user name and password in "STEP 5: Activate your Packet8 Service" on page 13. If your broadband provider has given you a static IP address, you will need a spe
Inhaltszusammenfassung zur Seite Nr. 12
SETTING UP YOUR B R OA DB A ND P H ONE 2) Use another Ethernet cable to connect your PC to the RJ-45 port labeled ETHERNET (LAN). note You can also connect a wireless access point to the ETHERNET (LAN) port, if desired. PHONE is not a separate line. Any phone connected to PHONE will share VoIP line with all the UIP165P's cordless 3) OPTIONAL: If you have a second phone you want to use, connect it to the RJ-11 port handsets and base. labeled PHONE. CAUTION Do not connect the UIP165
Inhaltszusammenfassung zur Seite Nr. 13
SETTING UP YOUR B R OA DB A ND P H ONE 4) Use the included AC adapter to connect the POWER port to a 100-240 Vac continuous power outlet. CAUTION To avoid risk of fire or electrical hazard, use ONLY the included AC adapter! LEDs flash several times, and the pwr LED will remain on. If the UIP165P was properly recognized by Packet8’s network, the link LED will remain on. Test your connection by making a call with the handset and browsing to a web page from your PC. If you have any diffic
Inhaltszusammenfassung zur Seite Nr. 14
SETTING UP YOUR B R OA DB A ND P H ONE STEP 5: Activate your Packet8 Service Once you have connected your UIP165P, you can activate your Packet8 service. You will need your 10-digit activation code that was sent to you by email when your Packet8 order shipped. (You can also obtain your activation code at www.packet8.net by signing in at your account page.) Pick up your telephone handset and dial the Activation Service number **012-0001. Follow the voice instructions and enter your 10-di
Inhaltszusammenfassung zur Seite Nr. 15
E X PANDING YOUR PHONE Expanding Your Phone Ten Handset Expandability Your phone supports up to ten handsets, including any handsets supplied with your phone. You can place a fully-featured cordless handset anywhere power is available to connect the handset charger. All the registered handsets ring when a call is received. Your phone is compatible with a variety of handsets, including the TCX805, TCX905, ELX500, TCX400, TCX440 and TCX450. (Please check www.uniden.com for an updated list of
Inhaltszusammenfassung zur Seite Nr. 16
E X PA NDING YOUR PH ONE To register an ELX500, TCX450, TCX440, or TCX400 handset, follow the steps below: 1) Disconnect the AC adapter from the main base. 2) While pressing down find hs, reconnect the AC adapter. 3) On the handset, press and hold # until you hear a beep. While the handset is registering, Handset Registering will appear in the LCD. When Registration Complete is displayed, the handset has been registered to the base. If Registration Failed appears, please try these steps agai
Inhaltszusammenfassung zur Seite Nr. 17
I N STA LLING TH E BE LTCLI P Installing the Beltclip To attach the beltclip Insert the beltclip into the holes on each side of the handset. Press down until it clicks. To remove the beltclip Pull either side of the beltclip to release the tabs from the holes. Headset Installation Your cordless handset may be used with an optional headset. To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations. (Headsets may be purchased by calli
Inhaltszusammenfassung zur Seite Nr. 18
Display and Icons Example of the standby mode display Handset Ringer off icon (when the ringer is off)/ day of the week and time / battery icon Handset ID and Banner Number of new Caller ID calls received (If there are no new Caller ID messages, Handset ID appears here.) •Base Day of the week and time envelope icon * Ringer Volume Level Number of new Caller ID calls received * This icon changes depending on ringer volume level (High, low and off) ICON Appears During DESCRIPTION Battery icon
Inhaltszusammenfassung zur Seite Nr. 19
S O FT KEY FUNCTION Soft Key Function "Soft" keys are keys that change function during the operation of the phone. The function of each soft key is determined by the icon that appears directly above it. For example, when the handset is in standby mode, pressing soft key 2 will access the main menu. When the handset is in talk mode, pressing soft key 1 will mute the microphone. Complete information on the features controlled by the soft keys can be found under each feature. There are three s
Inhaltszusammenfassung zur Seite Nr. 20
Accessing the menus Below are some tips for using the software interface on your phone. Press the MENU soft key to access the main menu. Use volume up/down to scroll through options. Press the OK soft key to make a selection. Press the BACK soft key to return to the previous screen. Press end or exit to exit the menu. Entering letters and special characters There are several places in your phone where you may want to enter letters and other special characters, for instance, as part o
