Inhaltszusammenfassung zur Seite Nr. 13
Ontario.fm Seite 13 Freitag, 28. November 2003 2:35 14 or ... Select the menu item and confirm. [RESE __________________ T NO? ____________________________] g In order to be able to use the handset again, you must register it i on your base again (see page 5). Base When resetting, all registered handsets are deregistered and have to be re- registered manually (see page 10). c Press the talk key. g Open the menu. s [___ BA _____SE RES ______________________ ET ________________] g Select the
Inhaltszusammenfassung zur Seite Nr. 14
Ontario.fm Seite 14 Freitag, 28. November 2003 2:35 14 ! Contact with liquid If the handset should come into contact with liquid, on no account switch the device on. Remove all batteries immediately. Allow the liquid to drain out of the device, and then pat all parts of the device dry. Keep the handset with the batteries removed in a warm, dry place for at least 72 hours. You will normally then be able to use it again. Range The range is up to 300 m in the open. In buildings, ranges of up
Inhaltszusammenfassung zur Seite Nr. 15
Ontario.fm Seite 15 Freitag, 28. November 2003 2:35 14 If the device needs to be repaired, please contact one of our Customer Care Centers: Abu Dhabi. . . . . . . . 0 26 42 38 00 Lithuania . . . . . . . . . 8 22 74 20 10 Argentina . . . . . . 0 80 08 88 98 78 Luxembourg . . . . . . . 43 84 33 99 Australia . . . . . . . . 18 00 62 24 14 Macedonia . . . . . . . . .02 13 14 84 Austria . . . . . . . . . 05 17 07 50 04 Malaysia . . . . . . . . 03 21 63 11 18 Bahrain . . . . . . . . . . . . . . 40
Inhaltszusammenfassung zur Seite Nr. 16
Ontario.fm Seite 16 Freitag, 28. November 2003 2:35 14 In some countries repair and replace services are impossible where the products are not sold through our authorised dealers. Your Gigaset is designed for operation in your country, as indicated on the packaging and on the device itself. Country-specific conditions have been taken into account. If you have any questions about the differences between the public phone networks, please contact your specialist dealer or network provider. T
Inhaltszusammenfassung zur Seite Nr. 1
Ontario.fm Seite 1 Freitag, 28. November 2003 2:35 14
Gigaset A110 s
Coloured label
Display
Display symbols (display screen)
- Ringer off
Special characters:
n Hash (#)
- New entry in
R Recall key
caller list
Battery charging
- Entering
numbers/letters: status
the f key deletes
= Battery flat
the character to the left
Ú U Battery fully charged
U
of the cursor
flashing: Battery almost
0 1 2 3 4 5 6 7 8 9
flat
ß
Û
Function key
Set/OK key
In idle status:
- Enter the menu
-Directory
- C
Inhaltszusammenfassung zur Seite Nr. 2
Ontario.fm Seite 2 Freitag, 28. November 2003 2:35 14 Version: 28.11.2003 A31008- A110- J100- 1- 7619 Issued by Information and Communication mobile Schlavenhorst 88 D-46395 Bocholt © Siemens AG 2003 All rights reserved. Subject to availability. Right of modification reserved. Printed in Germany Siemens Aktiengesellschaft http://www.my-siemens.com Order No.: A31008-A110-J100-1-7619 Version: 28.11.2003 2
Inhaltszusammenfassung zur Seite Nr. 3
Ontario.fm Seite 3 Freitag, 28. November 2003 2:35 14 ! Safety precautions Read this manual and the safety precautions carefully before use. W Explain their content to your children, and the potential hazards associated with using the telephone. Only use the power supply unit supplied as indicated on the $ underside of the base. Insert only approved rechargeable batteries of the same type! i. e. Never use ordinary (non-rechargeable) batteries as they may pose a health hazard or cause in
Inhaltszusammenfassung zur Seite Nr. 4
Ontario.fm Seite 4 Freitag, 28. November 2003 2:35 14 Setting up the telephone for use Connecting the base station Power supply unit Phone jack with with mains cable phone cord (220/230 V) ◆ Insert the round jack on the mains cable into the socket on the underside of the base. ◆ Position cable in the cable recess (for strain relief). ◆ Plug the power supply unit into your power outlet. ◆ Insert the square jack on the telephone cable supplied into the socket on the underside of the base.
Inhaltszusammenfassung zur Seite Nr. 5
Ontario.fm Seite 5 Freitag, 28. November 2003 2:35 14 Setting up the handset for use The display is protected by a plastic film. Remove the protective plastic film! Remove the coloured label from the bag containing the batteries and stick it to the top of the handset (see illustration on page 1). Inserting the batteries ◆ To open the battery compartment, press the clip on the compartment cover inwards and lift off the cover. ◆ Insert the batteries ensuring correct polarity (see figure on le
Inhaltszusammenfassung zur Seite Nr. 6
Ontario.fm Seite 6 Freitag, 28. November 2003 2:35 14 Charging batteries Leave the handset in the base for approx. five hours to charge the batteries. Your unit is now ready to use and you can make calls. After initial charging, you can return your handset to the base after every call. Charging is controlled electronically. This ensures optimum battery charging without overloading. The batteries heat up during charging. This is normal and not dangerous. The battery charging status is corr
Inhaltszusammenfassung zur Seite Nr. 7
Ontario.fm Seite 7 Freitag, 28. November 2003 2:35 14 Calling Line Identification (CLIP) When you receive a call, the caller's telephone number is displayed in the display. Preconditions: 1. You have asked your network provider to display the caller’s telephone number in your display (CLIP). 2. The caller has asked the network provider for his number to be identified (CLIR). You may have to pay a charge to use calling line identification. i Please ask your network provider for details. D
Inhaltszusammenfassung zur Seite Nr. 8
Ontario.fm Seite 8 Freitag, 28. November 2003 2:35 14 Editing an entry h Open the directory. sg Select desired entry and confirm. ~ Edit the telephone number as required. g Confirm entry. ~ Edit the telephone number as required. g Confirm the entry, the display SAVED appears and you hear the confirmation tone. Deleting an entry h Open the directory. s Select the desired entry. g Hold down the key, DELETE? is displayed. g Confirm the entry, DELETED is displayed and you hear the confirmatio
Inhaltszusammenfassung zur Seite Nr. 9
Ontario.fm Seite 9 Freitag, 28. November 2003 2:35 14 Cutting into an external call At least two handsets are registered on the base. You are conducting an external call. An internal party can can cut into this call and take part in the conversation. This is indicated by a signal tone. Precondition: The BARGE IN function is activated (idle status: On). Activating/deactivating the function c Press the talk key. Open the menu. g ´ Confirm (On = ). s [___ BA _____RGE I _________________ N___
Inhaltszusammenfassung zur Seite Nr. 10
Ontario.fm Seite 10 Freitag, 28. November 2003 2:35 14 Manually registering Gigaset A 11 handsets. You can register up to three Gigaset A 11 handsets on your Gigaset A 110. However, internal calls between the handsets are not possible. Gigaset A 11 handset on Gigaset A 110 base Manual registration is necessary if ◆ automatic registration was unsuccessful, ◆ the handset supplied has been replaced. Step 1: g Open the menu. [______________________________________________] Select the menu item a
Inhaltszusammenfassung zur Seite Nr. 11
Ontario.fm Seite 11 Freitag, 28. November 2003 2:35 14 Handset settings Setting the handset volume The loudspeaker volume can be set during a call or after pressing the talk key and the ringer volume can be set during ringing using the s key. Setting ringer volume and ringer melodies using the menu g Open the menu. either ... Setting the ringer volume: [______________________________________________] Select the menu item and confirm. s RINGER VOL g Select the desired level (1–5) and s [__
Inhaltszusammenfassung zur Seite Nr. 12
Ontario.fm Seite 12 Freitag, 28. November 2003 2:35 14 Operation on a PABX The following settings are only necessary if your PABX requires them, please refer to the operating instructions for your PABX. c Press the talk key. g Open the menu. either ... Changing the dialling mode: [______________________________________________] Confirm. s DIAL MODE g Select the required dialling mode and s [___ PUL _________ S _____ E_____________________________] g confirm. or ... Change pulse pause rati
