Inhaltszusammenfassung zur Seite Nr. 1
43-1105.fm Page 1 Monday, August 30, 1999 1:57 PM
Cat. No. 43-1105
OWNER’S MANUAL
Please read before using this equipment.
ET-1105
Digital Spread Spectrum
900 MHz Cordless Telephone
with Caller ID/Call Waiting ID
Inhaltszusammenfassung zur Seite Nr. 2
43-1105.fm Page 2 Monday, August 30, 1999 1:57 PM FEATURES Your RadioShack ET-1105 Digital Headset Jack — lets you connect an op- Spread Spectrum 900 MHz Cordless tional headset (such as RadioShack Cat. Telephone uses advanced digital cord- No. 43-195) for hands-free convenience less technology to give you superior while you use the phone. sound quality and extended range. The telephone digitizes and scrambles your 20-Number Memory Dialing — lets you conversation before transmitting it be- st
Inhaltszusammenfassung zur Seite Nr. 3
43-1105.fm Page 3 Monday, August 30, 1999 1:57 PM Review Scrolling — lets you easily This telephone has been tested and scroll through all information stored in found to comply with all applicable UL the ET-1105’s Caller ID memory. and FCC standards. Phone Information Display — lets you see incoming Caller ID information and WARNING: To reduce the risk of fire or shock phone numbers as you dial them or re- hazard, do not expose this product to rain or moisture. call them from the ET-1105’s me
Inhaltszusammenfassung zur Seite Nr. 4
43-1105.fm Page 4 Monday, August 30, 1999 1:57 PM ference. This lack of privacy can occur Important Caller ID Information with any cordless phone. To use the phone’s Caller ID and Call Waiting features, you must be in an area where Caller ID and Call Waiting servic- READ THIS BEFORE es are available and you must subscribe INSTALLATION to the services. Each device that you connect to the Where Caller ID is offered, one or more phone line draws power from the phone of the following options a
Inhaltszusammenfassung zur Seite Nr. 5
43-1105.fm Page 5 Monday, August 30, 1999 1:57 PM CONTENTS Preparation .............................................................................................................. 6 Selecting a Location ........................................................................................... 6 Attaching the Handset’s Antenna ....................................................................... 6 Placing the Base on a Desk Top .............................................................
Inhaltszusammenfassung zur Seite Nr. 6
43-1105.fm Page 6 Monday, August 30, 1999 1:57 PM PREPARATION SELECTING A LOCATION PLACING THE BASE ON A DESK TOP You can place the phone on a desk top or table, or mount it on a standard wall Follow these steps to place the base on plate. Select a location that is: a desk, shelf, or table. • near an accessible AC outlet 1. Remove the bracket by holding in both tabs and gently pulling out the • near a telephone line jack wide end of the bracket. • out of the way of normal activities Tabs • a
Inhaltszusammenfassung zur Seite Nr. 7
43-1105.fm Page 7 Monday, August 30, 1999 1:57 PM 3. Insert the supplied AC adapter’s barrel plug into the DC 9V jack on the back of the base. 4. Route the adapter’s cord through the strain relief slot on the bottom of the base. 6. Plug the modular cord’s other end into a modular phone line jack. 7. Plug the adapter into a standard AC outlet. 8. Raise the base’s antenna to a verti- cal position. 5. Insert the tabs on the narrow end of the bracket into both upper slots on the bottom of the bas
Inhaltszusammenfassung zur Seite Nr. 8
43-1105.fm Page 8 Monday, August 30, 1999 1:57 PM 4. Push the tabs on the wide end of the MOUNTING THE BASE ON bracket into the lower slots on the A WALL PLATE bottom of the base. 1. Follow Steps 1 through 3 under “Placing the Base on a Desk Top” on Page 6. 2. Route the modular cord through the left groove on the bottom of the base and the adapter cord through the groove below the strain relief slot. 5. Plug the short modular cord’s other end into the wall plate jack, align the base’s keyhol
Inhaltszusammenfassung zur Seite Nr. 9
43-1105.fm Page 9 Monday, August 30, 1999 1:57 PM 6. Plug the adapter into a standard AC 2. Plug the battery pack’s connector outlet. into the socket in the compartment. The connector fits only one way. 7. Raise the base’s antenna to a verti- cal position. Note: For easier battery pack con- nection, lift it out of the compart- ment, insert its connector into the socket, then replace the battery pack inside the compartment. 3. Replace the cover. To charge the battery pack, place the CONNECTI
Inhaltszusammenfassung zur Seite Nr. 10
43-1105.fm Page 10 Monday, August 30, 1999 1:57 PM Notes: was the handset that lost power, leave the handset on the base to • You can place the handset on the charge the battery pack. base face down or face up without removing the belt clip. If you want to • If the battery pack gets weak during use the hanging hole on the back of a call, the handset beeps once ev- the handset to place the handset on ery 16 seconds. If this happens, you the wall-mounted base face-up, re- cannot make another ca
Inhaltszusammenfassung zur Seite Nr. 11
43-1105.fm Page 11 Monday, August 30, 1999 1:57 PM SETTING THE DIALING SELECTING THE MODE LANGUAGE Set T/P (Tone/Pulse) on the back of the The ET-1105 comes set to display all base for the type of service you have. If Caller ID messages in English, but if you you are not sure which type you have, want it to display messages in French or once the battery is fully charged, do this Spanish, follow these steps. test. 1. Press SETUP on the handset. LAN- 1. Set T/P to T. GUAGE and the currently se
Inhaltszusammenfassung zur Seite Nr. 12
43-1105.fm Page 12 Monday, August 30, 1999 1:57 PM SETTING THE AREA SETTING THE RINGER CODE Turning the Ringer On or Off When you return a call from a Caller ID You can turn the ET-1105’s ringer on record (see “Dialing Numbers from a and off. Set RINGER on the side of the Caller ID Record” on Page21), your handset to ON to hear an incoming call or phone automatically dials 1, the area a page from the base. Set RINGER to code, and the number. The ET-1105 lets OFF to silence the ringer. you sto
Inhaltszusammenfassung zur Seite Nr. 13
43-1105.fm Page 13 Monday, August 30, 1999 1:57 PM • If you place the handset on the base USING A HEADSET to recharge it while the headset is connected, be sure the handset You can make or answer calls with seats properly. hands-free convenience using an option- 3 al headset that has a /32-inch (2.5 mm) plug. We recommend RadioShack Cat. No. 43-195, which is specially designed REMOVING THE BELT for use with the ET-1105. CLIP Follow these steps to use a headset. The belt clip on the back of t
Inhaltszusammenfassung zur Seite Nr. 14
43-1105.fm Page 14 Monday, August 30, 1999 1:57 PM TELEPHONE OPERATION • If you hear loud static during a con- MAKING AND RECEIVING versation, move the handset closer A CALL to the base. To make a call, lift the handset and • OUT OF RANGE appears when the press TALK. PHONE displays. When the distance from the handset to the TALK indicator lights steadily and you base is out of the phone’s range. hear the dial tone, dial the desired phone number or memory number (see “Memo- ry Dialing” on Pa
Inhaltszusammenfassung zur Seite Nr. 15
43-1105.fm Page 15 Monday, August 30, 1999 1:57 PM • We recommend you not use REDIAL 3. When the service answers, press to dial numbers that include a tone . Q appears. Any additional num- entry. This could result in a wrong bers you dial are sent as tone sig- number being dialed. (See “Using nals. Tone Services on a Pulse Line.”) 4. After you complete the call, return • The redial memory does not store a the handset to the base or press flash entry or any digits entered af- TALK. The phone a
Inhaltszusammenfassung zur Seite Nr. 16
43-1105.fm Page 16 Monday, August 30, 1999 1:57 PM Each stored number can be up to 16 dig- If you enter an incorrect digit, start its long. from Step 1, then re-enter the cor- rect digit. 3. Press MEM. ENTER 01-20 ap- Storing a Number in Memory pears. Notes: 4. Enter a two-digit memory location number between 05 and 20 (01–04 • If T/P is set to P and you want to use are reserved for your VIP Call List). tone dialing for a memory number, The ET-1105 beeps twice, and the you must store a as th
Inhaltszusammenfassung zur Seite Nr. 17
43-1105.fm Page 17 Monday, August 30, 1999 1:57 PM Entering a Pause Dialing a Memory Number In some telephone systems, you must 1. Press TALK. The TALK indicator dial an access code (9, for example) and lights. wait for a second dial tone before you 2. When you hear the dial tone, press can dial an outside number. You can MEM then enter the 2-digit memory store the access code with the phone location number. The ET-1105 auto- number. However, you should also store matically dials the displaye
Inhaltszusammenfassung zur Seite Nr. 18
43-1105.fm Page 18 Monday, August 30, 1999 1:57 PM Testing Stored Emergency Deleting Information in All Numbers Memory Locations If you store an emergency service’s 1. Press CALL ID, then press #/ . number (police department, fire depart- TOTAL MEM=xx displays. ment, ambulance) and you choose to 2. Press DELETE. DELETE ALL? ap- test the stored number, make the test pears. call during the late evening or early morning hours to avoid peak demand pe- 3. Press DELETE again to confirm de- riods.
Inhaltszusammenfassung zur Seite Nr. 19
43-1105.fm Page 19 Monday, August 30, 1999 1:57 PM CALLER ID OPERATION If you subscribe to Caller ID service from If you subscribe to your phone compa- your phone company, the ET-1105 auto- ny’s message waiting service, your sys- matically displays the information the tem informs you when you have a phone company sends, along with the message waiting. If the IN USE and date and time the call was received, be- MESSAGE indicators on the base flash tween the first and second rings of every (or
Inhaltszusammenfassung zur Seite Nr. 20
43-1105.fm Page 20 Monday, August 30, 1999 1:57 PM CALLER ID DISPLAYS English Display — French Description Spanish xx NEW CID The first line indicates the number of new calls. The sec- TOTAL CID= xx ond line shows the total number of Caller ID records in NOUV IDAP memory. TOUT IDAP=xx NUEV. ID. TOTAL ID.=xx ERROR Appears when the Caller ID information was garbled, or if ERREUR there was an error during the transmission. ERROR PRIVATE Appears if the caller chose to block sending Caller ID in
