Bedienungsanleitung Philips SE140

Inhaltszusammenfassung zur Seite Nr. 1

Digital cordless phone SE140
Digital cordless phone with answering machine SE145
Welcome
Quick start guide
Connect
1
Install
2
Enjoy
3

Inhaltszusammenfassung zur Seite Nr. 2

What’s in the box? SE140/SE145 handset SE140 or SE145 base Power adaptor Line cord* Battery door 2x AAA rechargeable batteries User manual Quick start guide Warranty information Notes * The line adaptor may not be attached to the line cord. If this is the case, please connect the line cord to the line adaptor before plugging it into the line socket. • If you have purchased a multipack you will have additional handsets, chargers, power adaptors and AA

Inhaltszusammenfassung zur Seite Nr. 3

Connect 1 A Position the base Tip Placing the base too close to large metal objects or electrical appliances can impair the range and sound quality. Thick walls may also impair transmission of signals to and from the base. Place the base within reach of the telephone line and power sockets. B Connect the cables C Plug into the sockets Plug the line cord and power Plug the other end of the cables cable into the sockets at the into the wall sockets. back of the base.

Inhaltszusammenfassung zur Seite Nr. 4

Warning Install Leave the handset to charge for 2 at least 24 hours before fi rst use. A Install the batteries C Set up your phone If the display shows the standby screen, your phone is ready to use. Or If the display shows CODE: you must select the country code for your area. Please see page 15 in the main user guide for more information. Insert the batteries and slide the • Scroll or to display the battery door into place. correct code. • Press to confi rm. B Charge handset The

Inhaltszusammenfassung zur Seite Nr. 5

Enjoy 3 Make a call Enter the phone number and • Enter the phone number, then press . press to confi rm. Answer a call Dial from the phonebook When the phone rings, press . • Press , then scroll or to the entry you want. End a call • Press to dial. Press . Set date and time Adjust earpiece volume • Press twice. During a call, press or . • Enter the date (DD-MM) and time (HH:MM). Redial last number • Press to confi rm. Press then . • Press to return to standby. Change the ringer vol

Inhaltszusammenfassung zur Seite Nr. 6

Troubleshooting For more solutions, see the full FAQs section in the main guide. No dialling tone The icon is blinking • Check the connections. • Move closer to the base. Unplug your phone then plug • Register the handset to back in the mains power. the base. • Batteries are empty – charge the batteries for Caller Line Identifi cation at least 24 hours. does not work • You may be too far from Check your subscription with the base – move closer. your network operator. • Use the line cable p