Bedienungsanleitung Oricom P90

Inhaltszusammenfassung zur Seite Nr. 1

TABLE OF CONTENTS



SAFETY INFORMATION ....................................................................3
Your Oricom P90 cordless phone ............................................................5
GETTING STARTED...............................................................................................5

LCD Display on the Handset ....................................................................5
LCD Display on the Handset .....................................

Inhaltszusammenfassung zur Seite Nr. 2

SAFETY INFORMATION NOTES FOR OPERATION IN NEW ZEALAND • Avoid exposure of this telephone to moisture or liquid. The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with the minimum • To prevent electric shock, do not open the handset or base cabinet. conditions for connection to its network. It indicates no endorsement of • Avoid metallic contact (e.g. metal clips, keys) between the battery the pr

Inhaltszusammenfassung zur Seite Nr. 3

LCD Display on the Handset Your Oricom P90 cordless phone Key lock CID Phonebook Mute Phone On Battery Ringer Off LCD Display Talk / Off Signal Left Arrow Right Arrow Program Digit Display Recall / Delete Redial / Pause Recall Duration Phonebook Key Beep Ringer Charge LED Icon List Call Log In Use LED Scrolling Displays the current battery level Page Key The handset is linked to the base / Ringer On-Off The phone

Inhaltszusammenfassung zur Seite Nr. 4

Basic Steps to Install BASIC OPERATION 1. Connect the plug of the mains adapter to the adaptor socket on the During Standby back of the base unit and the mains adapter to the wall mains supply. 2. Connect the telephone lead to the phone cord socket on the back of HS the base unit and to the wall phone socket. 3. Fit the 2 AAA batteries, observing the polarity, into the battery When the phone is in standby, the LCD displays the handset label. compartment on the handset.

Inhaltszusammenfassung zur Seite Nr. 5

2. To enter a pause, press and hold . A pause is displayed as “P”. 3. When you enter more than 14 digits, turns on. If you attempt to enter more than 20 digits, you’ll hear a reject tone. Adjust the volume 4. If you make a mistake, press to erase one digit at a time. Or you Press to adjust the receiver volume to High, Medium or Low. can press and hold for 2 seconds to clear the entire number and return the phone to standby. Mute the call 5. Press to se

Inhaltszusammenfassung zur Seite Nr. 6

When you see “PP” all across the display for a CID record, the call is Besides entering the number by normal dialling, you can also retrieve the from a private call or payphone. Similarly, an out-of-area call is indicated redial number or a CID record to save it as a phonebook record. by “OO” and a name-only CID by “—“. Phone numbers are not available for these calls. Deleting phonebook records The phonebook records can be deleted one at a time. Deleting CID records 1. Pres

Inhaltszusammenfassung zur Seite Nr. 7

Key Beep Base Ringer Volume When the key beep is turned on, you will hear a tone whenever you Pressing and holding on the base adjusts the base ringer volume. press a key on the handset. You have the option of turning on or off the The ringer will be played once at the new volume level. If the ringer is key beep. turned off, you will hear two short beeps. 1. Press 2 when you have entered into programming mode. You cannot change the base ringer setting when you are talk

Inhaltszusammenfassung zur Seite Nr. 8

Troubleshooting Warranty Information This product is covered by a 12 month warranty against defective workmanship Are you having trouble with your phone? Here are some of the most or parts, effective from the date of purchase. The warranty does not extend to common problems and solutions. damage caused by misuse, negligence, excessive voltage, faults on the telephone Problems Solutions line or lightning. This guarantee in no way affects your statutory rights. Full The