Inhaltszusammenfassung zur Seite Nr. 1
bringing people together
Oricom M5200 Series
Cordless phone with integrated
answering system
USER GUIDE
Keep this user guide
for future reference.
WARNING
!
DO NOT USE STANDARD/ALKALINE BATTERIES IN THIS PRODUCT, AS
THERE IS A RISK OF EXPLOSION AND/OR INJURY.
USE ONLY Ni-MH RECHARGEABLE BATTERIES AS SPECIFICED IN THIS
USER GUIDE. CONTACT ORICOM FOR REPLACEMENT BATTERIES.
Inhaltszusammenfassung zur Seite Nr. 2
Customer Support If you feel this product is not working correctly please consult the user guide and en- sure that you are using the product in accordance with the instructions. Remove all extra telephone equipment and connect only this telephone directly to the telephone socket. If the fault is still present, connect another telephone (if available) to the tele- phone socket. The results will show you whether the fault lies with this unit or with the telephone line. If the product is working
Inhaltszusammenfassung zur Seite Nr. 3
CONTENTS CONTENTS WARNINGS AND SAFETY INFORMATION ………………………………… 4 Getting Started ………………………………………………………………… 5 Installation and Charger ……………… 5 Understanding the cordless handset Pack contents …………………………… 6 display ………………………………… 8 Purchasing additional handsets ……… 6 Your M5200 base unit…………………… 9 Your cordless handset ………………… 7 Bottom ………………………………… 10 Basic Operation ………………………………………………………………… 11 Take two different calls at the same During standby ……………………… 11 Cordless handset's LCD display……
Inhaltszusammenfassung zur Seite Nr. 4
CONTENTS Caller ID Operation …………………………………………………………… 16 Review Caller ID records …………… 16 Delete one or all CID record(s) …… 17 Store a CID number ………………… 16 LNR Function (Last Number Redial)………………………………………… 18 Redial the last number ……………… 18 Delete last number dialled ………… 19 Store the last number dialled ……… 19 Phonebook ……………………………………………………………………… 20 Add new records ……………………… 20 Delete one record …………………… 21 Review / Edit / Dial stored Phonebook records ……………………………… 20 Cordless Handset Oper
Inhaltszusammenfassung zur Seite Nr. 5
CONTENTS Answering Machine Operation ……………………………………………… 28 Answering machine On / Off ……… 28 ICM (Incoming Messages) ………… 32 Record ICM ………………………… 32 Day/Time setting ……………………… 28 Answering machine Ring delay Setting 29 Play ICM……………………………… 32 Answering machine PIN number Setting 29 Memo …………………………………… 33 OGM (Outgoing Messages) ………… 30 Record memo ……………………… 33 OGM setting ………………………… 30 Play memo …………………………… 33 Record OGM ………………………… 30 Delete messages……………………… 33 Play OGM …………………………… 31 Delete o
Inhaltszusammenfassung zur Seite Nr. 6
WARNINGS AND SAFETY INFORMATION WARNINGS AND SAFETY INFORMATION Avoid exposure of this telephone to moisture interference in the form of a humming noise. or liquid. Your phone can interfere with electrical To prevent electric shock, do not open the equipment such as answering machines, TV handset or base cabinet. and radio sets, clock radios and computers if Avoid metallic contact (e.g. metal clips, keys) placed too close. It is recommended that you between the battery contacts and charging
Inhaltszusammenfassung zur Seite Nr. 7
GETTING STARTED Getting Started Installation and Charger . Connect the mains adaptor (supplied) to the socket on the back of the base unit 1 and to the wall mains supply. AC110~240V . Connect the telephone cord to the phone socket on the back of the base unit and 2 into the wall phone socket. . Insert 2 rechargeable Ni-MH AAA batteries (included), ob- 3 serving the correct polarity, into the battery compartment on the handset. Slide the battery door firmly into place. . Place the handset on th
Inhaltszusammenfassung zur Seite Nr. 8
GETTING STARTED Pack contents Depending on the model you have purchased this pack should contain the following items: If any of these are missing, please contact Oricom directly. M5200-1 M5200-2 M5200-3 M5200-4 Base units 1111 Cordless handsets 1234 Charger adaptors 1234 Power adaptors 1234 Line cord and modular adaptor plug 1111 User guide and Warranty card 1111 Handset Rechargeable AAA 2468 Ni-MH Batteries (1.2V 600mAh) Purchasing additional handsets You may expand your M5200 by adding more h
Inhaltszusammenfassung zur Seite Nr. 9
GETTING STARTED Your cordless handset 1 2 5 3 6 4 7 8 11 9 10 12 1. Talk 8. Numeric keys 2. Left / Recall 9. / Ringer Off (On) 3. Menu 10. Ringer Melody / Ringer Volume / 4. Phonebook Receiver Volume 5. Right / CID (Caller ID) / Handsfree 11. # / Keypad lock 6. Intercom 12. LNR (Last Number Redial) / 7. Delete / Mute Pause / Long (Short) flash 7
Inhaltszusammenfassung zur Seite Nr. 10
GETTING STARTED Understanding the cordless handset display Left Arrow / Phonebook records Connected to telephone line. are being reviewed Flashes when there is an incoming call X appears: microphone muted Battery level (3 bars fully charged) Caller display Ringer is turned off Antenna in range / out of range Speakerphone on Intercom call to another handset Keypad lock Right Arrow / Message waiting 8
Inhaltszusammenfassung zur Seite Nr. 11
GETTING STARTED Your M5200 base unit 1 2 16 3 VOLL 4 R P ANS MEMO 15 56 7 8 910 11 12 13 14 answering machine; Exit the current 1. Battery charge/Call Light operation mode 2. Message Full Light 8. Delete 3. Play/Pause Play MEMO/ICM Message; Pause 9. Forward/MEMO playback. Recording MEMO, Skip to next Message 4. Message/Power Light 10. Page Base page handset and call transfer 5. Rewind/OGM(ANS)
Inhaltszusammenfassung zur Seite Nr. 12
GETTING STARTED Bottom 2-9/GS (Answering Machine Rings) CODE (Answering Machine PIN) 10
Inhaltszusammenfassung zur Seite Nr. 13
BASIC OPERATION Basic Operation During standby Note: If the power is not connected to the base unit. The cordless handset CANNOT operate. Cordless handset's LCD display HANDSET 1 : Handset number HANDSET : Current battery level : A constant signal icon indicates the cordless handset is linked to the base unit. When signal icon is flashing the handset needs to be re-registered (see page 25). Answering an incoming call With cordless handset When there is an incoming call, the phone rings and
Inhaltszusammenfassung zur Seite Nr. 14
BASIC OPERATION Making an external call With cordless handset Normal dialling 1. Press key. 2. Enter a telephone number. If you enter more than 14 digits, you only see the last 14 digits on the display. 3. Press key to end the call. Pre-dialling 1. Enter a telephone number. 2. When necessary, press X to erase the digit individually. 3. Press key to dial. 4. Press key to end the call. With base unit 1. Press key. 2. Enter a telephone number. 3. Press key again or hang up the handset to e
Inhaltszusammenfassung zur Seite Nr. 15
BASIC OPERATION Recall feature Recall feature can be used when you are using some services provided by your network operators such as “call waiting”, etc. A subscription may apply for these services, contact your network operator for more information. While you are talking on the phone, press R key on the base unit or key on the cordless handset to send a Recall. Call waiting You can use the recall function to answer a second call while you are on the phone. However this service needs to be
Inhaltszusammenfassung zur Seite Nr. 16
BASIC OPERATION Recall function when connected to a PABX If you have connected your telephone to a PABX, you can use all the facilities such as call transfer, automatic recall, etc. The R key provides access to these facilities. Pause feature when using on a PABX Note: The pause function described in this section is only necessary when the M5200 is used on older PABX’s. With some PABX's, there is a short pause between the code for the outside line (usually 0 or 9) and obtaining dial tone. A p
Inhaltszusammenfassung zur Seite Nr. 17
BASIC OPERATION Volume adjustment (with base unit) Speaker volume control During speakerphone mode, 1. Press or key to adjust the Speaker volume level: Step 1(lowest) to Step 8 (hightest). 2. The unit automatically returns to the previous talking mode 2 seconds after pressing the last key. Ringer volume control During incoming call, 1. Press or to adjust the ringer volume level: 5 steps. 2. The unit automatically returns to the previous mode 2 seconds after pressing the last key. Volume a
Inhaltszusammenfassung zur Seite Nr. 18
CALLER ID OPERATION Caller ID Operation If you subscribe to your telephone operators service (charges may apply), numbers of the incoming calls will be displayed on the screen and stored in the call log (please consult your telephone service provider for details). The M5200 series can store the last 30 calls including: the record number, date/time, and phone number (up to 23 digits for the cordless handset). When you have new/unanswered calls, icon flashes on the base and flashes on the cord
Inhaltszusammenfassung zur Seite Nr. 19
CALLER ID OPERATION 4. Press the numeric keys to edit the Phone number. 5. Press key to confirm. The record is now saved into the phonebook. Then it goes back to the call log. Delete one or all CID record(s) Delete one CID record While you are viewing the CID record that you wish to delete, 1. Press X key. 2. Press key to confirm. The display shows previous CID record. Delete all viewed CID records While you are viewing any CID record, 1. Press and hold X key. 2. Press key to confirm. The di
Inhaltszusammenfassung zur Seite Nr. 20
LNR FUNCTION LNR Function (Last Number Redial) This function in only available for handset. Redial the last number Your cordless handset stores the last 3 external numbers dialled, up to 25 digits per number. If the number exceeds 25 digits, the first 25 digits will be stored to memory. During standby mode, 1. Press /P key. 2. When necessary, press /P key again until you have selected your desired number. 3. Press key to dial. Or 1. Press key. 2. Press /P key to redial the last number. 18
