Inhaltszusammenfassung zur Seite Nr. 1
TABLE OF CONTENTS
SAFETY INFORMATION............................................................................................ 3
GETTING STARTED................................................................................................... 3
Contents of Pack........................................................................................... 3
Your handset................................................................................................. 4
LCD display on the
Inhaltszusammenfassung zur Seite Nr. 2
Backlight ......................................................................................... 9 Conference call............................................................................. 17 Recall duration................................................................................ 9 DEFAULT SETTINGS............................................................................................... 17 Register .....................................................................
Inhaltszusammenfassung zur Seite Nr. 3
SAFETY INFORMATION GETTING STARTED Contents of Pack • Avoid exposure of this telephone to moisture or liquid. Depending on the model you have purchased the pack should contain the • To prevent electric shock, do not open the handset or base cabinet. following items:- • Avoid metallic contact (e.g. metal clips, keys) between the battery contacts and charging conductors. M2400 M2400+1 M2400+2 • Do not use the handset in an explosive hazard area such as where there Number
Inhaltszusammenfassung zur Seite Nr. 4
Your handset LCD display on the handset Flashlight CID Mute Phonebook Message Speaker Phone On Ringer Off Battery Signal Flashlight on/off Menu up/down Character LCD Display Menu / Display Scroll up Right Arrow Left Arrow Talk / Off / Exit Speaker New call Repeated call Phonebook Displays the current battery level. It scrolls during charging. OK / Redial The phone is in use. It blinks when phone rings. There is a new message (Subscription
Inhaltszusammenfassung zur Seite Nr. 5
Basic steps to install BASIC OPERATIONS 1. Connect the plug of the mains adaptor to the socket on the back of the During standby base unit and the mains adaptor to the wall mains supply. 2. Plugs the mains adaptor of the additional handset charger to the wall mains supply. 1 3. Insert 2 rechargeable batteries (included) in each handset observing the polarity, into the battery compartment of each handset. When the phone is in standby, the LCD displays the hands
Inhaltszusammenfassung zur Seite Nr. 6
Predialing During an external call Pre-dial allows you to enter a telephone number and verify it on the screen Call timer before you place the call. The screen displays the last 12 digits dialed but you can enter up to 20 digits. 1. Enter the phone number. 01-10 2. To enter a pause, press and hold . A pause is displayed as “P”. 3. When you enter more than 12 digits, turns on. If you attempt to enter The call timer will be displayed a short while after your call
Inhaltszusammenfassung zur Seite Nr. 7
Call Waiting Caller ID Reviewing CID records 1. Press when the phone is in standby. If the call log is not empty, If you have subscribed your telephone network operators Call Waiting Caller turns on and the caller name of the most recent CID record is displayed. ID service, your phone will display the number of the other incoming call for 2. Press OK to view the number. around 7 seconds while you are talking on the phone. 3. Press OK again to see the date / time w
Inhaltszusammenfassung zur Seite Nr. 8
1. Press and hold DEL until you are prompted to confirm the action. Deleting the entire redial list While you are viewing any previously redialed number, 2. Press OK . 1. Press and hold DEL until you are prompted to confirm the action. The call log is now empty. 2. Press OK . The redial list is now empty. DIALED NUMBERS Viewing the redial list USING THE PHONEBOOK Your phone stores the last 5 external numbers dialed, up to 20 digits each. Your phone can s
Inhaltszusammenfassung zur Seite Nr. 9
3. Press OK to select the record and edit the name. 2. Select HANDSET or BASE and press OK . 4. Press OK to confirm name change and edit the number. 3. Press when MELODY is displayed. OK 5. Press OK to confirm number change. 4. Press and to listen to and select from the 9 melodies. Repeat steps 1 to 5 to edit another record. 5. Press OK to confirm your selection. Handset / base ringer volume Deleting a phonebook record 1. In main menu, select RINGER
Inhaltszusammenfassung zur Seite Nr. 10
Reset If when you are using network services or a PBX the button does not If you reset the phone, all the settings will return to the factory default work you can select a different setting. settings. 1. In Settings menu, select RECALL and press OK . The current duration 1. In Settings menu, press and until RESET is displayed and will be displayed. press OK . 2. Select RECALL 1 or RECALL 2 and press OK to confirm. 2. Press OK again when you are prompted to
Inhaltszusammenfassung zur Seite Nr. 11
Display ANSWERING MACHINE The following table describes what the display symbols mean. LED 1: Page In-Use, Paging Display Meaning Ring Time OGM CL The clock is not set yet. FU Memory is full. No new messages can be recorded. LED 2: A AM Answer Machine P PM d1 Monday LED 3: d2 Tuesday Charging d3 Wednesday d4 Thursday Volume Up / d5 Friday Scroll Up d6 Saturday d7 7-Segment Sunday Display The answer machine is being accessed from an external
Inhaltszusammenfassung zur Seite Nr. 12
Getting started To turn on the answering machine: It is very simple to set up the Answering machine. The answer machine is 1. Press ON/OFF during standby mode. The answer machine equipped with voice prompt instructions to assist you. LED will turn on. 2. After answering the call, the answering machine will play the There is a real time clock on the answering machine, and it is used to record OGM and record an ICM. the time that each message was received. When the unit is turn
Inhaltszusammenfassung zur Seite Nr. 13
Recording your Greeting (OGM) Memo The maximum recording time for your Greeting (OGM) is 40 seconds. Once you record a new OGM, the old one will be overwritten. Recording a memo To record your own Greeting (OGM): You can record one memo for other users of the system to hear. The maximum recording time is 2 minutes. You must delete the first memo before 1. Press and hold GREETING for 2 seconds. Follow the voice recording a new memo. instruction to record your OGM. OG wil
Inhaltszusammenfassung zur Seite Nr. 14
If a user on a parallel phone picks up while the OGM is playing, pressing # 1. Press while listening to a message. will stop the playback. If a user on a parallel phone or the cordless handset picks up during recoding Note: The messages deleted can’t be recovered. The message will be of the callers message the recording will stop. permanently deleted on the first press of . The number of unheard message numbers will be blinking on the display, Deleting all old ICM and Mem
Inhaltszusammenfassung zur Seite Nr. 15
When Toll saver is selected, the answering machine will ring four times if no messages are recorded or two times if there is a new message. Remote access To review the current ringer delay setting, You can access your answering machine when you are away by using any 1. Press RING during standby. touch tone phone. To change the ringer delay setting, Note: You have to enter the Security PIN to access the answering machine. Refer to the section below on how to check the PIN
Inhaltszusammenfassung zur Seite Nr. 16
While playing the message, OTHER FEATURES To play previous message, press 1, Key lock To repeat current message, press 2, Press and hold during standby to lock the keypad. To play next message, press 3, To delete current message, press 0, To listen to the options again, press #. LOCKED 1 When the keypad is locked, you can still answer an incoming call by picking Security PIN up the handset from the base cradle or by pressing . During the call,
Inhaltszusammenfassung zur Seite Nr. 17
Paging the handsets You will be alerted with short beeps if you receive an external call during your intercom. Caller information will be displayed if it is available. You need to You can page or locate the handsets by pressing on the base. All end the intercom first before you can answer the external call. handsets registered to the base will produce the paging tone for 30 seconds and the screen displays blinking “oooo”. You could stop the paging by pressing any key
Inhaltszusammenfassung zur Seite Nr. 18
PIN for registration & deregistration: 0000 CID does not work • Check with your local phone company that Answer machine: On properly you have the required services on your line. Base audio volume: 4 • Let the phone ring at least once before Call screening: On answering. Message alert: On The CID Call waiting call • Check with your Network operator to ensure Greeting (OGM): Default cannot be answered you have the service. Ensure the correct ICM/Memo: Empty recall duration
Inhaltszusammenfassung zur Seite Nr. 19
WARRANTY INFORMATION This product is covered by a 12 month warranty against defective workmanship or parts. The warranty does not extend to damage caused by misuse, negligence, excessive voltage, faults on the telephone line or lightning. This guarantee in no way affects your statutory rights. Full details of the warranty are contained in the enclosed warranty card. If you feel this product is not working correctly please consult the user guide and ensure that you are using t