Inhaltszusammenfassung zur Seite Nr. 1
DIGITAL
KX-TCD725EM-0ï\éÜ(1) 01.10.24 14:35 Page 1
Digital Cordless Answering System
Model No. KX-TCD725EM
Operating Instructions
Caller ID Compatible
PLEASE READ BEFORE USE AND SAVE.
Charge the batteries for about 15 hours before initial use.
Inhaltszusammenfassung zur Seite Nr. 2
KX-TCD725EM-1(02~23) 01.10.24 14:36 Page 2 Dear purchaser, You have acquired a KX-TCD725EM, which is a product made in regard with the European Standards for Cordless Telephones (DECT). DECT technology is characterised by high-security protection against interceptions as well as high-quality digital transmission. This telephone was designed for a wide range of applications. For example, this telephone can be used within a network of base units and handsets, constituting a telephone system whi
Inhaltszusammenfassung zur Seite Nr. 3
KX-TCD725EM-1(02~23) 01.10.24 14:36 Page 3 Method of connection WARNING: This is connected to the exchange line or The apparatus may be unable to make PABX/PMBX (Private Automatic/Manual emergency 999 or 112 telephone calls, Branch Exchange) extension by the new under certain conditions, e.g. standard British Telecom plug and socket. • Radio interference caused by another Arrangements for provision of this type of cordless telephone operating on the termination can be made through the same rad
Inhaltszusammenfassung zur Seite Nr. 4
KX-TCD725EM-1(02~23) 01.10.24 14:36 Page 4 Thank you for purchasing your new Panasonic digital cordless telephone. •Order accessory items for all Communications Products with ease and confidence either by telephoning our Customer Care Centre on: 08705 357357 Monday - Friday 9:00am - 5:30pm •Or go on line through our Internet Accessory ordering application at www.panasonic.co.uk. •Most major credit and debit cards accepted. •All enquires transactions and distribution facilities are provided dir
Inhaltszusammenfassung zur Seite Nr. 5
KX-TCD725EM-1(02~23) 01.10.24 14:36 Page 5 Base Unit Location Calls are transmitted between the base unit and the handset using wireless radio waves. For maximum distance and noise-free operation, the recommended base unit location is: Away from electrical appliances such as a TV, In a HIGH and CENTRAL location with no radio, personal computer or another telephone. obstructions such as walls. Operating range: The range of operation depends on the construction of your home, weather and usage co
Inhaltszusammenfassung zur Seite Nr. 6
KX-TCD725EM-1(02~23) 01.10.24 14:36 Page 6 Contents Phonebook ........................................24 Chapter 1 Storing Caller Information into Preparation the Phonebook ................................24 Private Category Feature ................25 Location of Controls ..........................8 Private Category Table ....................26 Display .................................................9 Selecting Characters .......................27 Getting Started ............................
Inhaltszusammenfassung zur Seite Nr. 7
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5 Chapter 6 Chapter 7 KX-TCD725EM-1(02~23) 01.10.24 14:36 Page 7 Chapter 4 Chapter 6 Programmable Function Multi-Unit User Operations on the Base Unit Optional Multi-Unit User Operations..79 Operating More than One Summary of Programmable Handset ...........................................79 Functions on the Base Unit .............54 Operating More than One Base Base Unit PIN ....................................55 Unit ........................
Inhaltszusammenfassung zur Seite Nr. 8
DIGITAL KX-TCD725EM-1(02~23) 01.10.24 14:36 Page 8 Location of Controls Handset Back side Receiver Speaker (Redial/Pause) Display Button (Function/OK) Button (Phonebook) Button (OFF/Power) Button Headset Jack (Talk) button (Clear) Button C (Speakerphone) Button Navigator Key (Intercom) Button INT ( , , , ) Charge Contact (Capital Change) Button Microphone Charge Contact (Recal
Inhaltszusammenfassung zur Seite Nr. 9
Chapter 1 Preparation KX-TCD725EM-1(02~23) 01.10.24 14:36 Page 9 Display Handset Display ABCDEFGHIabcdefg 1234567890123456 Icons The in-range icon indicates that the The call prohibition icon is displayed handset is in range of the base unit. It when call prohibition mode is set to on flashes when the handset is out of range. (p. 50). The page/intercom icon is displayed The phonebook icon is displayed when when paging or using the intercom. It storing or viewing caller information flashes when
Inhaltszusammenfassung zur Seite Nr. 10
LINE 9v KX-TCD725EM-1(02~23) 01.10.24 14:36 Page 10 Getting Started Installing the Batteries in the Handset Install the batteries as shown, then install the handset cover. • If the rechargeable batteries are not inserted correctly, the handset will not work. Connections Plug in the AC adaptor cord and the telephone line cord to the bottom of the unit. Then connect the cords as shown. Hook Fasten the AC adaptor TNV* cord to prevent it from To B.T. Socket being disconnected Telephone Line Cord
Inhaltszusammenfassung zur Seite Nr. 11
Chapter 1 Preparation KX-TCD725EM-1(02~23) 01.10.24 14:36 Page 11 Battery Charge At the time of shipment, the batteries are not charged. To charge, place the handset on the base unit. Please charge the batteries for about 15 hours before initial use. During charging the battery icon is as shown below. Fully charged During charging (Flashing) You can check the present battery strength on the display. Battery strength Fully charged High Medium Low Need to be charged Battery icon (Flashing) (Flas
Inhaltszusammenfassung zur Seite Nr. 12
KX-TCD725EM-1(02~23) 01.10.24 14:36 Page 12 Basic Start-up Operations Turning the Power ON/OFF To turn the power ON To turn the power OFF Press and hold . Press and hold until a beep sounds. • After all possible configurations briefly • The display will go blank. appear, the display will change to the • The handset will not ring. standby mode. A beep sounds. • A beep sounds. Standby mode • If incoming/memo message(s) is/are recorded, the standby mode will be shown as below. Base 1 Base 1
Inhaltszusammenfassung zur Seite Nr. 13
Chapter 1 Preparation KX-TCD725EM-1(02~23) 01.10.24 14:36 Page 13 Basic Answering System Operations For further information on answering system, see page 67. You can operate the answering system by function menu or by pressing dialling button as direct command. If you set the current date and time (p. 64) and set the answering system ON, a synthesized voice announce the date and time an/a incoming/memo message was recorded after playback–Voice Date/Time Stamp. Pre-Recorded Greeting Message The
Inhaltszusammenfassung zur Seite Nr. 14
KX-TCD725EM-1(02~23) 01.10.24 14:36 Page 14 Making Calls For basic making a call operation, see page 12. Making a Call after Confirming the Entered Phone Number Make sure that the power is ON (p. 12), and the unit is in the standby mode. • After a few seconds, the display will start 1 Enter a phone number. showing the length of the call. • The entered number is displayed. • To cancel, press and hold (C) or press 3 Press or place the handset on the . base unit to hang up. • The handset will re
Inhaltszusammenfassung zur Seite Nr. 15
Chapter 2 Cordless Telephone KX-TCD725EM-1(02~23) 01.10.24 14:36 Page 15 Calling Back with the Caller List Information from up to 50 different callers is automatically stored from the most recent call to the oldest call in the Caller List. When the 51st call is received, the oldest caller information is deleted. If you receive a call from the same phone number you stored with name in the phonebook, the display will show the caller name also (p. 24). If the caller list is empty, “No Stored Memo
Inhaltszusammenfassung zur Seite Nr. 16
KX-TCD725EM-1(02~23) 01.10.24 14:36 Page 16 Making Calls Auto Talk The auto talk feature allows you to answer a call by lifting the handset off the base unit without pressing . The factory preset is OFF. In order to view Caller ID information before answering a call, leave the auto talk feature OFF. Make sure that the power is ON (p. 12), and the unit is in the standby mode. To set the auto talk feature ON/OFF 5Press or to select “ON” or “OFF”. 1Press . 2 Press or until the arrow points 6Press
Inhaltszusammenfassung zur Seite Nr. 17
Chapter 2 Cordless Telephone KX-TCD725EM-1(02~23) 01.10.24 14:36 Page 17 Answering Calls For basic answering a call operation, see page 12. If you subscribe to a Caller ID service, the caller information will be displayed after the first ring (p. 19). Make sure that the power is ON (p. 12), otherwise the handset will not ring. Selecting the receiver volume (HIGH, MEDIUM or LOW) or speaker volume (6 levels) during conversation Press to decrease volume, or press to increase volume. Ex. Receiver
Inhaltszusammenfassung zur Seite Nr. 18
KX-TCD725EM-1(02~23) 01.10.24 14:36 Page 18 Paging In multi-unit user operation, conversation between handsets is available with intercom feature (p. 83). Make sure that the power is ON (p. 12), and the unit is in the standby mode. Paging the Handset from the Base Unit (Handset Locator) Using this feature, you can locate a misplaced handset. 1 Press on the base unit. • The handset rings for 1 minute and “ ” flashes. INT 2 To stop paging, press , 0 to 9 , , , or on the handset or on the base un
Inhaltszusammenfassung zur Seite Nr. 19
Chapter 2 Cordless Telephone KX-TCD725EM-1(02~23) 01.10.24 14:36 Page 19 Caller ID Caller ID Service Caller ID, where available, is a telephone company service, and if you subscribe to this service, the caller information will be displayed after the first ring. If you subscribe to a Caller ID and Call Waiting service, when a second call is received while talking, the new caller’s phone number will be displayed. How caller information is displayed when a call is received After the first ring, t
Inhaltszusammenfassung zur Seite Nr. 20
KX-TCD725EM-1(02~23) 01.10.24 14:36 Page 20 Caller List Viewing the Caller List Information from up to 50 different callers is stored from the most recent call to the oldest call in the caller list. When the 51st call is received the oldest caller information is deleted. Each caller’s phone number and the date and time received are shown. If you receive a call from the same phone number you stored with name in the phonebook, the display will show the caller name also (p. 24). Make sure that th
