Inhaltszusammenfassung zur Seite Nr. 1
User Guide
BLUE COLOR LCD
DIGITAL CORDLESS PHONE
Model ME7158 Series
Digital 1.8 GHz
Inhaltszusammenfassung zur Seite Nr. 2
Congratulations on your purchase of a Motorola product! Your Motorola Telephone at a glance: Clock Display In use/Message Waiting/ Incoming Call Indicator 1 Welcome
Inhaltszusammenfassung zur Seite Nr. 3
For product-related questions, please refer to the Warranty section. Please retain your original dated sales receipt for your records. For warranty service of your Motorola Product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Complies with the essential protective requirements and objectives of the EC's R&TTE Directive 1999/5/EC; EC Low Voltage Directive 72/23/EEC; EC EMC Directive 89/336/EEC Copyright © 2006 Motorola, Inc. All rights reserved. No par
Inhaltszusammenfassung zur Seite Nr. 4
Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Navigating the Menu . . . . . . . . . . . . . . . .15 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Using the Telephone . . . . . . . . . . . . . . . . .16 Switching the Handset On / Off . . . . . . .16 Important Safety Instructions . . . . . . . . . .5 Making External Calls . . . . . . . . . . . . . . .16 Installation Guidelines . . . . . . . . . . . . . . . .6 Handset Range . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 5
Contents Phone Book Menu . . . . . . . . . . . . . . . . . .23 Switching Key Tones On/Off . . . . . . . . .41 Storing Entries . . . . . . . . . . . . . . . . . . . . .23 Switching Auto Answer On/Off . . . . . . . .42 Storing Number in standby mode . . . . .25 Giving the Handset a Name . . . . . . . . . .42 Searching Number in Phone Book . . . . .25 Selecting the LCD Mode . . . . . . . . . . . . . 43 Phone Book Groups . . . . . . . . . . . . . . . .26 Resetting your Handset to the Speed Dial Num
Inhaltszusammenfassung zur Seite Nr. 6
Important Safety Instructions Follow these safety precautions when using your cordless phone to reduce the risk of fire, electric shock and injury to persons or property: Reduce the risk of fire and shock by: 1. Keep all slits and openings of the phone unblocked. Do not set the phone on a heating register or over a radiator. Ensure that proper ventilation is provided at the installation site. 2. Do not use while wet or while standing in water. 3. Do not use this product near water (for example,
Inhaltszusammenfassung zur Seite Nr. 7
Unplug this cordless phone immediately from an outlet if : The power cord or plug is damaged or frayed. Liquid has been spilled into the product. The product has been exposed to rain or water. Do not retrieve the handset or base until after you have unplugged the power and phone from the wall. Then retrieve the unit by unplugged cords. The product has been dropped or the cabinet has been damaged. The product exhibits a distinct change in performance. Installation Guidelines 1. Read and understan
Inhaltszusammenfassung zur Seite Nr. 8
8. Use only the power supply that came with this unit. Using other power supplied may damage the unit. 9. Because cordless phones operate on electricity, you should have at least one phone in your home that isn't cordless, in case the power in your home goes off. 10. To avoid interference to nearby appliances, do not place the base of the cordless phone on or near a TV, microwave oven, or VCR. Technical Amendments These Operating Instructions are issued for information purposes. Their content is
Inhaltszusammenfassung zur Seite Nr. 9
Package Contents ME7158-1 ME7158-2 ME7158-3 ME7158-4 Single Pack Twin Pack Triple Pack Quad Pack Base station 1 1 1 1 Handset 1 2 3 4 Mains Adaptor 1 2 3 4 Telephone Line Cord 1 1 1 1 Rechargeable Batteries 2 4 6 8 (type AAA rechargeable) Charger Unit 0 1 2 3 User's Guide 1 1 1 1 Please check the contents of the package carefully. If something is missing or has become damaged in transit, you should NOT use the telephone. In such a case you should return to the dealer with your sales receipt or
Inhaltszusammenfassung zur Seite Nr. 10
Connecting the Base Station and Mains Adaptor 1. Thread the telephone cord and DC power cord through the gap at the bottom between the base and stand (as shown). 2. Insert the telephone line cord into the corresponding socket on the base station. 3. Thread the two cords through the slot at the bottom of the base. 4. Connect the mains power adaptor to the mains wall socket and switch the power on. 5. Connect the telephone line cord to the telephone
Inhaltszusammenfassung zur Seite Nr. 11
Connecting the Charger Unit Plug the mains adaptor into the wall socket . The charger unit is now ready to use. Preparing the Handset(s) Inserting and Charging the Batteries Open the battery compartment, by pushing downwards on the cover. Insert the 2 x AAA (600 mAh / 1.2V) Ni-MH re-chargeable batteries supplied, observing the correct polarity. CAUTION : PLEASE DO NOT USE ALKALINE OR NON- RECHARGEABLE BATTERIES. IT MAY CAUSE PERMANENT DAMAGE TO THE UNIT. AND VOID THE WARRANTY. If the batteries
Inhaltszusammenfassung zur Seite Nr. 12
LOW BATTERY WARNING If the handset batteries are low and need charging you will hear a beep every 30 seconds and the icon will be displayed. Attaching a Headset Note: A headset is not included as standard. You can connect a headset to your handset. Lift the small rubber flap on the right side of the handset to reveal the headset socket. Connect the jack plug into the jack socket. With a headset connected the handset microphone and receiver loudspeaker are switched off and all communication is v
Inhaltszusammenfassung zur Seite Nr. 13
Telephone Features Congratulations on your purchase of this high quality, cordless telephone set. The set offers the following features: Digital Enhanced Cordless Priority call alert Telecommunication (DECT) Message waiting alert 4 Grey Scale Colour display with icons Emergency call number 9 Speed dial numbers 10 Polyphonic ringtones Phone book for 80 names, each with 3 Separate ringtones for internal/ contact numbers external/group and page calls 5 Earpiece volume levels 3 Wallpapers (exclusi
Inhaltszusammenfassung zur Seite Nr. 14
Control Buttons 1 14 17 2 3 4 18 8 6 11 10 9 7 19 5 16 15 12 13 20 1. Display 8. OFF Key 13. #/Keypad Lock Key Use to end a call. Press to enter a hash. 2. Left Soft Key Shortcut key to lock/unlock the keypad Press to return to standby mode. Press from standby to view the menu Press and hold to switch the power on/off. 14. Clock display Press to select and confirm display items. Use to mute/unmute the microphone. 9. Pause/Voice Message Key 15. Charge LED When storing a number, press and
Inhaltszusammenfassung zur Seite Nr. 15
Display Icons Signal icon Flashes if the handset moves out of communication range with the base. Key lock icon Keypad lock is active. Line in use icon Indicates that the line is in use. Alarm icon Alarm is set. Ring icon External ring volume is set to on. Battery icon Shows the battery charge level. No ring icon External ring volume is set to off. No Line icon Base not connected with PSTN. Mic mute icon Microphone is muted. Message waiting icon Indicates that there is message waiting. Menu Icon
Inhaltszusammenfassung zur Seite Nr. 16
Menu Structure Handset settings Base settings Phone book 1. Search 1. Ring Type 1. Base Ring Tone 2. Ring Volume 2. Base Ring On/Off 2. Add 3. Ring On/Off 3. Priority Call Alert 3. Group 4. Speed Dial 4. Pre Fix 4. Dial Mode 5. Outgoing Call Bar 5. Register 5. Check 6. Emergency Call 6. Message Waiting 6. De-register 7. Area Code 7. Wallpaper 7. Select Base 8. Language 8. System PIN Call log 1. Missed call 9. Contrast 9. Flash Time 10. Key Tone 10. Default 2. Received call 11. Auto Answer 3. D
Inhaltszusammenfassung zur Seite Nr. 17
Using the Telephone Note: If the handset is in the base station or charger unit, only the key and key will function. Lift the handset out of the base station/charger unit for use. Switching the handset On/Off When the handset is put in the base station/charger unit it switches on automatically and charges up. Allow the batteries to charge for 16 hours without interruption before first use. To switch the handset off: 1. In ON mode, press and hold the key for 2 seconds. To switch the handset on
Inhaltszusammenfassung zur Seite Nr. 18
Direct dialling 1. Press the key and wait for the dialling tone. 2. Dial the telephone number and complete the call. When the call is connected, the call duration will be displayed and will remain in the display until 3 seconds after the call is ended. The call timer format is HH:MM:SS. 3. Press the key to end the call. On-hook dialling (pre-dialling) 1. Dial the telephone number. 2. Delete any incorrect digits by pressing the key. 3. Press the key. The displayed number is dialled. 4. To end th
Inhaltszusammenfassung zur Seite Nr. 19
During a call: 1. Press the key. To toggle between speakerphone mode on/off. 2. Place the handset back in the base station/charger unit. The call will disconnect and go back to standby status. 3. Press the key to end the call. Taking calls When an external call is received, all registered handsets ring and the LCD backlight will be on during ringing. The display shows Incoming call. The In-use / CID LED incoming call light on the base flashes. Note: If you have subscribed to caller ID, the ca
Inhaltszusammenfassung zur Seite Nr. 20
See page 37 for details on how to store a prefix number. Dialling from the Phone Book Note: To store a number in the Phone Book, see "Storing entries" on page 23. In standby mode: 1. Press the key to enter the phone book. Note: If the phonebook is empty, No Records will be displayed for 2 seconds. 2. The first entry in the phone book is displayed. Press the or key to display the entry you want. 3. Press the key to dial the number. Note: If the entry contains more than one number, press the SKL
