Inhaltszusammenfassung zur Seite Nr. 1
MD40 Series
Digital 2.4GHz
Expansion Handset Unit
Socle d'expansion pour combinés
User's Guide >
Guide de l'utilisateur >
031202o
Inhaltszusammenfassung zur Seite Nr. 2
MD450 Series Digital 2.4GHz Expandable Cordless Telephone System User's Guide > 031068o
Inhaltszusammenfassung zur Seite Nr. 3
Congratulations on your purchase of a Motorola product! Product registration helps us facilitate warranty service and permits us to contact you if your Motorola product requires an update or other service. To register your U.S. product online, visit: www.motorola.com/warranty/cordless Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Regist
Inhaltszusammenfassung zur Seite Nr. 4
Handset Controls Raise volume Scroll up or Lower volume down on display Left soft key Right soft key Turn handset on Turn handset off to make a call to hang up Earphone jack Talk handsfree Redial using speakerphone Use handset as intercom Microphone 2
Inhaltszusammenfassung zur Seite Nr. 5
FCC and Interference Information This equipment complies with Parts 15 and 68 of the FCC rules and the requirements adopted by the Administrative Council for Terminal Attachments (ACTA). A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular
Inhaltszusammenfassung zur Seite Nr. 6
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this cordless phone does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. Notice must be given to the telephone company upon permanent disconnection of your telephone from your line. The FCC requires that you connect your cordless telephone to the nationwide telephone netwo
Inhaltszusammenfassung zur Seite Nr. 7
2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the in
Inhaltszusammenfassung zur Seite Nr. 8
Hearing Aid Compatibility This telephone system meets the FCC standards for hearing aid compatibility. 6
Inhaltszusammenfassung zur Seite Nr. 9
Industry Canada (IC) Information This equipment meets the applicable Industry Canada (IC) radio and terminal equipment technical specifications. This is confirmed by the certification/registration number found on the label on the bottom of the base unit. The abbreviation IC before the certification/registration number only signifies that registration was performed based on a Declaration of Conformity and that the Industry Canada technical specifications were met. It does not imply that In
Inhaltszusammenfassung zur Seite Nr. 10
For your protection, ensure that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: You should not attempt to make such connections yourself. Contact the appropriate electrical inspection authority or an electrician, as appropriate. Note: If your home has specially wired alarm equipment connected to the telephone line, ens
Inhaltszusammenfassung zur Seite Nr. 11
2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Industry Canada’s ICES-003. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
Inhaltszusammenfassung zur Seite Nr. 12
Important Safety Instructions Follow these safety precautions when using your cordless phone to reduce the risk of fire, electric shock, and injury to persons or property: 1. Keep all slits and openings of the phone unblocked. Do not set the phone on a heating register or over a radiator. Ensure that proper ventilation is provided at the installation site. 2. Do not use while wet or while standing in water. 3. Do not use this product near water (for example, near a bath tub, kitchen sink,
Inhaltszusammenfassung zur Seite Nr. 13
The product has been exposed to rain or water. Do not retrieve the handset or base until after you have unplugged the power and phone from the wall. Then retrieve the unit by the unplugged cords. The product has been dropped or the cabinet has been damaged. The product exhibits a distinct change in performance. Installation Guidelines 1. Read and understand all instructions and save them for future reference. 2. Follow all warnings and instructions marked on the product. 3. Do not
Inhaltszusammenfassung zur Seite Nr. 14
Battery Safety Instructions Do not burn, disassemble, mutilate, or puncture the battery. The battery contains toxic materials that could be released, resulting in injury. Caution: There is a risk of explosion if you replace the battery with an incorrect battery type. Use only the battery that came with your phone or an authorized replacement recommended by the manufacturer. Keep batteries out of the reach of children. Remove batteries if storing over 30 days. Do not dispose of ba
Inhaltszusammenfassung zur Seite Nr. 15
Contents Handset Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FCC and Interference Information. . . . . . . . . . . . . . . . 3 Industry Canada (IC) Information . . . . . . . . . . . . . . . . 7 Important Safety Instructions . . . . . . . . . . . . . . . . . . 10 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Setting Up the Charging Bases . . . . . . . . . . . . . . . . . 14 Installing Batteries in the Handsets . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 16
Getting Started To set up your Motorola digital expansion handset: 1. Plug in charging bases for expansion handsets (page 14). 2. Install batteries in handsets (page 15). 3. Charge handset batteries (page 16). A rechargeable NiCd battery powers each handset. Charge the battery for about 12 hours before initial use. 4. Register expansion handsets to the base station (page 19). 5. Set the ring tone, date, time, and other features of your handset (page 20). Setting Up the Charging Bases Expans
Inhaltszusammenfassung zur Seite Nr. 17
Getting Started Installing Batteries in the Handsets Important: Before installing or handling batteries, read “Battery Safety Instructions” on page 12. 1. Remove the battery cover by pressing on the recess and sliding it down and off the handset. 2. Plug the connector into the receptacle. 3. Insert the battery into the compartment. 4. Slide and snap the battery cover back into place. Black Red 15
Inhaltszusammenfassung zur Seite Nr. 18
Charging the Handsets Place the handset in the charging base. The charging LED is solid red when the handset is charging. For the initial charge, charge the battery for at least 12 hours. charge 16 Getting Started
Inhaltszusammenfassung zur Seite Nr. 19
Getting Started Using the Handset Display When the handset is not in use, the display shows the standby screen. Time Date Battery meter Handset 04:26 PM 09/26 9 name Handset (1) 6Calls Number of Ringer off Caller ID ^ records PHONEBK MENU Left soft key function Right soft key function Note: Caller ID information is supplied only if you subscribe to caller ID service from your local phone company. When the handset speakerphone is on,V displays. 17
Inhaltszusammenfassung zur Seite Nr. 20
Using the Soft Keys The 2 soft keys are used to select the functions shown above them on the display. The functions change as you move from one screen to the next. In this guide, soft key functions are shown as the function name followed by a, for example, CHANGE (a). Left soft key Right soft key function function Left soft key Right soft key Using the Navigation Key c is used to scroll up and down through menu items, a list of settings, caller ID and redial lists, and the phonebook. On
