Inhaltszusammenfassung zur Seite Nr. 1
MPH7895
Congratulations on your selection of the MPH7895 from
®
Memorex . This quality 2.4GHz cordless telephone all Digital
Answering System with Call Waiting Caller ID, like all
®
Memorex products, has been designed to give you many
years of continuous service and represents the best value
for your money. It requires little maintenance and is easy to
setup and operate.
MPH7895/04281A(English).put Page 1 7/5/01, 4:07 PM Adobe PageMaker 6.5C/PPC
Inhaltszusammenfassung zur Seite Nr. 2
IMPORTANT SERVICE INFORMATION Read this manual before attempting to setup or use this instrument. It contains important information regarding safe installation and use. Keep this manual for future reference. Also save the carton, packing and proof of purchase to simplify and accelerate any needed action. If you need assistance or service, call 1-800-919-3647. You can also visit our web site at: http://www.memcorpinc.com for technical support and information on our other products. WARNING To pre
Inhaltszusammenfassung zur Seite Nr. 3
CARTON CONTENTS HANDSET BASE UNIT RECHARGEABLE Ni-Cd BATTERY PACK ADAPTER THLEPHONE LINE WALL MOUNT (AC9V, 500mA) CORD BRACKET (Short & Long) MPH7895 BELT CLIP USER’S MANUAL 2 MPH7895/04281A(English).put Page 3 7/5/01, 4:07 PM Adobe PageMaker 6.5C/PPC
Inhaltszusammenfassung zur Seite Nr. 4
SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be fol- lowed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use t
Inhaltszusammenfassung zur Seite Nr. 5
SAVE THESE INSTRUCTIONS BATTERY SAFETY INSTRUCTIONS CAUTION: To reduce the risk of fire or injury to persons, read and follow these instructions: 1. Use only the following type and size of handset battery pack: Cordless Telephone Battery Pack DC3.6V, 800mAh, Ni-Cd Battery Pack 2. Do not dispose of the battery in a fire. The cell may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the battery. Released electrolyte is corrosive and may
Inhaltszusammenfassung zur Seite Nr. 6
FCC NOTICE The FCC requires that you be advised of certain requirements involving the use of this telephone. 1. This telephone is Hearing Aid Compatible. 2. This equipment complies with Part 68 of the FCC rules. On the bottom of this equipment is a label that contains, among other information, the FCC registration number and Ringer Equivalence Number (REN) for this equipment. If requested, provide this information to your telephone company. 3. The REN is useful to determine the quantity of devic
Inhaltszusammenfassung zur Seite Nr. 7
TABLE OF CONTENTS IMPORTANT SERVICE INFORMATION.............................................................................1 CARTON CONTENTS.........................................................................................................2 IMPORTANT SAFETY INSTRUCTIONS.............................................................................3 BATTERY SAFETY INSTRUCTION....................................................................................4 INSTALLATION PRECAUTIONS........
Inhaltszusammenfassung zur Seite Nr. 8
PROGRAMMING MODE...........................................................................................24 NEW CALL / MESSAGE INDICATOR.......................................................................25 TALKING TIME AND CHANNEL DISPLAY...............................................................25 CALL WAITING ID OPERATION...............................................................................25 LCD DISPLAY SYMBOLS AND MESSAGES...................................................
Inhaltszusammenfassung zur Seite Nr. 9
7. (-) Button: Allows you to enter to your Call Record list. It is also used to scroll down in Call Record list, memory and program mode. 8. RE/PA (Redial / Pause) Button: Automatically dials the last number called up to 31 digits. Also used to insert a 4 second delay between dialed numbers. 9. Charge Contacts: Used for charging the handset battery. 10. Microphone: Used for speaking with callers or recording Outgoing Message (OGM) and Memo message(s) remotely. 11. VOL (Volume) / (Shift Left ) Bu
Inhaltszusammenfassung zur Seite Nr. 10
12. HELP Button: Press to access voice help menu. 13. SKIP Button: Press to skip to the next message during playback. 14. ANS. ON Button: Press to activate answer function. 15. MEMO PLAY Button: Press to playback Memo message(s). 16. TIME / DAY Button: Press to set the day and time stamp. BASE UNIT (Rear View) 20 19 18 12 17 16 BASE UNIT BASE UNIT (Bottom View) 15 (Side View) 14 12,13 10,11 9 8 5 4 3 7 6 (Figure 3) BASE UNIT CONTROLS 1. 9VAC Adapter Jack: A jack located on the rear side of the b
Inhaltszusammenfassung zur Seite Nr. 11
16. MEMO LED Indicator: Lights up to indicate the presence of Memo message and blinks if there are new Memo message(s). 17. MSG LED Indicator: Lights up to indicate the presence of Incoming Message (ICM) and Two-Way Recordings. Blinks if there are new Incoming Message(s) (ICM) or Two- Way Recording(s). 18. CHG (Charge) / IN USE LED Indicator: Lights up steadily when the phone is being used and when the handset is being charged on the base . 19. Digital LED Display: A two-digit LED display to in
Inhaltszusammenfassung zur Seite Nr. 12
B. WALL MOUNTING (No Standard Wall Jack) 1. Drill two holes with a vertical distance between the two marked 3 15/16” positions of 3 15/16" (100 mm) as shown in Figure 6. (100 mm) 2. Drive a screw into each of the holes. Tighten them to the end of the screw line, only leaving the smooth part of the screw head outside the wall. 3. Hang the unit onto the screws, then slide it down firmly to (Figure 6) fasten the base securely. BELT CLIP INSTRUCTION Clamp the belt clip at the back of the handset as
Inhaltszusammenfassung zur Seite Nr. 13
Telephone Modular Jack 9VAC Adapter AC Outlet AC Plug Line Cord 9VAC Adapter Jack (Figure 9) HANDSET BATTERY INSTALLATION CAUTION: Use only the Nickel Cadmium (Ni-Cd) battery type included with this unit. Use of other battery types may cause injuries or damage. 1. Remove the battery compartment cover of the handset. Connect the rechargeable Ni-Cd battery as shown in Figure 10. Handset Insert the End of the Battery Battery Pack Wire Compartment BLACK Wire RED Wire (Figure 10) 2. Insert the Ni-Cd
Inhaltszusammenfassung zur Seite Nr. 14
7. After two beeps, press 1 for AM, or press 2 for PM. The unit will announce the new day and time followed by a long beep and will prompt "Please enter next command." 8. Press the REMOTE button to exit the remote mode. Otherwise, the remote function will turn off automatically if not in use for 8 seconds. TONE / PULSE SETTING Select the appropriate dialing service by moving the T / P (Tone / Pulse) switch on the bottom of the base unit: T / P • • • • • (T) TONE for Tone service, or (Figure 12)
Inhaltszusammenfassung zur Seite Nr. 15
B. IF THE HANDSET IS OUT OF THE BASE UNIT 1. When the phone rings, press the TALK button on the handset. 2. Start your conversation. 3. When finished with your call, either press the TALK button or place the handset on the base unit. LAST NUMBER REDIAL A. AFTER HEARING A BUSY TONE WHEN PLACING A CALL 1. If you get a busy tone, press handset TALK button to hang up. 2. Press the handset TALK button again and listen for a dial tone. (Figure 15) 3. Press the handset RE/PA button. This will automat
Inhaltszusammenfassung zur Seite Nr. 16
(Space) Press button two times 1 Press 1 four times 5. Press handset MEMO button to store the name field. The cursor or marker moves to the telephone number line entry. 6. Enter the telephone number you want to store. You can enter up to 24 digits. If you make a mistake, press button to delete the character on the left of the cursor. 7. Press handset MEMO button to save and exit. But if you want to register more memory, you can press (+) or (-) button instead of handset MEMO button. B. STORING
Inhaltszusammenfassung zur Seite Nr. 17
4. Follow steps 4-7 as described in the section Storing Telephone Numbers Into Memory to overwrite the selected entry. MIXED MODE DIALING (Temporary Pulse to Tone Dialing) 1. If you only have pulse (rotary dialing) service in your area and want to access Tone services (Bank by Phone, etc.), ensure that the T / P (Tone / Pulse) switch is set to the Pulse position. 2. Press the TONE ( * ) button once to switch from Pulse to Tone dialing temporarily. Pulse dialing mode resumes when the call is ende
Inhaltszusammenfassung zur Seite Nr. 18
ANSWERING MACHINE OPERATION The unit features a sophisticated Digital Answering System. Incoming Messages (ICMs), Outgoing Message (OGM) and Memo messages are stored electronically into digital memory. Messages are accessed instantly and arranged compactly in this memory. The unit can store 15 minutes of messages (ICMs, OGM and Memos combined). NOTE: The maximum Incoming Message (ICM) recording time is 2 minutes. VOICE MENU SYSTEM A sophisticated Voice Menu System has been designed and pre-progr
Inhaltszusammenfassung zur Seite Nr. 19
2. Press REC OGM button. The unit will prompt "Please record your announcement after the beep. To stop, press star(*)." 3. After hearing a long beep, begin your announcement. 4. Press star (*) to stop recording and the MPH7895 will (Figure 19) playback once automatically for your review. 5. Press REMOTE button to exit the remote mode. Otherwise, the unit will automatically turn off if not in use for 8 seconds. CHECKING THE OGM 1. In standby mode, press the OGM PLAY button on the (Figure 20) bas
Inhaltszusammenfassung zur Seite Nr. 20
B. ERASING ALL ICM AND TWO-WAY RECORDINGS 1. In standby mode, press and hold the ERASE button for about 2 seconds. 2. The unit will announce "Message (number) erased. You have no message." C. ERASING ALL MEMO MESSAGES 1. In standby mode, press the ERASE button briefly for less than 2 seconds and press and hold MEMO button for about 2 seconds. 2. The unit will announce "Message erased. You have no Memo message". (Figure 25) D. ERASING OGM 1. During OGM playback, press ERASE button. 2. The unit
