Inhaltszusammenfassung zur Seite Nr. 1
MPH2430.O/M.QXD 1/29/03 9:12 AM Page 50
CORDLESS TELEPHONE WITH DIGITAL
ANSWERING MACHINE
MODEL: MPH2430
BEFORE OPERATING THIS PRODUCT,
PLEASE READ THESE INSTRUCTIONS COMPLETELY.
OPERATING INSTRUCTIONS
Inhaltszusammenfassung zur Seite Nr. 2
MPH2430.O/M.QXD 1/29/03 9:11 AM Page 1 IMPORTANT SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ATTENTION The Owner’s Manual contains important operating and maintenance instructions. For your safety, it is necessary to refer to the manual. Warning: Changes or modifications to this unit not expressly approved by the part
Inhaltszusammenfassung zur Seite Nr. 3
MPH2430.O/M.QXD 1/29/03 9:11 AM Page 2 IMPORTANT SAFETY PRECAUTIONS (CONTINUED) When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on this product. 3. Do not use this product near water- for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or n
Inhaltszusammenfassung zur Seite Nr. 4
MPH2430.O/M.QXD 1/29/03 9:11 AM Page 3 IMPORTANT SAFETY PRECAUTIONS (CONTINUED) 1. If your local telephone exchange only accepts Pulse dialing, you may have to switch the Tone/Pulse switch to Tone to access certain services that require Tone signalling (such as home banking). After the initial line is connected to the number you are calling, switch the Tone/Pulse switch to Tone to access Tone signalling. When you have completed your call, please switch the Tone/Pulse switch back to Pulse. 2.
Inhaltszusammenfassung zur Seite Nr. 5
MPH2430.O/M.QXD 1/29/03 9:11 AM Page 4 CONTENTS Important Safety Precautions ........................1 Character Map Chart...............................30 Contents ........................................................4 Viewing the Phonebook...........................30 Location of Controls and Indicators ...............5 Saving Caller ID Information to Installation Instructions ..................................7 the Phonebook ........................................31 Wall Mounting the
Inhaltszusammenfassung zur Seite Nr. 6
MPH2430.O/M.QXD 1/29/03 9:11 AM Page 5 LOCATION OF CONTROLS AND INDICATORS HANDSET BASE 1 17 30 18 31 19 32 2 20 11 33 21 34 35 3 22 36 23 37 24 38 25 39 26 4 12 27 40 5 28 6 13 29 41 42 14 7 8 9 15 10 16 1. Antenna 22. Mailbox 1 Button/Indicator 2. NEW CALL/MSG WTG Indicator 23. Charging Contacts 3. Display 24. Mailbox 3 Button/Indicator 4. TALK Button 25. ANS (Answer) ON/OFF Indicator 5. Scroll Up/Down/Left/Right Buttons 26. SET Button 6. VOICE MAIL/MENU Button 27. IN USE Indicator 7. Key B
Inhaltszusammenfassung zur Seite Nr. 7
MPH2430.O/M.QXD 1/29/03 9:11 AM Page 6 LOCATION OF CONTROLS AND INDICATORS (CONTINUED) BASE - REAR 44 43 45 BASE - SIDE 46 47 49 48 50 43. RESET Button 44. DC 9V Jack 45. Telephone LINE jack 46. RING SELECT Switch 47. RINGER ON/OFF Switch 48. MSSG (Message) ALERT Switch 49. TONE/PULSE Switch 50. ANNC (Announce Only)/ICM (Incoming Message) Switch 6
Inhaltszusammenfassung zur Seite Nr. 8
MPH2430.O/M.QXD 1/29/03 9:11 AM Page 7 INSTALLATION INSTRUCTIONS 1. Carefully unpack and remove your unit from the box. 2. Make sure all of the following items have been included: • Base Unit • AC Adapter • Handset Unit (AC120V, 60Hz/DC9V, 500mA) • Rechargeable Ni-Cd Battery Pack • Telephone Cord (3.6V, 600mAH) • Belt Clip 3. Make sure the Rechargeable Battery is installed or install the Rechargeable Battery as described on page 10. PLEASE REFER TO FIGURE 1 FOR STEPS 4 THROUGH 7: Base AC Out
Inhaltszusammenfassung zur Seite Nr. 9
MPH2430.O/M.QXD 1/29/03 9:11 AM Page 8 INSTALLATION INSTRUCTIONS (CONTINUED) WALL MOUNTING THE UNIT (STANDARD WALL JACK) Follow the instructions below to install the base onto a standard telephone wall jack: 1. Connect the short telephone line cord to the TEL LINE jack on the rear of the base unit. 2. Insert the free end of the short line cord through the hole of the mounting bracket. 3. Insert the hooks of the mounting bracket into the matching slots on the back of the unit as shown in Figu
Inhaltszusammenfassung zur Seite Nr. 10
MPH2430.O/M.QXD 1/29/03 9:11 AM Page 9 INSTALLATION INSTRUCTIONS (CONTINUED) WALL MOUNTING THE UNIT (NO STANDARD WALL JACK) 1. Drill two holes with a vertical distance between the two marked positions of 3 15/16" (100mm). 2. Drive a screw into each of the holes. Tighten them to the end of the screw lines, only leaving the smooth part of the screw head outside the wall. 3. Install the wall mount bracket into the base unit as previously discussed in Figures 3-6 on the previous page. Screws 4.
Inhaltszusammenfassung zur Seite Nr. 11
MPH2430.O/M.QXD 1/29/03 9:11 AM Page 10 INSTALLATION INSTRUCTIONS (CONTINUED) INSTALLATION OF THE RECHARGEABLE BATTERY 1 2 Battery Compartment Red Wire N-Cad Battery Pack Black Wire Battery Connector Remove the battery cover located on Connect the Ni-Cd battery pack plug the rear of the handset by pressing on into the battery connector; the LCD the top cover and sliding it downward. display will turn on in the Standby mode. Insert the Ni-Cd battery pack into the battery compartment. 3 P
Inhaltszusammenfassung zur Seite Nr. 12
MPH2430.O/M.QXD 1/29/03 9:11 AM Page 11 SET-UP INSTRUCTIONS SETTING THE RINGER VOLUME Set the ringer volume (HI, LOW, OFF) while in the Standby mode as follows: 1 2 Press and hold the VOICE MAIL/ Press the EDIT/FLASH button to MENU button for more than two change the setting; the Ringer Volume seconds; the Ringer Volume setting setting will blink. will appear in the display. 3 4 1 2 Press the Scroll Up ❶ or Down ❷ When the desired Ringer Volume setting appears, press and hold the button to se
Inhaltszusammenfassung zur Seite Nr. 13
MPH2430.O/M.QXD 1/29/03 9:11 AM Page 12 SET-UP INSTRUCTIONS (CONTINUED) SETTING THE LANGUAGE Set the language (ENGLISH, SPANISH, FRENCH) as follows: 1 2 1 2 Press and hold the VOICE MAIL/ Press the Scroll Down button ❶ once MENU button for more than two or the 2 key button ❷ once; the seconds; the Ringer Volume setting Language setting will appear. will appear in the display. 3 4 1 2 Press the EDIT/FLASH button to Press the Scroll Up ❶ or Down ❷ change the setting; the Language button to sele
Inhaltszusammenfassung zur Seite Nr. 14
MPH2430.O/M.QXD 1/29/03 9:11 AM Page 13 SET-UP INSTRUCTIONS (CONTINUED) SETTING THE FIRST RING This feature will turn the first ring of the phone On or Off. Set to Off so the phone does not ring until the Caller ID information has been displayed. Turn the first ring option On or Off as follows: 1 2 1 2 Press and hold the VOICE MAIL/ Press the Scroll Down button ❶ twice MENU button for more than two or the 3 key button ❷ ; the First Ring seconds; the Ringer Volume setting will appear. will app
Inhaltszusammenfassung zur Seite Nr. 15
MPH2430.O/M.QXD 1/29/03 9:12 AM Page 14 SET-UP INSTRUCTIONS (CONTINUED) SETTING THE TIME AND DATE Change the Time and Date as follows: 1 2 1 2 Press and hold the VOICE MAIL/ Press the Scroll Down button ❶ three MENU button for more than two times or the 4 key button ❷ ; the Time seconds; the Ringer Volume setting Setting will appear. will appear in the display. 3 4 Press the EDIT/FLASH button to Set the month using the Key buttons change the setting; the month setting (0-9). Repeat this step
Inhaltszusammenfassung zur Seite Nr. 16
MPH2430.O/M.QXD 1/29/03 9:12 AM Page 15 SET-UP INSTRUCTIONS (CONTINUED) SETTING THE LCD CONTRAST If you find the LCD screen difficult to read, set the contrast level as follows: 1 2 1 2 Press and hold the VOICE MAIL/ Press the Scroll Down button ❶ four MENU button for more than two times or the 5 key button ❷ ; the seconds; the Ringer Volume setting Contrast setting will appear. will appear in the display. 3 4 1 2 Press the EDIT/FLASH button to Press the Scroll Up ❶ or Down ❷ change the setti
Inhaltszusammenfassung zur Seite Nr. 17
MPH2430.O/M.QXD 1/29/03 9:12 AM Page 16 SET-UP INSTRUCTIONS (CONTINUED) SETTING THE PBX NUMBER This feature will insert a number (0-9) before the outgoing number, if required. When a number is selected, the unit will automatically dial the preset PBX number and a pause before any speed dial or Caller ID callback. Set the PBX number as follows: 1 2 1 2 Press and hold the VOICE MAIL/ Press the Scroll Down button ❶ five MENU button for more than two times or the 6 key button ❷ once; the seconds;
Inhaltszusammenfassung zur Seite Nr. 18
MPH2430.O/M.QXD 1/29/03 9:12 AM Page 17 SET-UP INSTRUCTIONS (CONTINUED) SETTING THE FLASH TIME This unit enables you to select the standard flash time applicable to your calling area, which is useful when “clicking” over to a call waiting call or for PBX systems. If you are not sure of the flash time, call your local telephone company. Set the Flash Time as follows: 1 2 1 2 Press and hold the VOICE MAIL/ Press the Scroll Down button ❶ six MENU button for more than two times or the 7 key butto
Inhaltszusammenfassung zur Seite Nr. 19
MPH2430.O/M.QXD 1/29/03 9:12 AM Page 18 SET-UP INSTRUCTIONS (CONTINUED) SETTING THE PAUSE TIME This unit enables you to change the number of seconds that a pause lasts when using programmed pauses in your speed dial numbers or after your PBX number. Set the Pause Time as follows: 1 2 1 2 Press and hold the VOICE MAIL/ Press the Scroll Down button ❶ seven MENU button for more than two times or the 8 key button ❷ ; the Pause seconds; the Ringer Volume setting Time setting will appear. will appe
Inhaltszusammenfassung zur Seite Nr. 20
MPH2430.O/M.QXD 1/29/03 9:12 AM Page 19 SET-UP INSTRUCTIONS (CONTINUED) SETTING THE VOICE MAIL This unit enables you to store the Voice Mail Post Code number in your area. This will automatically connect you to the Voice mail server provider with one touch dialing. Set the Voice Mail setting as follows: 1 2 1 2 Press and hold the VOICE MAIL/ Press the Scroll Down button ❶ eight MENU button for more than two times or the 9 key button ❷ ; the Voice seconds; the Ringer Volume setting Mail settin
