Inhaltszusammenfassung zur Seite Nr. 1
TM
4 Line
Multi-Handset Office System
User’s Guide
Please read this manual before
operating this product for the first time.
Model 25450
Inhaltszusammenfassung zur Seite Nr. 2
Important Information Important Information Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regu- lations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) fo
Inhaltszusammenfassung zur Seite Nr. 3
Important Information Interference Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are de- signed to provide re
Inhaltszusammenfassung zur Seite Nr. 4
Important Information FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.” For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when us
Inhaltszusammenfassung zur Seite Nr. 5
Introduction Introduction CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. Congratulations on your purchase of the RCA 25450 Telephone System. The RCA 25450 Telephone System was built to satisfy a variety of business and residential needs. A prominent feature of the RCA 25450 is the two-way radio which gives you the flexibility
Inhaltszusammenfassung zur Seite Nr. 6
Table of Contents Soft BonS utt ......................................................................................................19 Iantmport IItnforma on .............................................................................2 Menu S S y M te ...................................................................................................19 EquIpmEnt a pproval IItnforma on ..............................................................2 r edial Bonutt ...............................
Inhaltszusammenfassung zur Seite Nr. 7
Table of Contents c ordleSS HandSet c HarGinG c radle l outya ....................................................26 PuttinG c all (S) on Hold ...................................................................................39 e nd /Power Bonutt ............................................................................................27 Mute ...................................................................................................................40 t alk Bonutt .....................
Inhaltszusammenfassung zur Seite Nr. 8
Table of Contents General Product c are ....................................................................................116 s EItt ngs and a J d E ustm nt ........................................................................87 c S au S e of Poor r ecePtion ...............................................................................116 Menu SySteM .....................................................................................................87 i nterference i nforMtiona ..........
Inhaltszusammenfassung zur Seite Nr. 9
Connections and Setup Important Installation Information Safety Precautions • Neverinstall telephone wiring during a lightningstorm. • Never installtelephone jacksin wet locations unless the jack is specificallydesigned forwet locations. • Never touch non-insulated telephone wires or terminals,unless the telephoneline is disconnected from the network. • Use cautionwhen installing or modifying telephone lines. •T emporarily disconnectany equipment connected to the
Inhaltszusammenfassung zur Seite Nr. 10
Connections and Setup Telephone Jack Requirements To use this phone, the user will need either two RJ14 (two line) or four RJ11 (one line) modular jacks in order to supply this unit with 4 phone lines. The modular jacks which may look like the one shown here. If you don’t have a modular jack, call your local phone company to find out how to get one installed. Modular telephone line jack 10
Inhaltszusammenfassung zur Seite Nr. 11
Connections and Setup Parts Checklist (Base Unit) Make sure your package includes the following items: Handset Cord Charger/AC Adapter Battery Pack Handset Base Battery Compartment Cover Line Cords (4) 11
Inhaltszusammenfassung zur Seite Nr. 12
Connections and Setup Parts Checklist (Cordless Handset) Make sure your package includes the following items: Belt Clip Charging Cradle REDIA L M EN U Base Charger/AC Adapter Charging Cradle Bracket Cordless Handset Battery Pack Battery Compartment Cover 1
Inhaltszusammenfassung zur Seite Nr. 13
Connections and Setup Phone Installation (Base Unit) Base Unit Location Place your phone on a level surface, such as a tabletop or desk, near an electrical outlet and telephone wall jack. For the best performance, place the base unit at least 3 feet away from other electronic devices such as a computer or a fax machine. Raise the antenna after the installation is complete. Black Wire Installing Backup Battery The backup battery can provide 30 minutes of normal operation in the event of a pow
Inhaltszusammenfassung zur Seite Nr. 14
Connections and Setup Installing the AC Adaptor Plug the transformer end of the Base Unit AC adaptor (7.5VDC) into a standard AC electrical power outlet, plug the other end into the “Power 7.5VDC ” jack on the back of the Base Unit. Connecting the Telephone Line Cords Two 2-line Wall Jacks (Type RJ-14) Base Unit 1. Plug one end of a straight telephone line cord into the jack on the base labeled as “L2/L1” and the other end into the two-line wall jack you are using for lines 1 and 2. 2. Plug
Inhaltszusammenfassung zur Seite Nr. 15
Connections and Setup Four 1-line Jacks Two 2-line Jacks (Using 4-Wire Line Cords Supplied) L4/Data L4/L3 L2 L2/L1 L4/Data L4/L3 L2 L2/L1 Line Line Line Line Line 3 Line 1 4 3 2 1 Line 4 Line 2 1
Inhaltszusammenfassung zur Seite Nr. 16
Connections and Setup Cordless Handset Installation Cradle Installing the Charging Cradle and AC Adaptor Plug the transformer end of the AC Adaptor into a standard AC electric power out- let, plug the other end into the “Power 5.5VDC In” jack on the back of the Charging Cradle. Installing the Cordless Handset Battery 1. Locate the back cover and battery pack packaged separately from the Handset. 2. Insert the battery pack and connect the plug on the battery pack to the jack inside the compartm
Inhaltszusammenfassung zur Seite Nr. 17
Connections and Setup Installing the Charging Cradle Wall Mount Choose a mounting location at least 10-1/2” clearance above the top screw hole. 1. Cut out the Charging Cradle Wall Mount Template. See page 121. 2. Hold the template against the wall and mark the mounting screw positions. Insert tabs here 3. Drill holes in wall using appropriate size drill bit. 4. Insert anchor screws into the wall. We recommend #8 pan head screws. Allow 3/16” space between screw heads and wall. Leave 3" from h
Inhaltszusammenfassung zur Seite Nr. 18
Features Base Unit Layout LCD Display Auto Att Lines Voice Mail Lines Voice Mail Auto Attendant Soft Soft DND Store Memory Button Button Buttons Intercom Exit Dial Buttons Line Buttons Handset Page Keypad Headset Flash Speaker Redial Mute Hold Navigation Button Microphone Volume + - / Directory-DIR / Caller-ID 1
Inhaltszusammenfassung zur Seite Nr. 19
Features Base Unit Features Display shown in Standby Mode (Thephone is not handlingcalls or being programmed) LCD Display The Display shows several functions and menu items of the phone system. Backup Voice Mail Auto Attendant Battery Indicators Indicators Status The first line of the display can show the Auto Attendant and Voice mail ON/OFF indicators and backup battery status, or Caller ID, date and time, or messages. L1 L2 L3 L4 L1 L2 L3 L4 The second and third lines ca
Inhaltszusammenfassung zur Seite Nr. 20
Features Redial Button Allows you to dial the last ten (10) numbers called. You can use the Navigation But- ton up/down arrows to scroll through the last 10 numbers dialed. Line Buttons (4) Four line buttons are available. Dual-colored lights in each Line button indicate: • Line is idle (lightoff) • Base Unit isringing (flashing green quickly) • Cordless Handset is ringing (flashing red quickly) • Base Unit is on hold (flashing green slowly) • Cordless Handset is holding a call (flashing re
