Inhaltszusammenfassung zur Seite Nr. 1
User’s manual
TL76008
5.8 GHz expansion handset
for use with AT&T model
TL76108
Inhaltszusammenfassung zur Seite Nr. 2
Congratulations on your purchase of this AT&T product. Please read this user’s manual for the information necessary to install your new AT&T product. For complete instructions, please refer to the manual provided with your TL76108 telephone. For customer service or product information, please visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Model #: TL76008 Type: 5.8 GHz expansion handset Serial #: (found on t
Inhaltszusammenfassung zur Seite Nr. 3
Parts checklist Save your sales receipt and original packaging in case it is necessary to ship your telephone for warranty service. Your telephone package contains the following items. User’s manual TL76008 5.8 GHz expansion handset for use with AT&T model TL76108 Charger for cordless User's manual Cordless handset handset with power adapter installed BATTERY PACK 89-1324-00-00 MODEL 102 Battery Belt clip for Battery for cordless compartment cordless handset handset cover
Inhaltszusammenfassung zur Seite Nr. 4
User’s manual TL76008 5.8 GHz expansion handset for use with AT&T model TL76108 Table of contents Getting started Appendix A, Quick reference guide ...............2 Maintenance ..........................13 Installation preparation .............4 Appendix B, Important Charger installation .....................5 safety information ..............14 Battery installation & Appendix C, FCC Part 68 charging ......................................6 and ACTA ...
Inhaltszusammenfassung zur Seite Nr. 5
Getting started Quick reference guide New message indicator Flashes when there is a new message in the mailbox. Softkeys Press to select an item displayed above the key. LINE1/FLASH, OFF/CLEAR LINE2/FLASH During a call, press to Press LINE1/FLASH hang up. to make or answer a While using menus, press call on line 1. During a to cancel an operation, call, press to receive an incoming call on line 1 if back up to the previous call waiting is activated. menu, or exit the menu display
Inhaltszusammenfassung zur Seite Nr. 6
Getting started Quick reference guide Feature menu Caller ID Feature menu HANDSET I DIRECTORY RDL MENU CID MAILBOXES SETUP HANDSET REGISTER Redial SETUP HANDSET RINGERS LOW BATT TONE KEYPAD TONE CONTRAST RENAME For complete instructions, please refer to the user’s manual. If you are unable to find your manual, please visit www.telephones.att.com to read and/or download the manual. 3
Inhaltszusammenfassung zur Seite Nr. 7
Getting started Installation preparation You must install and See pages 6-7 charge the battery STOP! for easy instructions. before using the telephone. Your product may be shipped with a protective sticker covering the handset display - remove it before use. For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Avoid placing the telephone base too close to: • Communication devices such as: telev
Inhaltszusammenfassung zur Seite Nr. 8
Getting started Charger installation Plug the power adapter into an electrical outlet not controlled by a wall switch. IMPORTANT INFORMATION 1. Use only the power adapter(s) supplied with this product. To order a replacement power adapter, visit our website at www.telephones.att.com, or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. 2. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug
Inhaltszusammenfassung zur Seite Nr. 9
Getting started Handset battery installation & charging Install the battery as shown below. After installing the battery, you can make and receive short calls, but replace the handset in the telephone base or charger when the handset is not being used. For optimal performance, charge the handset battery for at least 16 hours before use. When fully charged, the handset battery provides up to approximately eight hours of talk time or four days of standby time. Step 1 Step 2 Step 3 Press t
Inhaltszusammenfassung zur Seite Nr. 10
Getting started Handset battery installation & charging Step 4 Charge the handset by placing it facing the front in the charger. The CHARGE light will be on when the handset is charging. IMPORTANT INFORMATION Use only the battery supplied with this product. To order a replacement or spare battery (AT&T model 102, part number 89-1324-00-00) or equivalent, visit our website at www.telephones.att.com, or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. 7
Inhaltszusammenfassung zur Seite Nr. 11
Getting started Adding & registering handsets Before using a new TL76008 handset, you must register it with the TL76108 telephone base (purchased separately). The TL76108 telephone can accommodate up to eight cordless handsets. The handset provided with your TL76108 is automatically registered as handset 1. Additional handsets will be assigned numbers in the order they are registered (handset 2, handset 3, and handset 4 etc.). You can register a maximum of eight handsets. When first purcha
Inhaltszusammenfassung zur Seite Nr. 12
Getting started Adding & registering handsets To register a handset to your telephone base Make sure the handset battery is installed and charged properly. Y You ha ou hav ve t e to ent o enter er a a 15-digit telephone base ID to register the BASE handset to the telephone base. RDL MENU CID To find the telephone base ID and register the handset: MENU softkey 1. On the telephone base, press the MENU DIRECTORY softkey when in idle mode to enter the MAILBOXES SETUP BASE feature menu. Press
Inhaltszusammenfassung zur Seite Nr. 13
Getting started Replacing a handset You may need to de-register your handsets if: You have eight registered handsets and need to replace a handset. -OR- You wish to change the designated handset numbers of your registered handsets. You must first de-register ALL the handsets, and then re-register each handset you wish to use. Please read carefully through all the instructions on this page before beginning the de-registration process. To de-register all handsets You can de-register all hand
Inhaltszusammenfassung zur Seite Nr. 14
Getting started Replacing a handset To de-register all handsets 5. All handsets will display NO BASE SUBSCRIPTION and ENTER BASE ID on the screen alternatively when de- registration is successful. 6. To re-register the handset(s) to the telephone base, follow the registration instructions on page 9. NOTE: If the de-registration process is not suc- cessful, please try again. 11
Inhaltszusammenfassung zur Seite Nr. 15
Getting started Belt clip & optional headset Installation Removal Snap the belt clip Gently lift either of into the retaining the belt clip retaining tabs on both sides tabs, shown in the of the handset as figure, outwards to shown in the remove the belt clip figure. from the handset. For handsfree telephone conversations, you can use any industry standard 2.5 mm headset (purchased separately). For best result, use an AT&T 2.5 mm headset. To purchase a headset, visit visit our our websi
Inhaltszusammenfassung zur Seite Nr. 16
Appendix A Maintenance Taking care of your telephone • Your cordless telephone contains sophisticated electronic parts, so it must be treated with care. • Avoid rough treatment. • Place the handset down gently. • Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water • Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or
Inhaltszusammenfassung zur Seite Nr. 17
Appendix B Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information • Read and understand all instructions in the user’s manual. Observe all markings on the product. • Avoid using a telephone during a thunderstorm. There may be a slight chance of electric shock from lig
Inhaltszusammenfassung zur Seite Nr. 18
Appendix B Important safety information • Replace batteries only as described in your user’s manual. Do not burn or puncture batteries — they contain caustic chemicals. • This power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling or an under-the-table/cabinet outlet. Caution: Use only the power adapter provided with this product. To obtain a replacement, visit our web
Inhaltszusammenfassung zur Seite Nr. 19
Appendix B Important safety information • Rechargeable batteries: This product contains either nickel- cadmium or nickel-metal hydride rechargeable batteries. Exer- cise care in handling batteries in order not to create a short circuit with conductive material such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm. Observe proper polarity between the battery and the battery charger. • Nickel-metal-hydride rechargeable batteries: Dispose of these batteries
Inhaltszusammenfassung zur Seite Nr. 20
Appendix B Important safety information PACEMAKER PATIENTS • Should keep wireless telephones at least six inches from the pacemaker. • Should NOT place wireless telephones directly over the pace- maker, such as in a breast pocket, when it is turned ON. • Should use the wireless telephone at the ear opposite the pacemaker. WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless telephones. SAVE THESE INSTRUCTIONS 17
