Inhaltszusammenfassung zur Seite Nr. 1
User’s manual
AT&T SB67108
DECT 6.0 expansion handset
for use with AT&T model
SB67118
Inhaltszusammenfassung zur Seite Nr. 2
Getting started Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information on pages 70-72 of this manual. Please thoroughly read this user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (888) 915-2007. In Canada, dial 1 (866) 288-4268. Model #: SB6
Inhaltszusammenfassung zur Seite Nr. 3
Parts checklist Check to make sure the telephone package includes the following items: User’s manual Quick start guide AT&T SB67108 AT&T SB67108 DECT 6.0 expansion handset DECT 6.0 expansion handset for use with AT&T model for use with AT&T model SB67118 SB67118 User's manual Quick start guide Cordless handset Battery Belt clip for Battery for cordless compartment cordless handset handset cover Charger for cordless handset with power adapter installed
Inhaltszusammenfassung zur Seite Nr. 4
User’s manual AT&T SB67108 DECT 6.0 expansion handset for use with AT&T model SB67118 Table of contents Screen icons, indicator tones Getting started and lights ........................................19 Quick reference guide ....................1 Mailbox setup .................................... 20 Installation .............................................3 Handset mailbox overview .....20 Charger installation ..........................4 Fast answer mode on Handset battery installation
Inhaltszusammenfassung zur Seite Nr. 5
Volume control .............................29 Store a flash in Call waiting ....................................29 a directory number ....................46 Call privacy ....................................29 Review directory .............................. 47 Recording a call ...........................30 Review directory entries ..........47 Mute ...................................................31 Search directory............................... 48 Hold ......................................
Inhaltszusammenfassung zur Seite Nr. 6
Setting your system to automatically answer calls ......... 59 Record announcement ...........59 Answering system capacity ...59 Voice prompts ...............................60 New message indication ........60 Turn alert on or off ....................60 Message playback ........................... 61 Options during playback .........62 Delete all old messages ..........62 Recording and delivering memos ........................... 64 Remote access ................................. 65 Appendix
Inhaltszusammenfassung zur Seite Nr. 7
Getting started Quick reference guide Softkeys MENU/ENTER Press to select an item Press to enter the menu. displayed above the key. While in the menu, press to select an item or save an entry or setting. L 1-L 4 keys Press to make or HOLD answer a call on Press to place an outside the desired line call on hold (page 32). (pages 25-26). SPKR OFF/CLEAR Press to turn on the During a call, press to handset speakerphone hang up (page 25). (page 25). While using menus, Press aga
Inhaltszusammenfassung zur Seite Nr. 8
Getting started Quick reference guide PTT (push-to-talk) VOLUME Press and release, then press During a call, press to DIR or CID to select an adjust the listening volume extension. Press and hold (page 29). to broadcast a message to During message playback, that extension or the base press to adjust the (page 40). playback volume (page 62). Press and hold to broadcast to all extensions (page 41). Main menu The > symbol highlights a menu item. Main menu Directory (page 43) >D
Inhaltszusammenfassung zur Seite Nr. 9
Getting started Installation If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. Your product may be shipped with a protective sticker covering the handset display - remove it before use. F
Inhaltszusammenfassung zur Seite Nr. 10
Getting started Charger installation Plug the power adapter into an electrical outlet not controlled by a wall switch. IMPORTANT INFORMATION 1. Use only the power adapt adapter er supplied with this pr supplied supplied with with this this pr product. oduct. T oduct. T To o or o or order der a der a a replacement power adapter, visit our website at www.telephones.att.com, or call 1 (888) 915-2007. In Canada, dial 1 (866) 288-4268. 2. The power adapter is intended to be correctly oriented
Inhaltszusammenfassung zur Seite Nr. 11
Getting started Handset battery installation and charging Install the battery as shown on the next page. Once you have installed the battery, the screen indicates the battery status (see table below). If necessary, place the handset in the charger to charge the battery. For best performance, keep the handset in the charger when not in use. The battery is fully charged after 16 hours of continuous charging. See the table on page 79 for battery operating times. If the screen is blank, you nee
Inhaltszusammenfassung zur Seite Nr. 12
Getting started Handset battery installation and charging Step 1 Step 2 Step 3 Plug the battery Align the cover flat To lock the battery connector securely against the battery compartment, turn into the socket inside compartment, then the latch clockwise the handset battery slide it upwards. until it points to compartment, matching the lock icon as the color-coded label. shown above. Insert the supplied battery with the label THIS SIDE UP facing up as indicated. 6
Inhaltszusammenfassung zur Seite Nr. 13
Getting started Handset battery installation and charging Step 4 To charge the handset, place it in the charger as shown. The CHARGE light is on when the handset is charging. CHARGE light Low battery indicator 1:Handset 1 Return the handset to the charger to recharge when the handset screen displays Low battery. Low battery To open the battery compartment for battery replacement, turn the latch counter-clockwise until it reaches the horizontal position as shown to the right. Slide the bat
Inhaltszusammenfassung zur Seite Nr. 14
Getting started Add and register handsets The handset provided with your SB67118 is pre-registered as Handset 1. Additional handsets are assigned numbers in the order they are registered (Handset 2 to Handset 10). You can register a maximum of ten handsets. You can add new handsets (SB67108, sold separately) to the SB67118 at any time, but each new handset must be registered with the telephone base before use. Each handset must be registered separately. If the handset does not have en
Inhaltszusammenfassung zur Seite Nr. 15
Getting started Add and register handsets NOTES: 1. If the registration is not successful, the screen shows Press MENU on BS, sel Registration & sel Register HS. Then put HS in cradle. To reset the handset, remove the handset from the charger. Try the registration process again. 2. Please make sure to remove all unregistered handsets from the chargers before registering a new handset. 9
Inhaltszusammenfassung zur Seite Nr. 16
Getting started Deregister all handsets You may need to deregister your handsets if you already have ten registered handsets and need to replace a handset, or if you wish to change the assigned numbers of your registered handsets. You must first deregister ALL the handsets, and then re-register each handset that you wish to use. Please read carefully through all the instructions in this section before beginning the deregistration process. This process deregisters all extensions registered
Inhaltszusammenfassung zur Seite Nr. 17
Getting started Deregister all handsets NOTES: 1. If the deregistration process is not successful, you might need to reset the system and try again. To reset: pick up the handset and press PHONE/FLASH, then press OFF/CLEAR and place the handset back into the charger. You can also reset the telephone base by unplugging the power from the telephone base and plugging it back in. 2. To re-register a cordless handset, see page 8. 11
Inhaltszusammenfassung zur Seite Nr. 18
Getting started Belt clip and optional headset Install belt clip as shown below if desired. Snap the belt clip into notches on To release the belt both sides of the clip, pull and unlock handset. one flap from the notch first before detaching the whole belt clip from the handset. To use an AT&T 2.5 mm headset, plug it into the jack on the side of the handset as shown below. Plug the 2.5 mm headset into the jack on the side of the handset (beneath the small rubber flap). 12
Inhaltszusammenfassung zur Seite Nr. 19
Getting started Handset setup Menu settings You can use the menus to change the handset settings. 1. Press MENU/ENTER when in idle mode (when the phone is not in use) to enter the main menu. 2. Press DIR or or CID t to o scr scroll oll t to o the f the feat eatur ure e t to o be changed. The be changed. The > symbol indicates the selected menu item. 3. Press MENU/ENTER to select the menu item. 4. Press OFF/CLEAR to exit setup without making changes. NOTE: Press OFF/CLEAR to cancel an operat
Inhaltszusammenfassung zur Seite Nr. 20
Getting started Handset setup Ringer tone You can choose one of seven ringer tones for incoming calls. Y You ou can choose different ringer tones for different lines so you can easily identify which line is ringing. 1. When the handset is idle, press MENU/ENTER. Ringer volume 2. Press DIR or CID to scroll to Ringer setting. >Ringer tone Press MENU/ENTER. Back 3. Press DIR or CID to scroll to Ringer tone. Press MENU/ENTER. Ringer tone L1 L2 L3 L4 4. Press or to select the desired lin
