Bedienungsanleitung AT&T 5927B

Inhaltszusammenfassung zur Seite Nr. 1

Quick start guide
5.8 GHz Cordless
Telephone/Answering
System E5926/E5927B/
E5937B/E5947B/E1937B
with caller ID/call waiting

Inhaltszusammenfassung zur Seite Nr. 2

Installation and setup After battery installation, place each handset in the telephone base or a charger and allow to charge for 16 hours before use. You can keep the battery packs charged by returning the handsets to the telephone base or chargers after each use. When the battery is fully depleted, a recharge takes about 12 hours. The average talk time on a fully charged bat- tery is about eight hours depending on environmental conditions, and the standby time is approximately four days

Inhaltszusammenfassung zur Seite Nr. 3

Quick reference guide Cordless handset CID SELECT/MENU Press to scroll down while in menus. Press to display menu, or to select a highlighted item from menu or save Press to display caller ID information. While entering names or numbers, an entry. press to move the cursor to the left. DIR PHONE/FLASH Press to scroll up while in menus. Press to display directory entries. While Press to make or answer a call. entering names, press to move the cur- sor to the right. During a call, press to r

Inhaltszusammenfassung zur Seite Nr. 4

Quick reference guide Telephone base VOLUME Press to adjust message playback volume. HANDSET LOCATOR Press to make handset(s) beep (see page 14). CHARGE IN USE On when the cordless handset is On when handset is in use or you are registering a hand- properly positioned to charge in set. Flashes when another phone is in use on the same the telephone base. line, or the answering system is answering an incoming call, or you are de-registering a handset from the base. Answering system controls