Inhaltszusammenfassung zur Seite Nr. 1
Planning Information
Models DD36I and DD36R Downdraft Systems
Top cover available
in three finishes
Model DD36I
Aluminum mesh
Internal Blower
filters
9" (229) chimney
Model DD36R elevation
In-Line or
Remote Blower
Remote-mounted
control module
Three-speed Stainless steel
Rating plate
blower control filter covers location
Model DD36I 36" (914) downdraft
The cooktop downdraft unit rises from the counter-
ventilation system includes a 500 CFM
top to whisk away odors and smoke into the easy-to-
inte
Inhaltszusammenfassung zur Seite Nr. 2
Planning Information Models DD36I and DD36R Downdraft Systems FEATURES Classic, platinum or carbon stainless steel LED indicators finishes available on control module and top 9" (229) chimney elevation cover Downdraft control kit includes control Remote mounted control module module, top cover, mounting brackets, DIN Internal, in-line and remote blower options connector and necessary hardware Three-speed blower control UL listed to US and Canadian safety standards Filter clean timer lets you k
Inhaltszusammenfassung zur Seite Nr. 3
Planning Information Models DD36I and DD36R Downdraft Systems MODEL OPTIONS SPECIFICATIONS Downdraft with 500 CFM Overall Width 36" (914) Internal Blower Included DD36I 1 Overall Height (above countertop) 9 /16" (230) Downdraft Only — In-Line or 3 Overall Depth 2 /8" (60) Remote Blower Required DD36R 1 Duct Size (Model DD36I) 3 /4" (83) x 10" (254) For Model DD36R see in-line and remote 1 blower options below. Duct Size (Model DD36R) 3 /4" (83) x 14" (356) Discharge Adjustable BLOWER OPTIONS Ele
Inhaltszusammenfassung zur Seite Nr. 4
Planning Information Models DD36I and DD36R Downdraft Systems 1 25 /8" MIN (638) 3 1 /4" MIN (45) OF FLAT COUNTERTOP* BACK EDGE OF COOKTOP 5 /8" 1 TO INSIDE OF 2 /2" MIN (16) 1 CABINET BACK* 19 /4" (489) (64) COOKTOP CUT-OUT WITH NO DEPTH RAISED LIP* .344" 3 2 /8" (60) 11 7 /16" 1 2 /8" (54) (197) 1 3 /4" (83) 5 29 /16" (745) COUNTERTOP 5 TO BOTTOM OF 3 /8" 36" AIR BOX (92) (914) 18" 5" (127) (457) 1 7 /8" (181) 24" MIN (610) CABINET DEPTH *AREAS OF POTENTIAL INTERFERENCE LOCATION OF ELECTRICA
Inhaltszusammenfassung zur Seite Nr. 5
Planning Information Models DD36I and DD36R Downdraft Systems INSTALLATION NOTES Refer to the illustrations and specifications Wolf downdraft ventilation systems require a for overall dimensions and installation specifics. separate, grounded 120 V AC, 60 Hz power supply. The service should have its own 15 Wolf downdraft ventilation systems are amp circuit breaker and a grounded 3-prong recommended for use with Wolf electric and receptacle should be located within the reach of gas cooktops and in
Inhaltszusammenfassung zur Seite Nr. 6
Planning Information Models DD36I and DD36R Downdraft Systems DUCTING CONSIDERATIONS Except for Models DD30I, DD36I and DD45I, Wolf downdraft systems have an adjustable which include a 500 CFM internal blower, Wolf discharge that will allow you to negotiate downdrafts are shipped without the blower ducting around floor joists and other obstacles. assembly. In-line and remote blower assemblies Three different discharge locations are available are available through your Wolf dealer. To obtain with
Inhaltszusammenfassung zur Seite Nr. 7
Planning Information Models DD36I and DD36R Downdraft Systems DUCTING CONSIDERATIONS For best performance, 10" (254) round ductwork Choose the ducting option that allows the is recommended. The downdraft will operate shortest length of ductwork and a minimum most efficiently when ductwork does not exceed number of elbows and transitions. Refer to the 40' (12 m) in length. Consult a qualified HVAC illustration below for ducting options. engineer for specific ducting applications. Refer to the coo
Inhaltszusammenfassung zur Seite Nr. 8
Planning Information Wolf Ventilation Recommendations WOLF BLOWER ASSEMBLIES A ventilation system must include a blower IMPORTANT NOTE: Use only a Wolf blower assembly. With a few exceptions where internal with all Wolf ventilation products. blowers are included, Wolf ventilation hoods and Internal blowers are mounted inside the hood downdrafts are shipped without the blower canopy or downdraft blower box. In-line blowers assembly. An internal, in-line or remote blower are mounted in between the
Inhaltszusammenfassung zur Seite Nr. 9
Planning Information Wolf Cooktop Ventilation Recommendations COOKTOP VENTILATION CFM RECOMMENDATIONS Cooktop Hoods, Downdrafts and Pro Hoods CTWH30 CTWH36 IH4227 DD30 DD36 DD45 Pro Hoods Electric Cooktops Model CT15E 215* 215* 215* 215* 150* 215* Model CT30E 450 600 600 500 350 600 Model CT30EU 450 600 600 600 Model CT36E 600 600 500 600 Model CT36EU 600 600 600 CTWH30 CTWH36 IH4227 DD30 DD36 DD45 Pro Hoods Gas Cooktops Model CT15G 215* 215* 215* 215* 150* 215* Model CT30G 450 600 600 500 350 6
