Inhaltszusammenfassung zur Seite Nr. 1
FIELD SERVICE
SERVICE MANUAL
P PagePro agePro
1380 MF/1390 MF 1380 MF/1390 MF
2006.01 2006.01
Ver. 2.0 Ver. 2.0
Inhaltszusammenfassung zur Seite Nr. 2
SAFETY AND IMPORTANT WARNING ITEMS SAFETY AND IMPORTANT WARNING ITEMS Read carefully the Safety and Important Warning Items described below to understand them before doing service work. IMPORTANT NOTICE Because of possible hazards to an inexperienced person servicing this product as well as the risk of damage to the product, KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. (hereafter called the KMBT) strongly recommends that all servicing be performed only by KMBT-trained service technicians. Chan
Inhaltszusammenfassung zur Seite Nr. 3
SAFETY AND IMPORTANT WARNING ITEMS SAFETY WARNINGS [1] MODIFICATIONS NOT AUTHORIZED BY KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. KONICA MINOLTA brand products are renowned for their high reliability. This reliability is achieved through high-quality design and a solid service network. Product design is a highly complicated and delicate process where numerous mechanical, physical, and electrical aspects have to be taken into consideration, with the aim of arriving at proper tolerances and sa
Inhaltszusammenfassung zur Seite Nr. 4
SAFETY AND IMPORTANT WARNING ITEMS [2] POWER PLUG SELECTION In some countries or areas, the power plug provided with the product may not fit wall outlet used in the area. In that case, it is obligation of customer engineer (hereafter called the CE) to attach appropriate power plug or power cord set in order to connect the product to the supply. Power Cord Set or Power Plug WARNING Use power supply cord set which meets the following criteria: - provided with a plug having configuration inte
Inhaltszusammenfassung zur Seite Nr. 5
SAFETY AND IMPORTANT WARNING ITEMS [3] CHECKPOINTS WHEN PERFORMING ON-SITE SERVICE KONICA MINOLTA brand products are extensively tested before shipping, to ensure that all applicable safety standards are met, in order to protect the customer and customer engi- neer (hereafter called the CE) from the risk of injury. However, in daily use, any electrical equipment may be subject to parts wear and eventual failure. In order to maintain safety and reliability, the CE must perform regular safety c
Inhaltszusammenfassung zur Seite Nr. 6
SAFETY AND IMPORTANT WARNING ITEMS Power Plug and Cord WARNING When using the power cord set (inlet type) that came with this product, make sure the connector is securely inserted in the inlet of the product. When securing measure is provided, secure the cord with the fixture properly. If the power cord (inlet type) is not connected to the prod- uct securely, a contact problem may lead to increased resistance, overheating, and risk of fire. Check whether the power cord is not stepped on
Inhaltszusammenfassung zur Seite Nr. 7
SAFETY AND IMPORTANT WARNING ITEMS Wiring WARNING Never use multi-plug adapters to plug multiple power cords in the same outlet. If used, the risk of fire exists. When an extension cord is required, use a specified one. Current that can flow in the extension cord is limited, so using a too long extension cord may result in fire. Do not use an extension cable reel with the cable taken up. Fire may result. 2. Installation Requirements Prohibited Installation Places WARNING Do not place th
Inhaltszusammenfassung zur Seite Nr. 8
SAFETY AND IMPORTANT WARNING ITEMS Ventilation CAUTION The product generates ozone gas during operation, but it will not be harmful to the human body. If a bad smell of ozone is present in the following cases, ventilate the room. a. When the product is used in a poorly ventilated room b. When taking a lot of copies c. When using multiple products at the same time Stability CAUTION Be sure to lock the caster stoppers. In the case of an earthquake and so on, the product may slide, leading t
Inhaltszusammenfassung zur Seite Nr. 9
SAFETY AND IMPORTANT WARNING ITEMS Work Performed with the Product Powered On WARNING Take every care when making adjustments or performing an operation check with the product powered. If you make adjustments or perform an operation check with the external cover detached, you may touch live or high-voltage parts or you may be caught in moving gears or the timing belt, leading to a risk of injury. Take every care when servicing with the external cover detached. High-voltage exists around
Inhaltszusammenfassung zur Seite Nr. 10
SAFETY AND IMPORTANT WARNING ITEMS Safety Checkpoints WARNING Check electrode units such as a charging corona unit for deterioration and sign of leakage. Current can leak, leading to a risk of trouble or fire. Before disassembling or adjusting the write unit (P/H unit) incorporating a laser, make sure that the power cord has been disconnected. The laser light can enter your eye, leading to a risk of loss of eyesight. Do not remove the cover of the write unit. Do not supply power with
Inhaltszusammenfassung zur Seite Nr. 11
SAFETY AND IMPORTANT WARNING ITEMS Safety Checkpoints WARNING Make sure that all screws, components, wiring, connec- tors, etc. that were removed for safety check and mainte- nance have been reinstalled in the original location. (Pay special attention to forgotten connectors, pinched cables, forgotten screws, etc.) A risk of product trouble, electric shock, and fire exists. Handling of Consumables WARNING Toner and developer are not harmful substances, but care must be taken not to breath
Inhaltszusammenfassung zur Seite Nr. 12
SAFETY AND IMPORTANT WARNING ITEMS Handling of Service Materials CAUTION Use only a small amount of cleaner at a time and take care not to spill any liquid. If this happens, immediately wipe it off. A risk of fire exists. When using any solvent, ventilate the room well. Breathing large quantities of organic solvents can lead to discomfort. S-11
Inhaltszusammenfassung zur Seite Nr. 13
SAFETY AND IMPORTANT WARNING ITEMS [4] Laser Safety This is a digital machine certified as a Class 1 laser product. There is no possibility of danger from a laser, provided the machine is serviced according to the instruction in this manual. 4.1 Internal Laser Radiation semiconductor laser Maximum power of the laser diode 15 mW Maximum average radiation power (*) 36.903 µW Wavelength 770-800 nm *at laser aperture of the Print Head Unit This product employs a Class 3b laser diode that emits
Inhaltszusammenfassung zur Seite Nr. 14
SAFETY AND IMPORTANT WARNING ITEMS U.S.A., Canada (CDRH Regulation) This machine is certified as a Class 1 Laser product under Radiation Performance Stan- dard according to the Food, Drug and Cosmetic Act of 1990. Compliance is mandatory for Laser products marketed in the United States and is reported to the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration of the U.S. Department of Health and Human Services (DHHS). This means that the device does n
Inhaltszusammenfassung zur Seite Nr. 15
SAFETY AND IMPORTANT WARNING ITEMS Finland, Sweden LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT VAROITUS! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saat- taa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle laser- säteilylle. puolijohdelaser Laserdiodin suurin teho 15 mW aallonpituus 770-800 nm VARNING! Om apparaten används på annat sätt än i denna bruksanvisning specificerats, kan användaren utsättas för osynlig laserstrålning, som överskrider
Inhaltszusammenfassung zur Seite Nr. 16
SAFETY AND IMPORTANT WARNING ITEMS 4.2 Laser Safety Label A laser safety label is attached to the inside of the machine as shown below. A. PagePro 1380 MF 4558P0C501DA S-15
Inhaltszusammenfassung zur Seite Nr. 17
SAFETY AND IMPORTANT WARNING ITEMS B. PagePro 1390 MF 4558P0C601DA S-16
Inhaltszusammenfassung zur Seite Nr. 18
SAFETY AND IMPORTANT WARNING ITEMS 4.3 Laser Caution Label A laser caution label is attached to the outside of the machine as shown below. A. PagePro 1380 MF 4558P0C505DA S-17
Inhaltszusammenfassung zur Seite Nr. 19
SAFETY AND IMPORTANT WARNING ITEMS B. PagePro 1390 MF 4558P0C602DA S-18
Inhaltszusammenfassung zur Seite Nr. 20
SAFETY AND IMPORTANT WARNING ITEMS 4.4 PRECAUTIONS FOR HANDLING THE LASER EQUIPMENT When laser protective goggles are to be used, select ones with a lens conforming to the above specifications. When a disassembly job needs to be performed in the laser beam path, such as when working around the printerhead and PC Drum, be sure first to turn the printer OFF. If the job requires that the printer be left ON, take off your watch and ring and wear laser protective goggles. A highly reflecti
