ملخص المحتوى في الصفحة رقم 1
Operating and Installation
Instructions
Ceramic combiset with Induction
CS 1221
en-US
To prevent accidents and
appliance damage,
read these instructions
before
installation or use. M.-Nr. 07 346 540
ملخص المحتوى في الصفحة رقم 2
Contents IMPORTANT SAFETY INSTRUCTIONS.................................3 Guide to the combiset..............................................8 Display...........................................................9 Burner data .......................................................9 Before using for the first time.......................................10 Clean the combiset ................................................10 Induction........................................................11 How it wor
ملخص المحتوى في الصفحة رقم 3
IMPORTANT SAFETY INSTRUCTIONS Children WARNING- When using your Activate the Child Safety Lock so appliance follow basic that the combiset cannot be turned on precautions, including the inadvertently. following: Children should not be left Read all instructions before unattended in an area where the installation or use to prevent appliance is in use. Never allow injury and appliance damage. children to sit or stand on any part of the appliance. This appliance conforms to all Caution: Do not
ملخص المحتوى في الصفحة رقم 4
IMPORTANT SAFETY INSTRUCTIONS Technical Safety Before servicing, disconnect the appliance from the main power supply. Installation, repair and maintenance work should be performed by a Miele Do not operate any appliance with a authorized service technician. Work by damaged cord or plug, or if the unqualified persons could be appliance has been damaged in any dangerous and may void the warranty. manner. Contact Miele’s Technical Service Department. Be sure your appliance is properly insta
ملخص المحتوى في الصفحة رقم 5
IMPORTANT SAFETY INSTRUCTIONS Do not cook on a broken combiset. The appliance gets hot when in use Any breakages or cracks in the ceramic and remains hot for quite a while after surface of the appliance are defects being turned off. As long as the surface and must be treated as such. If the temperature is high enough to cause a combiset should break, cleaning burn, the Residual Heat Indicator will solutions and spills may penetrate the remain lit. Once sufficient time has broken combiset and
ملخص المحتوى في الصفحة رقم 6
IMPORTANT SAFETY INSTRUCTIONS Do not use the appliance until it has Never cover the appliance with a been properly installed in the cloth. A fire may result. countertop. Be aware of loose fitting or hanging Do not store items on the appliance garments when operating the when not in use. Items could melt or appliance, they may present a fire catch fire from residual heat or if the hazard. appliance is turned on inadvertently. Never leave a combiset unattended Always switch the burner(s)
ملخص المحتوى في الصفحة رقم 7
IMPORTANT SAFETY INSTRUCTIONS Be careful not to drop anything on Do not allow solid or liquid sugar, the ceramic surface of the combiset. pieces of plastic or foil to fall on the Even lightweight objects may cause burner when hot. If these residues are damage. allowed to cool on the ceramic surface pitting or even cracking may occur. Pot and pan handles should be turned inward and not extend over the Any spills should be removed as countertop to reduce the risk of burns, quickly as possi
ملخص المحتوى في الصفحة رقم 8
Guide to the combiset Burner with booster Indicators Display Indicators Control knob On/Off indicator Booster indicator "Residual Heat" indicator 8
ملخص المحتوى في الصفحة رقم 9
Guide to the combiset Display ß = No pan on burner or pan is unsuitable A = Auto-heat F = Fault (see "Frequently asked questions") C / 0 = Safety cut-out feature (see "Safety features") I = Booster activated H = Overheating protection (see "Safety features") L = Child safety lock (see "Safety features") Burner data CS 1221 Minimum to maximum Rating in watts 240 V** diameter* 7" - 11 3/4" normal: 2,400 (18 cm - 30 cm) with Booster: 3,700 * Pots with a bottom diameter in the stated range may be us
ملخص المحتوى في الصفحة رقم 10
Before using for the first time Clean the combiset Heat the appliance Before using for the first time, clean When the combiset is first connected to the appliance with a damp cloth and the power supply and after a power dry with a soft cloth. failure, all indicators in the display will light up for approx. 1 second. The combiset can be used as normal once the indicators go out. Do not use liquid dish soap to clean the combiset, this may cause permanent blue discolorations. Metal components of
ملخص المحتوى في الصفحة رقم 11
Induction How it works If no pan or an unsuitable pan is placed on the burner, the burner and the An induction coil is located under the combiset will switch off automatically burner. When the burner is switched after 3 minutes. 0 will flash alternately on, this coil creates a magnetic field with C in the display. which impacts directly on the base of the pan and heats it up. The burner To use the burner again as normal, first itself is heated indirectly by the heat turn the control knob to "0".
ملخص المحتوى في الصفحة رقم 12
Induction Noises The appliance has a cooling fan to help extend the life of the electronics. When When using an induction burner, the the combiset is being used at high following noises can occur in the pan, levels for a long period of time, this will depending on what it is made of and come on and you will hear a whirring how it is constructed. sound. The fan may continue to run – Higher power settings may cause a after the appliance has been switched buzz. This will decrease or cease off. alto
ملخص المحتوى في الصفحة رقم 13
Induction Cookware Pan size Suitable pans include: To make optimum use of the burner, choose cookware that fits between the – stainless steel pans with a magnetic inner and outer marking of the burner. If base the base diameter of the pan is smaller – enameled steel pans than the inner marking, the induction heating will not work. The burner will – cast iron pans behave as if it has no pan on it. Unsuitable pans: – stainless steel pans without a magnetic base – aluminum and copper pans – glass,
ملخص المحتوى في الصفحة رقم 14
Use Turning the burner On/Off Residual heat indicator To turn the burner on, press the The residual heat indicator will go out control knob down and turn it once the combiset has cooled to a safe clockwise to the desired setting. temperature. As long as the residual heat indicator is lit do not touch or place any heat sensitive items on the burner. Danger of burns, and fire hazard. To turn the burner off, turn the control knob counterclockwise to "0". Do not turn the burner on without pr
ملخص المحتوى في الصفحة رقم 15
Use Settings Use for Power level* Melting butter, chocolate, etc. 1-2 Dissolving gelatin Prepare yogurt Warming small quantities of food or liquid 1-3 Keeping delicate dishes warm Cooking rice, Thawing frozen vegetables Warming liquid or half-set foods 2-4 Thickening sauces, e.g., hollandaise sauce Cooking rice pudding Defrosting frozen foods 3-5 Steaming vegetables, fish, etc. Cooking pasta, soups, etc. Steaming grains Boiling and continued cooking of large quantities of food 5 - 6 Gently sauté
ملخص المحتوى في الصفحة رقم 16
Use Auto-heat Activating Auto-heat When Auto-heat has been activated, Turn the control knob the burner switches on automatically at counterclockwise as far as it will go the highest setting and then switches to and hold until an A appears in the the continued power level which was display. selected. The "heat-up" time depends on which continued power level has If the knob is held too long, an L will been chosen (see table). appear in the display and the Lock is activated (see "Child safety loc
ملخص المحتوى في الصفحة رقم 17
Use Booster function To activate the Booster The burner is equipped with a booster Turn the control knob past power function to temporarily increase the level 9 to BI, then turn back to level 9. power level. This boost is intended to I appears in the display and the B quickly bring large quantities of water indicator lights up. to the boil, e.g. cooking pasta. When the Booster is activated the burner will To deactivate the Booster function operate with extra power for 10 minutes. The booster f
ملخص المحتوى في الصفحة رقم 18
Use Keep warm Tips This function can be used for keeping – Cover the pan with a lid. food warm right after it has been – It is not necessary to stir the food cooked. It is not for reheating food while it is being kept warm. which has already cooled. – Nutrients are lost when food is Once activated the keep warm function cooked, therefore try to keep the will switch off automatically after 2 warming time to a minimum. hours. 18
ملخص المحتوى في الصفحة رقم 19
Safety features Child Safety Lock Safety cut-out The combiset has a safety cut-out Keep children away from the feature in case it is not turned off after combiset for their own safety. use. The combiset has a Child Safety Lock If the burner is heated for an unusually to prevent children from turning on the long period of time (see table), and the burner. power level settings are not adjusted, the combiset will turn itself off To activate the Child Safety Lock: automatically and the residual heat
ملخص المحتوى في الصفحة رقم 20
Safety features Overheating protection Once the burner has cooled to a safe temperature the combiset can be used The induction coils and the cooling again as normal. element of the electronics are fitted with an overheating protection feature. This prevents the induction coils and cooling The overheating protection feature may element from overheating. be activated by: This mechanism works in the following – heating an empty pan, ways: – oils or fats being heated on the – If the booster function
