Fisher & Paykel GC9002 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

NEW ZEALAND,
AUSTRALIA and SINGAPORE
INSTALLATION INFORMATION FOR GC600, GC9002, CG901 SERIES* GAS COOKTOPS
IMPORTANT INFORMATION WARNINGS BEFORE YOU START
This appliance shall be installed in accordance with the installation DO Prior to installation, ensure that the local distribution conditions
Read the instructions before installing or using this
requirements of the local gas authority or the appropriate installation (nature of gas and pressure) and the adjustment of the product
product.
c

ملخص المحتوى في الصفحة رقم 2

NEW ZEALAND, AUSTRALIA and SINGAPORE INSTALLATION INFORMATION FOR GC600, GC9002, CG901 SERIES* GAS COOKTOPS IMPORTANT INFORMATION WARNINGS BEFORE YOU START This appliance shall be installed in accordance with the installation DO Prior to installation, ensure that the local distribution conditions Read the instructions before installing or using this requirements of the local gas authority or the appropriate installation (nature of gas and pressure) and the adjustment of the product product. c

ملخص المحتوى في الصفحة رقم 3

Gas Supply GAS RATE SUMMARY GAS SUPPLY CONNECTION FOR NATURAL GAS MODELS Your product is factory set for Natural Gas but may be converted to The product is supplied set up for Natural Gas. This cooktop is For NG Models the gas supply is connected to the regulator which is LPG use. See overleaf. Refer to the chart below for ratings. suitable for installation with Natural Gas, or LP Gas. Refer to table for supplied loose with a built in test point - 1kPa (4" WG) and the inlet the relevant press

ملخص المحتوى في الصفحة رقم 4

Gas Supply GAS RATE SUMMARY GAS SUPPLY CONNECTION FOR NATURAL GAS MODELS Your product is factory set for Natural Gas but may be converted to The product is supplied set up for Natural Gas. This cooktop is For NG Models the gas supply is connected to the regulator which is LPG use. See overleaf. Refer to the chart below for ratings. suitable for installation with Natural Gas, or LP Gas. Refer to table for supplied loose with a built in test point - 1kPa (4" WG) and the inlet the relevant press