ملخص المحتوى في الصفحة رقم 1
Touch control
Installation instructions
ceramic glass cooktops
and User guide
CE604DT, CE704DT,
and CE754DT models
NZ AU GB IE
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
1 Contents Safety and warnings 2 Installation instructions 6 Introduction 12 Using your cooktop 14 Using your cooktop’s special features 18 Cooking guidelines 23 Care and cleaning 26 Troubleshooting 28 Warranty and service 30 Important! SAVE THESE INSTRUCTIONS The models shown in this user guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, pl
ملخص المحتوى في الصفحة رقم 4
2 Safety and warnings Your safety is important to us. Please read this information before using your cooktop. Installation WARNING! Electrical Shock Hazard Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on it. Connection to a good earth wiring system is essential and mandatory. Alterations to the domestic wiring system must only be made by a qualified electrician. Failure to follow this advice may result in electrical shock or death.
ملخص المحتوى في الصفحة رقم 5
3 Safety and warnings Important safety precautions Read these instructions carefully before installing or using this appliance. No combustible material or products should be placed on this appliance at any time. Please make this information available to the person responsible for installing the appliance as it could reduce your installation costs. In order to avoid a hazard, this appliance must be installed according to these instructions for installation. This appliance is to be prope
ملخص المحتوى في الصفحة رقم 6
4 Safety and warnings Operation and maintenance WARNING! Electrical Shock Hazard Do not cook on a broken or cracked cooktop. If the cooktop surface should break or crack, switch the appliance off immediately at the mains power supply (wall switch) and contact a qualified technician. Switch the cooktop off at the wall before cleaning or maintenance. Failure to follow this advice may result in electrical shock or death. WARNING! Hot Surface Hazard During use, accessible parts of this app
ملخص المحتوى في الصفحة رقم 7
5 Safety and warnings Important safety precautions Never leave the appliance unattended when in use. Boilover causes smoking and greasy spillovers that may ignite. Never use your appliance as a work or storage surface. Never leave any objects or utensils other than suitable cookware on the appliance. Never use your appliance for warming or heating the room. Do not allow children to play with the appliance or sit, stand or climb on it. Do not store items of interest to children in cabinets
ملخص المحتوى في الصفحة رقم 8
CE754DT CE704DT CE604DT 6 Installation instructions Cooktop and cutout dimensions Electrical connection is made at the middle rear A B I C C E D G F Cooktop and cutout dimensions (mm) 600 700 750 A overall width of cooktop 530 530 530 B overall depth of cooktop height of chassis (below top of bench) 48 48 48 C I C height of terminal block (below top of bench) 58 58 58 552 552 715 D width of chassis 480 480 480 E depth of chassis overall width of cutout 560 560 725 F G overall depth of cutout
ملخص المحتوى في الصفحة رقم 9
CE754DT CE704DT CE604DT 7 Installation instructions Clearances A B D C C E Clearances (mm) minimum clearance from rear edge of cutout to: A 55 55 55 nearest combustible surface minimum clearance from glass surface to: B rangehood 650 650 650 minimum clearance from side edges of cutout to: C nearest combustible surface 85 135 78 minimum clearance from benchtop to: D overhead cabinet not directly above the cooktop 450 450 450 minimum clearance below top of benchtop to: E thermal protection
ملخص المحتوى في الصفحة رقم 10
8 Installation instructions Before you install the cooktop, make sure that the benchtop is square and level, and no structural members interfere with space requirements the benchtop is made of a heat-resistant material the cooktop will not be installed directly above a dishwasher, as the humidity may damage the cooktop electronics the installation will comply with all clearance requirements and applicable standards and regulations a suitable isolating switch providing full disconnection
ملخص المحتوى في الصفحة رقم 11
9 Installation instructions Fastening the cooktop to the bench 1 Turn the cooktop upside down and place it on a soft surface. 2 Spread the seal around the edges of the ceramic glass with the adhesive side facing down, making sure that the whole perimeter is sealed. Cut off any excess material. 3 Mount the supplied clamps (A) and screws (B) onto the cooktop, as shown (without tightening the screws). 4 Place the cooktop into the cutout, then tighten the screws to clamp the cooktop securely to th
ملخص المحتوى في الصفحة رقم 12
10 Installation instructions Connecting the cooktop to the mains power supply Important! This cooktop must be connected to the mains power supply only by a suitably qualified person. This cooktop must be earthed. Before connecting the cooktop to the mains power supply, check that: 1 the domestic wiring system is suitable for the power drawn by the cooktop 2 the voltage corresponds to the value given on the rating plate 3 the power supply cable sections can withstand the load specified
ملخص المحتوى في الصفحة رقم 13
11 Installation instructions Final checklist TO BE COMPLETED BY THE INSTALLER Is the cooktop earthed? Check that the power supply cable is NOT touching the base of the cooktop. This will ensure that the cable is not damaged by heat from the cooktop. Check that the power supply cable is not accessible via cupboard doors or drawers. Is the cooktop clamped down securely? Check that all the cooking zones function correctly. Turn on all of them to a high setting and leave them on for at l
ملخص المحتوى في الصفحة رقم 14
12 Introduction About your new cooktop Thank you for buying a Fisher & Paykel ceramic glass cooktop. This guide introduces you to all its special features. We recommend you read the whole guide before using your new cooktop, for both safety and cooking success. For more information, visit our local website listed on the back cover. Before using your new cooktop Read this user guide, taking special note of the ‘Safety and warnings’ section. Remove any protective film that may still be on you
ملخص المحتوى في الصفحة رقم 15
13 Introduction Touch controls overview These indicators show which cooking zone(s) the timer is set for: if flashing: Timer display: timer is selected and ready - shows the to be set number of if on: minutes set/ if steadily lit: outer section of the dual remaining timer is set and counting cooking zone is on down - shows CL if off: (cleared) if the outer section of the dual if flashing and beeping: timer is not set cooking zone is off set time is up if on: controls (except if
ملخص المحتوى في الصفحة رقم 16
14 Using your cooktop Using the touch controls The cooking zone and timer displays also function as touch controls. To select a cooking zone or the timer, simply touch its display. Use the ball of your finger, not its tip. The controls respond to touch, so you don’t need to apply any pressure. Once you have selected a cooking zone or the timer, you have 10 seconds to set it (while the little red light at the bottom right of the display is on). If the little red light goes out before
ملخص المحتوى في الصفحة رقم 17
15 Using your cooktop To start cooking 1 Turn on the cooktop. 2 Select a cooking zone. Notes: CL (cleared) in the timer display means that the timer is not set. If you do not select a cooking zone within 20 seconds, the cooktop will automatically turn off. 3 Select a heat setting (0-9). Note: setting u (between 0 and 1))provides continuous gentle heat between 0 and 1. See ‘Using your cooktop’s special features’.
ملخص المحتوى في الصفحة رقم 18
16 Using your cooktop To modify the heat setting during cooking 1 Select a cooking zone. 2 Modify its heat setting. When you have finished using a cooking zone, you can turn it off, but continue to use other cooking zones: 1 Select the cooking zone you want to turn 2 Decrease its heat setting until the display off. shows 0. If the cooking zone surface is too hot to touch, H will replace 0 in the display. turn the whole cooktop off: 1 Turn the cooktop off. 2 H will show which cooking zone sur
ملخص المحتوى في الصفحة رقم 19
17 Using your cooktop Using the dual (right rear) cooking zone When you turn the dual (right rear) cooking zone on, both the inner and outer sections will heat. Use the control to toggle the outer section off or on again. outer section outer section ON OFF Locking the controls You can lock the controls to prevent unintended use (for example children accidentally turning cooking zones on). When the controls are locked, all controls except the ON/OFF control are disabled. To lock the control
ملخص المحتوى في الصفحة رقم 20
18 Using your cooktop’s special features Using the Auto Heat-reduce feature Cooking zones set for this feature will: first quickly heat up food or liquid at the highest setting then automatically reduce the heat to a preset lower setting to cook the food through. To set a cooking zone for Auto Heat-reduce 1 Select a cooking zone. 2 Select heat setting 9. 3 Re-touch the right end of the setting 4 Choose the lower heat setting you want the selector. cooking zone to automatically reduce to
