ملخص المحتوى في الصفحة رقم 1
2-Line
™
V ViiS SY YSS
Speakerphone
User’s Guide
25214
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in com- pliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for TelephoneTerminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment.You must, upon reques
ملخص المحتوى في الصفحة رقم 4
The telephone company may make changes in its communications facilities, equipment, operations or proce- dures where such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If these changes are expected to affect the use or performance of your telephone equipment, the telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted service. Interference Information This device complies with Part 15 of the
ملخص المحتوى في الصفحة رقم 5
Table of Contents Equipment Approval Information 2 - Mute 17 - Do Not Disturb 17 Interference Information 3 - Flash 18 Licensing 3 - Inserting a Pause in the Dialing Hearing Aid Compati
ملخص المحتوى في الصفحة رقم 6
Introduction CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. Parts Checklist Make sure your package includes the following items: Coiled Handset Cord Corded Handset AC power Short Line Cord Telephone adaptor 2- Line cords (for base) 5
ملخص المحتوى في الصفحة رقم 7
Telephone Jack Requirements To use this phone, you will need a RJ11C (for a single line) or a RJ14C (for two lines) type modular phone jack, which might look like the one pictured here, installed in your home or office. If you find don’t have either modular jack, call your local phone company to find out how to get one installed. Wall plate Modular telephone line jack 7 Important Installation Guidelines • Avoid sources of noise and heat, such as motors, fluorescent lighting, microwave
ملخص المحتوى في الصفحة رقم 8
Phone Layout Display Volume +/- Message Waiting 3 Soft Keys Prev Key Next Key One-Touch Memory Log Directory, Caller ID DND/Delete, Exit Redial, Flash Tone Headset, Hold, Pause Line1, Speakerphone Mute Line 2 7
ملخص المحتوى في الصفحة رقم 9
Installing the Phone The phone may be connected by a single two-line cable or two single line cables. 1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and place your cordless telephone on a level surface, such as a desktop or tabletop, or you may mount it on the wall. 2. Install 5 AAA-size alkaline batteries (not included) for back up power in the event of a power failure. • Insert a flat-head screwdriver or similar object into the battery door latch and g
ملخص المحتوى في الصفحة رقم 10
Or, you can use the 2 single telephone lines plug into the 2 jacks on the back of the telephone. Line 1 Line 2 If you have Line 1 and Line 2 wired into one wall jack in your home or office, you can use one of the supplied telephone line cords to connect from the wall jack to the Line 1 + 2 jack on the back of the phone as shown below. Line 1 + 2 5. If you want to mount the telephone on the wall, you can plug the 2 lines such as the below drawing; Line 2 Line 1 9
ملخص المحتوى في الصفحة رقم 11
-OR- Line 2 Line 1 -OR- Line 1 & 2 6. Connect the handset cord: Connect one end of the coiled handset cord to the jack on the side of the base and the other end into the jack in the handset, and place the handset in the cradle. 10
ملخص المحتوى في الصفحة رقم 12
Programming the Phone Standby Screen The phone displays the current date, time and the Soft keys. NOTE: The Soft keys will change according to the status of the unit. NOTE: The LCD has a dedicated “SET CLOCK” icon flashing when the clock is not set. Please go to menu “Phone Setting- Date /Time” to set the clock. If you subscribe to Caller ID services from your telephone service provider, your clock will be set automatically each time you receive a phone call. However, you will need
ملخص المحتوى في الصفحة رقم 13
Delete button to backspace and delete numbers, if necessary. 12:00AM 01/01/10)
ملخص المحتوى في الصفحة رقم 14
Note: The line 1 default ring tone is melody 1 and the line 2 default is melody 2.
ملخص المحتوى في الصفحة رقم 15
Key Tone From the Sound Settings Menu: 1. Use the VOL (- or +) button to scroll to Key Tone. 2. Press the OK Soft key. 3. Use the VOL (- or +) button to scroll to select either On or Off. 4. Press the OK Soft key to select. 5. A confirmation tone will indicate that your selection has been saved. Note: the default setting is On. Dial Mode From the Phone Settings Menu: 1. Use the VOL (- or +) button to scroll to Dial Mode. 2. Press the OK Soft key. 3. Use the VOL (- or +) button to scroll to selec
ملخص المحتوى في الصفحة رقم 16
Warning: Pressing OK will return phone to its default state. This will reset date/time and all menu settings to default.
ملخص المحتوى في الصفحة رقم 17
Telephone Operation Making Calls with the Corded Handset 1. Pick up the handset. The unit will automatically select the available line. If both lines are available, Line 1 will be used first. -OR- Press the Line1 or Line 2 button and then pick up the corded handset to select the desired line 2. Wait for a dial tone, and then dial a phone number using dial-pad, the directory or a one-touch speed dial. 3. Hang up the handset when finished. Making Calls in Speakerphone Mode 1. Press the spe
ملخص المحتوى في الصفحة رقم 18
This feature is set at individual telephones to disable (silence) an incoming ring signal. When there is an incoming call , the status indicators will function, but the phone will not ring.
ملخص المحتوى في الصفحة رقم 19
Flash If you subscribe to Call Waiting service from your telephone service provider and you receive an incoming call on while a call is currently active on the same line, you will hear an audible tone to indicate another call is waiting. Also, Caller ID information (if available) for the waiting call will be displayed. 1. To connect to the waiting call, press the Flash button on your phone. This will place the origian call on hold and connect you to the new incoming call. 2.To switch b
ملخص المحتوى في الصفحة رقم 20
6. You can edit the telephone number by using the Delete button and number keys.
