ملخص المحتوى في الصفحة رقم 1
Avaya Video Conferencing
Solutions Quick Setup
Release 6.0
16-300310
Issue 1
August 2010
ملخص المحتوى في الصفحة رقم 2
© 2010 Avaya Inc. All Rights Reserved. Preventing toll fraud "Toll fraud" is the unauthorized use of your telecommunications system by an Notice unauthorized party (for example, a person who is not a corporate employee, While reasonable efforts were made to ensure that the information in this agent, subcontractor, or is not working on your company's behalf). Be aware document was complete and accurate at the time of printing, Avaya Inc. can that there can be a risk of toll fraud associated
ملخص المحتوى في الصفحة رقم 3
Canadian Department of Communications (DOC) Interference Information This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicat
ملخص المحتوى في الصفحة رقم 4
Overview This Quick setup guide covers the basic administration tasks to set up SIP and H.323 video endpoints. For detailed information, see Avaya video conferencing Solutions Networking Guide 6.0. This guide is intended for technicians installing the following video endpoints: SIP endpoints ● Avaya Series 1000 Video Conferencing Endpoints ® ● Avaya one-X Communicator H.323 endpoints ● Polycom HDX video calling systems ● Polycom RMX video conferencing bridge platforms ● Polycom PathNavigator/C
ملخص المحتوى في الصفحة رقم 5
Configuration of SIP video endpoints on Communication Manager 6.0 ● Perform a network readiness test or network assessment to ensure your network is capable of supporting bandwidth demands of video over IP. Avaya recommends implementing quality of service (QoS) across your network Configuration of SIP video endpoints on Communication Manager 6.0 This section provides the procedure to configure video calling facility on SIP endpoints with Communication Manager 6.0. Enabling video on Communica
ملخص المحتوى في الصفحة رقم 6
Configuration of SIP video endpoints on Communication Manager 6.0 Table 1: Enabling video on Communication Manager 3 Enabling video for the SIP signaling group 1. On System Manager, click Elements > Feature Management > Network - Signaling Groups. 2. On the Signaling Groups page, click the arrow icon next to the Select Device(s) from Communication Manager List. 3. From the Communication Manager list, select the appropriate Communication Manager, and click Show List. 4. Select the appropria
ملخص المحتوى في الصفحة رقم 7
Configuration of SIP video endpoints on Communication Manager 6.0 Table 1: Enabling video on Communication Manager 4 Identifying the IP-codec-set 1. Note the values of the Near-end Node Name and Far-end Network Region fields. 2. If the Near-end Node Name field is set to PROCR, the listed value is used. If the Near-end Node Name field is set to CLAN, enter list ip-interface clan to find the correct CLAN and make a note of the slot value. These values are used to determine the IP-Codec-set. 3
ملخص المحتوى في الصفحة رقم 8
Configuration of SIP video endpoints on Communication Manager 6.0 Administration of Avaya Series 1000 Video Conferencing and ® Avaya one-X Communicator video endpoints and users using System Manager Perform the following steps to configure all Avaya Series 1000 Video Conferencing Endpoints ® and Avaya one-X Communicator with SIP video. This section describes how to use System Manager to create an endpoint template and how to add users using these templates. Creating a template Table 2: Creat
ملخص المحتوى في الصفحة رقم 9
Configuration of SIP video endpoints on Communication Manager 6.0 Table 3: Creating a template Enabling Call Appearace feature 1 1. To enable the Call Appearance feature, click Button Assignment, and set the main buttons to call appr as follows : ● Avaya 1010 : 1 ● Avaya 1020 : 1 ● Avaya 1030 : 1 ● Avaya 1040 : 3 ® ● Avaya one-X Communicator : 3 ● Avaya 1050 : 7 Note: Note: The call appearances must be set to the maximum limit permitted for each endpoint. ® 2. Select the IP SoftPhone check bo
ملخص المحتوى في الصفحة رقم 10
Configuration of SIP video endpoints on Communication Manager 6.0 Adding video users Table 4: Adding video users 1 Creating a New User Profile On System Manager, click Users > Manage Users and click on New to open the New User Profile page. Fill in the following fields: ● Last Name ● First Name ● Login Name : Example: ext@sip domain ● Authentication Type : Basic ● SMGR Login Password : ● Shared Communication Profile Password : Corresponds to the authorization password for the series Avay
ملخص المحتوى في الصفحة رقم 11
Configuration of SIP video endpoints on Communication Manager 6.0 Table 4: Adding video users 3 Enabling Session Manager Profile Select the check box corresponding to Session Manager profile and set the following parameters: ● Primary Session Manager : Appropriate option ● Secondary Session Manager : None ● Origination Application Sequence : Appropriate Communication Manager Server ● Terminating Application Sequence : Appropriate Communication Manager Server ● Survivability Server : None ● Ho
ملخص المحتوى في الصفحة رقم 12
Configuration of SIP video endpoints on Communication Manager 6.0 Configuring the Avaya Series 1000 Video Conferencing Endpoints Perform the following steps to configure all Avaya Series 1000 Video Conferencing Endpoints using the IR Remote Control. You can also configure each endpoint using a Web browser. See the Networking Guide for more information. If configuring the endpoint for the first time, you see the initial configuration wizard. You may set up the endpoint using the wizard or skip
ملخص المحتوى في الصفحة رقم 13
Configuration of SIP video endpoints on Communication Manager 6.0 Table 5: Configuring Avaya Series 1000 Video Conferencing Endpoints 3 Enabling SIP protocol Select Communications, click on SIP, and set the following parameters: ● SIP Username : ext. This parameter is the same as step 1 of Table 4: Adding video users on page 10 ● Authorization Name : Same as SIP Username ● Authorization Password : Same as the Shared Communication Profile Password used in step 2 of Table 4: Adding video users o
ملخص المحتوى في الصفحة رقم 14
Configure H.323 video endpoints on Communication Manager 6.0 Configure H.323 video endpoints on Communication Manager 6.0 This section provides a set of guidelines to configure video calling facility on H.323 endpoints with Communication Manager 6.0. Configure Polycom VSX/HDX Series Video Conferencing Systems and V500/V700 Video Calling Systems Use the following procedure to configure Polycom VSX/HDX video conferencing systems and V500 and V700 video calling systems. When setting up these sy
ملخص المحتوى في الصفحة رقم 15
Configure H.323 video endpoints on Communication Manager 6.0 Configuring Polycom Endpoints Use this procedure to configure the Video calling facility for all Polycom endpoint users. Table 6: Configuring Polycom Endpoints 1Enter display system-parameters customer-options to verify the Maximum Video Capable Stations (page 2 of screen). This number is provided by the RFA license file. The Maximum Video Capable Stations was determined using the following criteria: ● Each V500/700 system is consid
ملخص المحتوى في الصفحة رقم 16
Configure H.323 video endpoints on Communication Manager 6.0 Table 7: Add users/stations to Polycom endpoints 1 Install the Polycom system and connect it to your network. 2 Upgrade the Polycom system software (if necessary). 3 Using a web browser, access the Polycom home page for the unit, and select Admin Settings > Network > IP Network. 4 Check the Enable IP H.323 check box. 5 Check the Display H.323 Extension check box. 6 In the H.323 Extension (E.164) box, enter the station number you specif
ملخص المحتوى في الصفحة رقم 17
Configure H.323 video endpoints on Communication Manager 6.0 Configuring Polycom RMX Series Video Conferencing Bridge Platform Use this procedure to configure the Polycom RMX series video conferencing Bridge platform. Table 8: Configuring Polycom RMX Series Video conferencing on Bridge Platform 1. Enter change node-names ip to add an entry for the RMX system. Be sure to enter the IP address of the IP board for the RMX system. 2Enter add trunk-group to add a two-way trunk group for the RMX syst
ملخص المحتوى في الصفحة رقم 18
Configure H.323 video endpoints on Communication Manager 6.0 Table 8: Configuring Polycom RMX Series Video conferencing on Bridge Platform 4 Use the change trunk-group n command (where n is the trunk group you added in Step 2) to add members to the trunk group. The number of members depends on the maximum simultaneous calls an RMX supports. 5 Use the change route-pattern n command (where nis the route pattern you want to use) to create a route pattern that points to the two-way trunk group. 6
ملخص المحتوى في الصفحة رقم 19
Configure H.323 video endpoints on Communication Manager 6.0 Configuring Ad-hoc Video Conferencing for a Polycom RMX Video Conferencing Bridge Platform To configure Ad-hoc conferencing for a Polycom RMX video conferencing bridge platform, perform the following steps: Table 9: Configuring Ad-hoc video for Polycom RMX video Conferencing Bridge Platform 1 Perform the procedures in the section Table 8: Configuring Polycom RMX Series Video conferencing on Bridge Platform on page 13 to configure th
ملخص المحتوى في الصفحة رقم 20
Configure H.323 video endpoints on Communication Manager 6.0 Table 9: Configuring Ad-hoc video for Polycom RMX video Conferencing Bridge Platform 4 Use the add video-bridge command to configure a video bridge for the RMX system. Set the following parameters: ● Name to the name for this video bridge (for example, Ad Hoc video Bridge - RMX). ● Max Ports to the maximum number of Ad-hoc conferencing ports you want to assign to this bridge. (The minimum you can enter is 3.) This is equivalent to
