ملخص المحتوى في الصفحة رقم 1
PlasmaSync Plasma Monitor
™
PlasmaSync 50XM5
PX-50XM5A
Start up Guide
Start up Guide
Guide rapide
Guía de inicio
Guia de iniciação
NEC Solutions (America), Inc.
ملخص المحتوى في الصفحة رقم 2
202
ملخص المحتوى في الصفحة رقم 3
Start up Guide (Enhanced split screen Model) For the operation of your plasma monitor, refer to the CD-ROM. Contents User’s Manual on CD-ROM The complete user’s manual is supplied on the CD-ROM in Important Information.................................. En-2 PDF (Portable Document Format) and provides detailed Installation .................................................. En-4 product and useage information for your NEC plasma monitor. Ventilation Requirements for enclosure mounting ...... En-4
ملخص المحتوى في الصفحة رقم 4
Important Information To avoid damage and prolong operating life: Precautions 1. Use only with 100-240V 50/60Hz AC power supply. Continued Please read this manual carefully before using your plasma monitor and operation at line voltages greater than 100-240 Volts AC will shorten keep the manual handy for future reference. the life of the unit, and might even cause a fire hazard. 2. Handle the unit carefully when installing it and do not drop. CAUTION 3. Set the unit away from heat, excess
ملخص المحتوى في الصفحة رقم 5
Warning Caution Not for use in a computer room as defined in the This model is for use with the following optional Standard for the Protection of Electronic Computer/ accessories. Use with other optional accessories is Data Processing Equipment ANSI/NFPA 75. capable of resulting in instability causing possible injury. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant Manufacturer’s name: NEC Viewtechnology, Ltd. to Part 15 of the FCC Rules
ملخص المحتوى في الصفحة رقم 6
Installation You can attach your optional mounts or stand to the plasma monitor in one of the following two ways: * While it is upright. (See Drawing A) * As it is laid down with the screen face down (See Drawing B). Lay the protective sheet, which was wrapped around the monitor when it was packaged, beneath the screen surface so as not to scratch the screen face. * Do not touch or hold the screen face when carrying the unit. • This device cannot be installed on its own. Be sure to use a stand o
ملخص المحتوى في الصفحة رقم 7
ملخص المحتوى في الصفحة رقم 8
VOLUME INPUT SELECT MENU/ENTER DOWN UP LEFT/- RIGHT/+ /EXIT IN OUT External Control REMOTE Top side Caution when placing the plasma monitor in portrait mode • Use the optional unit. Contact your store of purchase when installing. OPTION1 OSM BNC INPUT : RGB D-SUB INPUT • Rotate 90° clockwise as seen from the front when installing. : RGB 90° RGB SELECT : AUTO HD SELECT : 1080B INPUT SKIP • After installing, make sure the NEC logo is located at the : OFF ALL RESET : OFF 1024768
ملخص المحتوى في الصفحة رقم 9
Part Names and Function Front View VOLUME INPUT SELECT MENU/ENTER DOWN UP LEFT/- RIGHT/+ /EXIT VOLUME INPUT SELECT MENU/ENTER DOWN UP LEFT/- RIGHT/+ /EXIT 7 6 5 4 1 3 2 q Power t LEFT/– and RIGHT/+ Turns the monitor’s power on and off. Enlarges or reduces the image. Functions as the CURSOR ( / ) buttons in the On-Screen Menu w Remote sensor window (OSM) mode. Receives the signals from the remote control. y VOLUME DOWN and UP e POWER/STANDBY indicator Adjusts the volume. Functions as the CURS
ملخص المحتوى في الصفحة رقم 10
VIDEO VIDEO 2 AUDIO 1 DVD1 / HD1 AUDIO 2 RGB2 / DVD2 / HD2 RGB 1 AUDIO 3 RGB 3 R R R R/ G/ B/ VIDEO 1 Cr/Pr Y Cb/Pb HD VD Y Cb/Pb Cr/Pr ( ) IN OUT DVI Digital RGB REMOTE External Control L L L (MONO) (MONO) (MONO) VIDEO 3 Rear View/ Terminal Board C D E F G H A B I J K A AC IN H RGB3 (DVI 24pin) Connect the included power cord here. Connect a digital signal (TMDS) from a source with a DVI output. B EXT SPEAKER L and R This input can be set for use with an RGB/PC3. Connect speakers (optional) h
ملخص المحتوى في الصفحة رقم 11
ملخص المحتوى في الصفحة رقم 12
Basic Operations POWER OFF TIMER To turn the unit ON and OFF: To set the off timer: The off timer can be set to turn the power off after 30, 60, 1. Plug the power cord into an active AC power outlet. 90 or 120 minutes. 2. Press the Power button (on the unit). 1. Press the OFF TIMER button to start the timer at 30 The monitor’s POWER/STANDBY indicator turns red minutes. and the standby mode is set. 2. Press the OFF TIMER button to the desired time. 3. Press the POWER ON button (on the remote cont
ملخص المحتوى في الصفحة رقم 13
OSM (On Screen Menu) Controls Menu Operations Note: The main menu disappears by pressing the EXIT The OSM window is displayed with respect to the button. screen as shown on the diagram. Information * Depending on the screen’s mode, the OSM may be displayed differently. Advanced menu mode In the explanation, the OSM section is shown close up. When “ADVANCED OSM” is set to “ON” in the main MAIN MENU 1 / 2 menu (1/2), full menu items will be shown. PICTURE AUDIO IMAGE ADJUST OPTION 1 MAIN MENU 1
ملخص المحتوى في الصفحة رقم 14
* For further details of each menu item, please refer to the CD-ROM. Menu Tree :Shaded areas indicate the default value. ←→: Press the or button to adjust. :Menu items in a ruled box are available when the ADVANCED OSM is set to ON. Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET REFERENCE PICTURE CONTRAST ←→ 0←52→72 YES En-20 BRIGHTNESS ←→ 0←32→64 YES En-20 SHARPNESS ←→ 0←16→32 YES En-20 COLOR ←→ 0←32→64 YES En-20 TINT R←→G 0←32→64 YES En-
ملخص المحتوى في الصفحة رقم 15
Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET REFERENCE OPTION2 PWR. MGT. OFF←→ON YES En-25 CINEMA MODE OFF←→ON YES En-25 LONG LIFE PLE AUTO/LOCK 1/LOCK 2/LOCK 3 YES En-25 ORBITER AUTO 1 YES En-26 AUTO 2 YES En-26 MANUAL H-DOT/V-LINE/TIME YES En-26 OFF YES En-26 INVERSE OFF YES En-26 ON WORKING TIME/WAITING TIME YES En-26 WHITE YES En-26 SCREEN WIPER OFF YES En-27 ON WORKING TIME/WAITING TIME/SPEED YES En-27 SOFT FOCUS OFF/1/2/3/4 YES En-27 … … GRAY LEVEL 0← →3← →15 YES En-27 S1/S2
ملخص المحتوى في الصفحة رقم 16
Troubleshooting If the picture quality is poor or there is some other problem, check the adjustments, operations, etc., before requesting service. Symptom Checks Remedy The unit emits a crackling sound. • Are the image and sound normal? • If there are no abnormalities in the image and sound, the noise is caused by the cabinet reacting to changes in temperature. This will not affect performance. Picture is disturbed. • Is a connected component set directly in front or at • Leave some space betwee
ملخص المحتوى في الصفحة رقم 17
Specifications Screen Size 43.5"(H)24.5"(V) inches 1106(H)622(V) mm 1.5" 2.3" (38) diagonal 50" 48.1" (1222) (58) Aspect Ratio 16 : 9 Resolution 1365(H)768(V) pixels 43.5" (1106) Pixel Pitch 0.032"(H)0.032"(V) inches 0.81(H)0.81(V) mm Color Processing 4,096 steps, 68.7 billion colors Signals Synchronization Range Horizontal : 15.5 to 110.0 kHz (automatic : step scan) Vertical : 50.0 to 120.0 Hz (automatic : step scan) 3.8" (96) Input Signals RGB, NTSC (3.58/4.43), PAL (B,G,M,N), PAL60, SECA
ملخص المحتوى في الصفحة رقم 18
Limited Warranty Plasma Monitors NEC Solutions, Inc. (hereinafter NEC Solutions) warrants HOW YOU CAN GET WARRANTY SERVICE 1. To obtain service on your product, consult the dealer from whom this product to be free from defects in material and you purchased the product. workmanship under the following terms and, subject to 2. Whenever warranty service is required, the original dated invoice the conditions set forth below, agrees to repair or replace (or a copy) must be presented as proof of warr
ملخص المحتوى في الصفحة رقم 19
Guide rapide (Modèle à découpe d’image avancée) Pour le fonctionnement de votre moniteur plasma, référez-vous au CD-ROM. Table des matière Manuel d’utilisation sur CD-ROM Recommandations importantes ..................... Fr-2 Le manuel d’utilisation complet est fourni sur le CD-ROM en format PDF (Portable Document Format) et fournit des Installation .................................................. Fr-4 informations détaillées concernant le produit et son utilisation Ventilation requise pour l
ملخص المحتوى في الصفحة رقم 20
Recommandations importantes Pour éviter tout dommage et assurer une utilisation durable: Précaution 1. Utiliser seulement une alimentation en courant de 100– 240 V 50/60 Veuillez lire avec attention ce manuel avant d’utiliser le moniteur à plasma Hz. Toute utilisation prolongée avec un courant supérieur à 100–240 V et le conserver accessible pour s’y référer ultérieurement. risque de diminuer la durée de vie de l’appareil et même de provoquer un incendie. ATTENTION.. 2. Manipuler l’appareil av
