ملخص المحتوى في الصفحة رقم 1
V27m
27” Multimedia Function Display
Operating Instructions
ملخص المحتوى في الصفحة رقم 2
Thank you for choosing an AOC LCD Monitor. It is recommended that you read the contents of this manual carefully before installing and turning on the monitor. Please keep this manual for future reference. Note: Our products are under continuous development and are subject to change without notice. * The monitor may not be an exact match to the illustrations in this manual. But the monitor is the standard. 2
ملخص المحتوى في الصفحة رقم 3
Operating Instructions Content Important safety notes ..............................................................5 Read these notes before operating the device. .................5 Connection and preparation of the monitor...............................7 Parts list.............................................................................7 Installation of the base.......................................................8 Disassembly of the base.......................................
ملخص المحتوى في الصفحة رقم 4
Tips.........................................................................................21 Product Specifications ............................................................22 Supported Resolution .............................................................23 Troubleshooting......................................................................25 Glossary .................................................................................26 China RoHS Regulation Marking Requirements......
ملخص المحتوى في الصفحة رقم 5
Important safety notes Read these notes before operating the device. 1. Read these notes. 2. Follow these notes. 3. Heed all warnings. 4. Operate as per instructions. 5. Do not use this apparatus near water (for example, near the bathtub, kitchen sink, washbasin, washing machine, in a humid basement, or near the swimming pool). If the unit is accidentally splashed, please disconnect the power plug immediately and contact the authorized distributor. 6. Only use a dry cloth for cleanin
ملخص المحتوى في الصفحة رقم 6
16. All servicing must be carried out by professional service personnel. Servicing is required if the device does not work normally, or has been damaged in some way. For example, if the power cord has been damaged, if liquid has been spilled on it, it has been exposed to rain or moisture, or it has been dropped. 17. The product may contain lead or mercury. Environmental factors should be taken into account when you dispose these materials. For disposal or recycling information, contact
ملخص المحتوى في الصفحة رقم 7
Connection and preparation of the monitor Parts list AOC V27m Bracket Base + Screws Cleaning cloth Power cord VGA cable Operating Instructions Warranty card Quick Installation Guide CD-ROM HDMI cable Audio cable Screws 7
ملخص المحتوى في الصفحة رقم 8
Connection and preparation of the monitor Installation of the base Take the monitor and the base out of the carton and assemble them, as shown in the figure below: 1. Place the monitor face down on a soft cloth or pad on the table. Tighten the screws in the base to secure the base and bracket. 2. Inset the base into the hole on the bottom of the monitor. Disassembly of the base Inset a screw driver into the base mounting hole, press it downwards, and pull out the base. 8
ملخص المحتوى في الصفحة رقم 9
Connection and preparation of the monitor Stand the monitor on a stable surface. 1. Choose a position for the monitor that has good ventilation and make sure the ventilation holes on the cover are clear of obstruction. 2. Ensure the LCD monitor has 15cm of clearance on all sides to provide proper ventilation. 3. Do not place the LCD monitor near a radiator or other powered devices. 4. Do not use open flames, such as candles, near the monitor to prevent accidents. 5. Keep the monitor a
ملخص المحتوى في الصفحة رقم 10
Connection and preparation of the monitor Installing the monitor on the wall The monitor conforms to the wall-mounted VESA standard. Please refer to the instructions for product specifications and details. To ensure your own safety and that of the monitor, use only the specified wall-mounting bracket. Please note that wall mounting must be done by a professional technician. When the monitor is mounted on a wall it must be possible to access the connectors at the back. At least 6cm of c
ملخص المحتوى في الصفحة رقم 11
Turning the LCD Monitor On or Off 1. To turn on: Connect the AC power to the monitor. Press the power button on the control panel, and the indicator light will turn blue. After a few seconds the monitor will be operating normally. 2. To turn off: Press the power button on the control panel, to turn the monitor off. 3. Indicator status: ①. In normal operating mode, the monitor indicator light will be blue. ②. In standby mode, the light will be orange. ③. In power-off mode, th
ملخص المحتوى في الصفحة رقم 12
Control Panel and Interface Side panel Volume + Volume - Menu Source Signal Source: Press button to enter the interface of signal source selections and press again to select the source needed. when menu is unavailable on display.Once menu occur, this key is used for confirmation purpose and select to confirm target you needed. Press to enter or exit the menu. Menu: ▲ ▼: When the menu appears on the screen, use these two buttons to select the desired option. Volume: With
ملخص المحتوى في الصفحة رقم 13
Source Interface A device with multiple sources can be connected to your monitor. The figure below shows how to connect. Tip: If you want to wall mount your monitor, all cables must be connected to the monitor connectors first. Whenever an external device is connected to your monitor, please make sure the monitor is turned off. When connecting an external device, connect the cable to the connector with the same color. PC Signal and Component Input PC Audio Input Earphone Jack Vid
ملخص المحتوى في الصفحة رقم 14
Source Interface Video/S-Video Input: Connect the Video or S-Video cable to the DVD player, CD player, Video Recorder, or Camcorder, etc. Audio Input: Connect the audio sources (e.g., computer, DVD player, CD player, Video Recorder, or Camcorder) to the Audio Input connector. Tip: Audio is shared between S-Video and Video. 14
ملخص المحتوى في الصفحة رقم 15
Source Interface Auxiliary Component Input: Connect the auxiliary source audio and video (e.g., computer, DVD player, CD player, Video Recorder, or Camcorder) to the Component Input connector. HDMI Input: Connect the HDMI source (e.g., computer, DVD player, CD player, Video Recorder, or Camcorder) to the HDMI Input connector. 15
ملخص المحتوى في الصفحة رقم 16
Source Interface PC Signal and PC Audio Input: Connect the PC to the PC input connector on the back of the monitor with a VGA cable. Also connect the audio cable between PC Audio Input of the monitor and the PC audio connector. Earphone Jack: Earphones can be connected to the Earphone jack. 16
ملخص المحتوى في الصفحة رقم 17
Using the Menu 1. Press the Menu button to display the menu. 2. Select the menu option to be adjusted using the Up or Down key. 3. Enter the submenu by pressing the VOL Up key. Enable or adjust the function selected by pressing the VOL Up and Down key. The selected option will be highlighted. 4. Press the Menu button again to exit the menu. Source Menu Press Source button to enter the Source menu, including PC, HDMI, Video, S-video, Component. 17
ملخص المحتوى في الصفحة رقم 18
Using the Menu Video Settings Brightness This adjusts the brightness of the screen backlight. The adjustment range is between 0 and 100. Contrast This adjusts the screen contrast. The adjustment range is between 0 and 100. Color Saturation This adjusts the screen color intensity. The adjustment range is between 0 and 100. This control is not available in PC and Component modes. Sharpness This adjusts the sharpness of the picture. The adjustment range is between 0 and 100. Color Th
ملخص المحتوى في الصفحة رقم 19
Using the Menu Audio Settings (applicable to all modes) Sound Quality Switches between the five audio modes. Bass This is used to adjust the bass strength. Treble This is used to adjust the treble strength. Equalizer The sound adjustment range is 0 to 60. During adjustment from 30 to 0, the sound from the right channel will gradually decrease until it disappears. During adjustment from 30 to 60, the sound from the left channel will gradually decrease until it disappears. Reset Resto
ملخص المحتوى في الصفحة رقم 20
Using the Menu Function settings Menu Language This sets the language used for the OSD. There are 24 available languages including English and Simplified Chinese. Aspect Ratio 4:3 16:9 Movie (This control is not available in PC mode.) Panorama (This control is not available in PC mode.) Sleep Timer This sets the interval before your monitor will automatically enter standby mode. OSD Position This changes the OSD menu display position with 9 options available. OSD Transparency This
