ملخص المحتوى في الصفحة رقم 1
®
ViewSonic
CD4220
LCD Commercial Display
IMPORTANT: Please read this User Guide to obtain important
information on installing and using your product in a safe manner, as
well as registering your product for future service. Warranty information
contained in this User Guide will describe your limited coverage from
ViewSonic Corporation, which is also found on our web site at http://
www.viewsonic.com in English, or in specific languages using the
Regional selection box in the upper right c
ملخص المحتوى في الصفحة رقم 2
Content Safety Precautions..................................................................................................5 Package Contents...................................................................................................6 Parts Name and Functions.....................................................................................7 Control Panel............................................................................................................................ 7 T
ملخص المحتوى في الصفحة رقم 3
Compliance Information For U.S.A. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. this equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference t
ملخص المحتوى في الصفحة رقم 4
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in this guide for further instructions. 7. Do not block any ventilati
ملخص المحتوى في الصفحة رقم 5
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/ 95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.1%
ملخص المحتوى في الصفحة رقم 6
Copyright Information ® Copyright © ViewSonic Corporation, 2007. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards As
ملخص المحتوى في الصفحة رقم 7
Safety Precautions FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONITOR: DO NOT REMOVE MONITOR BACK COVER. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. Do not spill any liquids into the c abinet or use your monitor near water. Do not insert objects of any kind into the cabinet sl ots, as they may touc
ملخص المحتوى في الصفحة رقم 8
Package Contents Your new CD4220 monitor box* should contain the following: LCD monitor Power Cord Video Signal Cable User’s Manual in CD Wizard Wireless Remote Control and AAA Batteries Quick Start Guide (A4) LCD monitor Quick Start Guide Video Signal Cable CD Wizard Power cored Remote control & For North America AAA batteries ViewSonic CD4220 6
ملخص المحتوى في الصفحة رقم 9
Parts Name and Functions Control Panel Button Location POWER button ( ) - Switches the power on/off. MUTE button - Switches the audio mute ON/OFF. INPUT button - Acts as SET button with OSD menu.(Toggle switches between [RGB1], [RGB2], [RGB3], [RGB4], [DVD/HD], [VIDEO] and [VIDEO] .) PLUS (+) button - Acts as (+) button to increase the adjustment with OSD menu. Increase the audio output level when the OSD menu is turned off. MINUS (-) button - Acts as (-) button to decrease t
ملخص المحتوى في الصفحة رقم 10
Terminal Panel AUDIO IN 1, 2, 3 To input audio signal from external equipment such as a computer, VCR or DVD player. AUDIO OUT To output the audio signal from the AUDIO IN 1,2 and 3 jack. EXTERNAL CONTROL (mini D-Sub 9 pin) Connect the IN connector with the RS-232C OUT connector of the computer or a multi-connected CD4220 monitor. Connect the OUT connector with the RS-232C IN connector of CD4220 monitor. VIDEO IN/OUT VIDEO IN connector (BNC and RCA): To input a composite video
ملخص المحتوى في الصفحة رقم 11
Wireless Remote Control LEFT button decrease Acts as ( ) button to decrease the adjustment with OSD menu. Small screen which adjusted “PIP” mode moves left. ENTER button Acts as SET button with OSD menu. MENU button To switch the menu mode on/off. DISPLAY button To switch the information OSD on/off. INPUT button Selects from input signal, [RGB1], [RGB2], [RGB3], [DVD/HD], [VIDEO] and [VIDEO]. AUDIO INPUT button Press to change the audio source for each video source. The a
ملخص المحتوى في الصفحة رقم 12
Operating Range for the Remote Control Point the top of the remote control toward the LCD monitor's remote sensor during button operation. Use the remote control within a distance of about 7 m/23 ft. from the front of the LCD monitor's remote control sensor and at a horizontal and vertical angle of within 30° within a distance of about 3 m/10 ft. CAUTION: Important, the remote control system may not function when direct sunlight or strong illumination strikes the remote control sensor
ملخص المحتوى في الصفحة رقم 13
Setup Procedure 1. Determine the installation location CAUTION: DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY YOURSELF. Installing your LCD display must be done by a qualified technician. Contact your dealer for more information. CAUTION: MOVING OR INSTALLING THE LCD MONITOR MUST BE DONE BY TWO OR MORE PEOPLE.Failure to follow this caution may result in injury if the LCD monitor falls. CAUTION: Do not mount or operate the display upside down, face up, or face down. CAUTION: Do not instal
ملخص المحتوى في الصفحة رقم 14
7. Adjust the sound Make adjustments lowering or raising the volume as required. 8. Adjust the screen Make adjustments to the display position or settings if required. 9. Adjust the image Make adjustments to brightness or contrast if required. 10. Recommended Adjustment To reduce the risk of “image persistence”, please adjust the following items based on the application being used. “POWER SAVE”, “SCREEN SAVER”, “DATE AND TIME”, “SCHEDULE”. 11. When CD4220 is installed in portr
ملخص المحتوى في الصفحة رقم 15
How to Mount and Attach Options to the LCD Monitor You can attach mounting accessories to the LCD monitor in one of the following two ways: 1. In the upright position 2. Lay the screen face down Protective Sheet Table Handles Tabletop Stand Lay the protective sheet on a table, which was wrapped around the monitor when it was packaged, beneath the screen surface so as not to scratch the screen face. This device cannot be used or installed without the Tabletop Stand or other mounting
ملخص المحتوى في الصفحة رقم 16
4. To avoid monitor from falling Take measures to prevent the monitor from falling over in case of an earthquake or other disaster to lessen the probability of injury and damage resulting from fall. As shown in the figure, secure the monitor to a solid wall or pillar using rope (commercially available) strong enough to bear the weight of the monitor. (CD4220: approx. 30 kg) When you use screw hooks (commercially available), ring screw hooks, not C-shaped screw hooks (with opening), are reco
ملخص المحتوى في الصفحة رقم 17
Connections Before making connections: First turn off the power of all the attached equipment and make connections. Refer to the user manual included with each separate piece of equipment. Wiring Diagram DVD LCD monitor (second monitor) HD Equipment with PC Digital interface VCR ViewSonic CD4220 15
ملخص المحتوى في الصفحة رقم 18
Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer's screen image. Some video cards may not display an image correctly. Connect the LCD Monitor to a Personal Computer To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal cable (mini D-sub 15 pin to mini D-sub 15 pin). When connecting one or more LCD monitors, use the RGB OUT connector (mini D-sub 15 pin). The
ملخص المحتوى في الصفحة رقم 19
Connecting with Digital Interface Equipment Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard. Connect the LCD Monitor to a Computer with a Digital Output The RGB 1, RGB 1 IN connector accepts a HDMI cable. The RGB 1, RGB 1 IN connector can connec t to HDMI output or DVI-D output of PC. To maintain display quality, use a cable with a qua lity prescribed by DVI standards. (See 29 page “HDMI INPUT
ملخص المحتوى في الصفحة رقم 20
Connecting a DVD Player with component out Connecting your DVD player to your LCD monitor will enable you to display DVD video. Refer to your DVD player owner’s manual for more information. Connect the LCD Monitor to a DVD Player To connect the DVD/HD In connector (BNC) on the LCD moni tor, use a separately available BNC connector cable. You will need a BNC-to-RCA adapter to connect a DVD player with an RCA pin jack to the BNC connector cable (not provided). The AUDIO IN 2 and 3 (both
