ملخص المحتوى في الصفحة رقم 1
Quick Start Guide
NetDirector Console KVM Switch
(8- or 16-Port)
or Rackmount KVM Switch (16-Port)
Models: B020-U08-19-K, B020-U08-19KTAA, B020-U16-19-K or B022-U16
This Quick Start Guide will take you through basic installation, configuration and local
operation. For more detailed information, refer to the Owner’s Manual on the CD-ROM.
This Package Should Consist Of:
• (1) B020-U08-19-K, B020-U08-19KT AA, B020-U16-19-K or B022-U16 KVM Switch
• (8) P778-006 USB/PS2 Combo KVM Cable Kits*
•
ملخص المحتوى في الصفحة رقم 2
1. System Requirements 1.1 Computer • A V GA, SV GA or Multisync computer with an HD15 port Note: The max resolution for the B020-U08-19-K, B020-U08-19KTAA or B020-U16-19-K is 1280 x 1024, and 2048 x 1536 for the B022-U16. The resolutions of the connected computers must not exceed these limits. Either: 1. A mini DIN 6 (PS/2) k e yboard and mouse port. 2. A USB T ype-A port. 1.2 Console* • A V GA, SV GA, or Multisync monitor capable of the highest resolution tha
ملخص المحتوى في الصفحة رقم 3
2. Installation 2.1 Rackmounting Instructions for Console KVMs The NetDirector Console KVM Switch is designed for mounting in a 1U rack system. F or con v enience, a rack mounting kit is included with your KVM for quick installation. The v arious mounting options are e xplained in the sections that follo w: Note: 1. It is recommended that the unit be installed by two people; one to hold it in place and the other to attach it to the rack. 2. The rackmounting
ملخص المحتوى في الصفحة رقم 4
2. Installation 2.3 Single-Station Installation 1. Ensure that power to all the devices to be 5 connected has been turned OFF. 2. Connect the included USB/PS2 Combo Console Cable Kit to the console connector 3 on the back of the unit, and then connect a monitor, mouse and keyboard to the 1 2 appropriate connectors on the cable kit. 4 The distance between the e xternal console and the KVM switch must not e xceed 66 ft (20 m). Note: This step is mandatory for B022-
ملخص المحتوى في الصفحة رقم 5
2. Installation 2.4 Multiple Station (Daisy-Chained) Installation 3. Use a KVM cable kit (described in the Cables section, page 2) to connect the k e yboard, video and mouse ports of a computer to an y a v ailable port on the KVM switch. The distance between the KVM switch and each connected computer must not e xceed 33 ft (10 m). 4. Repeat the abo v e steps for an y additional KVM switches you wish to add to the chain. 5. Po wer up th
ملخص المحتوى في الصفحة رقم 6
3. Basic Operation 3.1 Opening the NetDirector Console KVM The console is located under the top cover. To access the console, slide the console module out and raise the cover. Note: As a safety precaution, to keep the console from accidentally sliding out, the console is locked into the in position. Before you can pull the console module out, you must release it by pushing the catches on the unit’s front panel toward the center of the switch. 3.2 Closing the NetDirector Console KVM To slid
ملخص المحتوى في الصفحة رقم 7
4. OSD (On-Screen Display) Operation continued 4.3 OSD Invocation Sequence Once logged into the KVM switch, you will need to use one of tw o sequences to open the OSD Main Menu; [Scroll Lock, Scroll Lock] or [Ctrl, Ctrl]. The default OSD invocation sequence is [Scroll Lock, Scroll Lock]. Note: When using the [Scroll Lock, Scroll Lock] OSD invocation sequence, you must hold down the [Fn] key, as the [Scroll Lock] key is part of the [Num Lock] key. F1:GOTO F3:SET F5:SKP F7:SCAN X z F2:LIST F4:
ملخص المحتوى في الصفحة رقم 8
5. Warranty 1-YEAR LIMITED WARRANTY TRIPP LITE w arrants its products to be free from defects in materials and w orkmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE's oblig ation under this w arranty is limited to repairing or replacing (at its sole option) an y such defecti v e products. T o obtain service under this w arranty , you must obtain a Returned Material Authorization (RMA) number from TR
