ملخص المحتوى في الصفحة رقم 1
Contents
Introduction........................................................................................................................................1
Notational conventions ..............................................................................................................2
Important notes .................................................................................................................................2
Safety...................................................
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
Introduction Your new LCD (Liquid Crystal Display) monitor S7 offers numerous features and functions, for example: • TFT display (Thin Film Transistor; active matrix) • minimal space requirements thanks to slim casing • optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour purity right into the corners) • high degree of brightness and good contrast • high resolution (1280x1024) for displaying the information content of a conventional 19-inch screen w
ملخص المحتوى في الصفحة رقم 4
Colour monitor S7 Notational conventions The meanings of the symbols and fonts used in this manual are as follows: Pay particular attention to text marked with this symbol. Failure to observe this warning endangers your life, destroys the device, or may lead to loss of data. ! Supplementary information, remarks, and tips follow this symbol. i Ê Text which follows this symbol describes activities that must be performed in the order shown. "Quotation marks" indicate names of chapters or terms. Imp
ملخص المحتوى في الصفحة رقم 5
Colour monitor S7 • In emergencies (e.g. damaged casing, elements or cables, penetration of liquids or foreign matter), switch off the unit, disconnect the power plug and contact your sales outlet or our Help Desk. • The screen background lighting contains mercury. You must observe the applicable handling and disposal safety regulations for fluorescent tubes. • Only qualified technicians should repair the device. Unauthorised opening and incorrect repair may greatly endanger the user (electric s
ملخص المحتوى في الصفحة رقم 6
Colour monitor S7 Manufacturer’s notes Energy Star The Fujitsu Siemens LCD colour monitor S7 is designed to conserve electricity by dropping to less than 4,5 W when it goes into standby, suspend and OFF mode. With this new power management the S7 qualifies for the U.S. Environmental Protection Agency's (EPA) Energy Star Computers award. The EPA estimates that computer equipment uses 5% percent of all business electricity and that this is growing rapidly. If all desktop computers and peripherals
ملخص المحتوى في الصفحة رقم 7
Colour monitor S7 Checking the contents of the consignment Ê Unpack all the individual parts. Ê Check the delivery for damage incurred during transportation. Ê Check whether the delivery agrees with the details in the delivery note. The complete LCD monitor package includes: − one monitor − one data cable − one power cable − one audio cable − a power adapter with power adapter cable − one floppy disk − one Warranty Booklet − this Operating Manual Should you discover that the delivery does not co
ملخص المحتوى في الصفحة رقم 8
Colour monitor S7 preferable viewing sector approx. 90° 65° 0° 30° 60° 30° approx. 90° permissible 65° and viewing sector more permissible viewing sector Position the monitor for Keep ventilated areas clear. Remember to maintain correct optimum viewing. The viewing posture. distance to the monitor should be approximately 50 cm. The typical monitor base allows you to adjust the tilt of the display by 4° forward and by 30° back. Depending on the situation, the use of a swivel arm or wall bracket (
ملخص المحتوى في الصفحة رقم 9
Colour monitor S7 Installation/Deinstallation of the loudspeaker module Installation Ê Align the loudspeaker module that the two hooks slot into the two openings on the bottom of the monitor. Ê Engage the loudspeaker module Deinstallation Ê Press the two push-buttons on the rear of the loudspeaker module and remove it downward. Connecting the monitor Information on the computer connections and interfaces is contained in the operating manual for your computer. Observe the "Safety" in the chapter
ملخص المحتوى في الصفحة رقم 10
Colour monitor S7 Ê Connect the angled connector of the data cable to the D-SUB connector on the monitor (2) and secure the plug-in connection by tightening the safety screws. Ê Connect the even connector of the data cable to the active monitor port on the computer and secure the plug-in connection by tightening the safety screws. If your computer has two monitor ports ("onboard" screen controller and separate graphics card), the monitor port for the separate graphics card is usually active. i Ê
ملخص المحتوى في الصفحة رقم 11
Colour monitor S7 Operation of the monitor 1 = ON/OFF switch with power indicator 1 Switching the monitor on/off The ON/OFF switch (1) is used for switching the monitor on and off. The power indicator glows green when the monitor and computer are switched on. The power indicator glows amber when the monitor does not receive a video signal or is in the energy-saving mode. The power indicator goes off when the monitor is switched off. When you switch the computer system on, you must proceed in th
ملخص المحتوى في الصفحة رقم 12
Colour monitor S7 If your computer detects inactivity (no input) it sends an appropriate signal to the monitor to reduce the power consumption (energy-saving mode). The power indicator of the monitor changes colour to indicate the status change. Once an input is made at the computer the screen contents are redrawn and full power is restored. For detailed information on how energy-saving mode operates refer to the Operating Manual or Technical Manual of the computer. When the monitor is switched
ملخص المحتوى في الصفحة رقم 13
Colour monitor S7 Monitor settings using the OSD menu You can use the buttons on the control panel to set the screen display via an integrated OSD menu (On-Screen-Display). The OSD menu is available in different languages (default setting: English). i MENU DOWN UP AUTO POWER You use this button to switch the OSD menu on and to select the highlighted MENU function. You use these buttons to mark the symbol for a function and can then make DOWN the settings for the selected function. UP The buttons
ملخص المحتوى في الصفحة رقم 14
Colour monitor S7 All possible adjustments of the monitor using the OSD menu are described in the following. Setting the brightness of the display (BRIGHTNESS) Setting the contrast of the display (CONTRAST) Shifting the picture to the left or to the right (H.POSITION) Shifting the picture up or down (V.POSITION) Adjusting the horizontal size (H.SIZE) Setting picture definition and eliminating picture interference (PHASE) Adjusting the colours (COLOR SELECT) Set one of the preset colour temperatu
ملخص المحتوى في الصفحة رقم 15
Colour monitor S7 Removing the monitor base B efore you can use a swivel arm or a wall bracket, you must remove the monitor base: Ê Lay the monitor on its face on a soft surface. The monitor surface is susceptible to scratching! ! Ê Push a screwdriver through the opening on the monitor base. Ê Push the spring with a screwdriver towards the hinge and lift off the monitor base. You can now mount a swivel arm or a wall bracket as per VESA FPMPMI with 75 mm hole spacing. For instructions on how
ملخص المحتوى في الصفحة رقم 16
Colour monitor S7 Notes on ergonomic colour adjustment If you select colours for the display in your application programmes, take note of the information below. The primary colours blue and red on a dark background do not produce the minimum required contrast of 3:1 and are therefore not suitable for continuous text and data entry. When using several colours for characters and background and giving the primary colours full modulation, you can obtain very suitable colour combinations (see the fol
ملخص المحتوى في الصفحة رقم 17
Colour monitor S7 Storable display modes: 19 display modes (11 are preset, 8 are user-defined) Electrical data Video: analogue, positive, 0.7 V , 75 Ω pp Synchronisation: Separate Sync. TTL, positive or negative Horizontal frequency: 31 kHz .... 80 kHz (multi-scanning) Refresh rate: 60 Hz .... 75 Hz Maximum pixel rate: 135 MHz Power supply: 100 V - 240 V Audio output: 2 x 3 W Total power consumption (typical): < 35 W (ON, Normal mode) < 4,5 W in the energy-saving mode (standby mode, suspend mode
ملخص المحتوى في الصفحة رقم 18
Colour monitor S7 Preset operating modes The picture position and size have been set to optimum values at the factory for the operating modes listed above. Depending on the screen controller used, it may be i necessary to adjust the display position and size. If you need to do so, refer to the section entitled "Changing the monitor settings" below. Horizontal frequency Refresh rate Screen resolution 31.47 kHz 70.00 Hz 720 x 400 31.47 kHz 60.00 Hz 640 x 480 37.86 kHz 72.00 Hz 640 x 480 37.50 kHz
ملخص المحتوى في الصفحة رقم 19
Colour monitor S7 D-SUB connector 15 6 10 11 15 Pin Meaning Pin Meaning 1 Video input red 9 +5V Input 2 Video input green 10 Sync. ground 3 Video input blue 11 Ground 4 not assigned 12 DDC-Data 5 DDC ground 13 H. sync 6 Red video ground 14 V. sync 7 Green video ground 15 DDC Clock 8 Blue video ground Trouble shooting Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer and/or with anoth
ملخص المحتوى في الصفحة رقم 20
Colour monitor S7 No display (power indicator lights) Ê Check whether the computer is switched on. Ê Check whether the data cable for the monitor is correctly attached to the monitor port on the computer. Ê Press any key on the computer keyboard – the computer may be in energy saving mode. Ê Alter the brightness and/or contrast until you get a picture. Picture disturbances (vertical and horizontal lines, picture noise) First carry out the AUTO function. Ê If necessary, then adjust the picture de
