ملخص المحتوى في الصفحة رقم 1
DCM Series Digital Cinema Monitor & Crossover System User Manual
DCM 10
DCM 10D
DCM 30
DCM 30D
*TD-000265-00*
TD-000265-00-A
ملخص المحتوى في الصفحة رقم 2
Important Safety Instructions & Explanation of symbols 1- Read these instructions. 2- Keep these instructions. 3- Heed all warnings. 4- Follow all instructions. 5- Do not use this apparatus near water. 6- Clean only with a dry cloth. 7- Do not block any ventilation openings. Install in accordance with QSC Audio Product’s instructions. Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised. 8- Do not inst
ملخص المحتوى في الصفحة رقم 3
FEDERAL COMMUNICATIONS COMMISSION (FCC) INFORMATION NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance to the instructions, may cause harmful interference to radio communica
ملخص المحتوى في الصفحة رقم 4
Introduction Thank you and congratulations on your purchase of the QSC DCM Digital Cin- ema Monitor. This product represents the state-of-the-art for cinema-based signal processing and monitoring functions in a single, integrated system. Table 1: Supported Formats By Model Designed to compliment QSC’s DCA (Digital Cinema Amplifier) Series and DCS (Digital Cinema Speaker) Series products, the DCM optimizes loudspeaker per- DCM 10 DCM 30 formance while facilitating easy cinema sound system wi
ملخص المحتوى في الصفحة رقم 5
System Concepts Installer Features: Provides Monitor and Crossover functions in one box. Minimizes the amount of cabling required. Only 1 cable per amplifier channel pair. Minimizes setup time, particularly in megaplexs with similar rooms. Provides loudspeaker setting database for most common theater loudspeaker brands and models. Indicates if something is wrong with the sound system and provides diagnostic feedback. Emergency bypass allows center channel sound to pass through even if ther
ملخص المحتوى في الصفحة رقم 6
9. Alternate EQ Select- Connecting this terminal to ground with an external switch or relay contact enables an alternate setting of each channel’s para- metric equalization. The alternate settings are made at the time of installation by using the DCM software. This allows for an alternate equalization to be quickly enabled during alternative content or advertising playback. Many “non-feature” film soundtracks are not recorded to X-Curve standards and often sound bright or harsh when played bac
ملخص المحتوى في الصفحة رقم 7
Illustrations- Rear Panels DCM 10 and DCM 10D (Digital Inputs only on DCM 10D model) DCM 30 and DCM 30D (Digital Inputs only on DCM 30D model) 1- Firmware update mode select 2- USB port 3- External loudpseaker connector and select 4- Subwoofer output 5- Alternate equalization select input 6- Auxiliary audio input 7- Hearing impaired output 8- Emergency bypass level controls and switch 9- Main analog input (from cinema processor) 10- Analog/digital input select switch (DCM 10D and DCM 30D only) 1
ملخص المحتوى في الصفحة رقم 8
Hardware Description Front Panel The front panel of the DCM series resembles traditional cinema monitor products. This provides the projectionist a well known and easy to understand interface. Power Switch: The power on/off switch is the master control for the DCM and the amplifiers connected to it. Amplifiers must be connected to the DCM with QSC DataPort cables and amplifier power switches must physically be in the “on” position. The DataPort connection to DCA amplifiers have a standby co
ملخص المحتوى في الصفحة رقم 9
Hardware Description (continued) NOTE: The DCM 10 and DCM 10D have one output for each surround zone and 4 sub outputs. NOTE: All combining of the individual frequency outputs (2-way, 3-way, or 4-way) is done automatically, so all front panel moni- toring is of a full frequency signal. Monitor Volume: The Monitor Volume control is used to adjust the monitoring volume from the front panel loudspeaker. Rotating the control clockwise increases the volume. Rotating the control counter-clockwise dec
ملخص المحتوى في الصفحة رقم 10
Hardware Description (continued) Rear Panel Amplifier DataPorts: Each DataPort provides two channels of audio from the DCM to the QSC amplifier input, as well as current and voltage monitoring of the amp’s loudspeaker outputs. Remote power on/standby control of the amplifier is also provided, allow- ing the DCM to act as a master system power controller. Use only QSC DataPort cables. Custom-length DataPort cables with individually shielded-pair construction are available from QSC’s Technical
ملخص المحتوى في الصفحة رقم 11
Hardware Description (continued) DCM 10/10D DCM 30/30D BYPASS CROSSOVER MODE Switch: The BYPASS CROSSOVER MODE switch routes the center channel input signal through the 2-way or 3-way bypass crossover on the DCM 30/30D. On the DCM 10/10D, the center channel is routed through the 2-way bypass crossover or not processed at all (passive bypass). DCM 10/10D Bypass Crossover Level Adjustment Potentiometers: These are used to adjust the characteristic of the Bypass crossover. The fr
ملخص المحتوى في الصفحة رقم 12
Mounting Rack Mounting When rack mounting the DCM, secure the DCM to the rack rails using four machine screws and washers of the proper size. Most US rack equipment accepts #10-32 machines screws; length used depends upon application. The DCM will require 3-RU (rack units) of space. To rack mount your DCM: 1- select mounting location 2- have an assistant support the DCM in its mounting location 3- secure the two bottom screws first; do not fully tighten yet 4- secure the top two screws, do no
ملخص المحتوى في الصفحة رقم 13
Software Description DCM Manager Windows Software To access the functions of the DCM hardware, you must use QSC’s DCM Manager 2007 control software. A USB cable is used to connect your PC to the DCM. One of the computer’s available USB ports provides communications between the DCM Manager software and the DCM hardware. The PC must meet the minimum System Requirements as outlined in the Introduction section of this manual. The USB cable should be no longer than 5 meters. For longer distances,
ملخص المحتوى في الصفحة رقم 14
Connections Making the required connections to the DCM is simple. Just make sure that you have all of the correct cables. “Mass-termination” connectors are used wherever possible. This reduces installation time from hours to minutes and makes any required connection changes fast, easy, and reliable. Required Cables 1- IEC-style AC power cord (included with the DCM) 2- QSC DataPort cable for every amplifier channel pair (8 to 19 cables depending upon model) 3- Cinema Processor cable (DB25 male
ملخص المحتوى في الصفحة رقم 15
Connections (continued) DataPort The QSC DataPort connection carries input signals, amplifier output monitoring signals, remote amplifier power on/ standby control, amplifier temperature, and more, all on one cable. Each DataPort is clearly marked indicating which channel’s amplifier it should be connected to. Follow the back panel labelling. Connect each DataPort to its respective amplifier’s DataPort. Finger-tighten the retaining screws on the cable connectors; do not overtighten! Conne
ملخص المحتوى في الصفحة رقم 16
Connections (continued) MAIN ANALOG INPUT Pinout Configuration: 25-pin SubD male to 25-pin SubD male. Pin # Signal Description 14 Left - 1 Chassis Ground 15 Chassis Ground 2 Left + MAIN ANALOG INPUT 16 Left Center + 3 Left Center - 17
ملخص المحتوى في الصفحة رقم 17
Connections (continued) DIGITAL INPUT Pinout Configuration: 25-pin SubD male to 25-pin SubD male. Pin # Signal Description 1 (not used) 2 (not used) DIGITAL INPUT 3 (not used) 4 (not used) 5 (not used) 6 (not us
ملخص المحتوى في الصفحة رقم 18
Connections (continued) Powered Subwoofer Screw terminal connections make it possible to send a balanced signal to a powered subwoofer. This signal is balanced and the circuitry is designed for long cable runs from the projection booth to the theater screen. The high-pass filtering and level adjustments are done by the DCM unit. NOTE: There will be no fault analysis or output audio monitoring available for this sub channel. Use balanced audio connections and high-quality, shielded, balanced
ملخص المحتوى في الصفحة رقم 19
System Calibration When installing a typical cinema sound system, most of the calibration involves the Cinema Processor. Refer to the user manual for the Cinema Processor that you are using. WARNING: Turn the Gain Controls on all of the system’s amplifiers all the way down until crossover settings and levels are verified! Connect a PC computer to the USB connector, turn on the DCM unit, start the DCM Manager 2007 software and download a configuration file that corresponds to the equipment ins
ملخص المحتوى في الصفحة رقم 20
Troubleshooting If the DCM Manager program is unable to communicate with the DCM hardware... Verify the USB cable connections. Re-seat each cable-end. Try a known-good USB cable, if possible. Confirm the USB port you are using is operating properly. Windows has provisions for checking hardware in the Windows Control Panel. Refer to the Windows help system for more information. Cycle the power of both the PC and the DCM. If there is no audio from the front panel Monitor Loudspeaker....
