ملخص المحتوى في الصفحة رقم 1
Philips LCD Monitor Electronic User’s Manual
ملخص المحتوى في الصفحة رقم 2
Safety Precautions and Safety and Troubleshooting Information Maintenance FAQs Troubleshooting Safety precautions and maintenance Regulatory Information Other Related Information WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your computer monitor: Operation: Keep t
ملخص المحتوى في الصفحة رقم 3
Do not store or use the LCD monitor in locations exposed to heat, direct sunlight or extreme cold. In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges. ❍ Temperature: 0-40°C 32-95°F ❍ Humidity: 20-80% RH IMPORTANT: Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh applic
ملخص المحتوى في الصفحة رقم 4
Safety and Troubleshooting FAQs (Frequently Asked Questions) General FAQs Screen Adjustments General FAQs Compatibility with Other Peripherals Q: When I install my monitor what should I do if the screen shows 'Cannot display this video LCD Panel Technology mode'? Ergonomics, Ecology and Safety Standards A: Recommended video mode for Philips 24": 1920x1200 @60Hz. Troubleshooting Unplug all cables, then connect your PC to the monitor that you used Reg
ملخص المحتوى في الصفحة رقم 5
Q: What if I get lost when I am making monitor adjustments? A: Simply press the MENU button, the Setup button, then select 'Reset' to recall all of the original factory settings. Q: What is the Auto function? A: The AUTO adjustment key restores the optimal screen position, phase and clock settings by pressing of a single button – without the need to navigate through OSD (On Screen Display) menus and control keys. Note: Auto function is available in selected models only. Q: My Monitor has
ملخص المحتوى في الصفحة رقم 6
A: A protective coating is applied to the surface of the LCD, which is durable to a certain extent (approximately up to the hardness of a 2H pencil). In general, it is recommended that the panel surface is not subject to any excessive shocks or scratches. Q: How should I clean the LCD surface? A: For normal cleaning, use a clean, soft cloth. For extensive cleaning, please use isopropyl alcohol. Do not use other solvents such as ethyl alcohol, ethanol, acetone, hexane, etc. Q:Can I change
ملخص المحتوى في الصفحة رقم 7
A: Yes. Philips LCD monitors have this optional feature. For standard VESA mount holes on the rear cover allows the user to mount the Philips monitor on most of the VESA standard arms or accessories. We recommend to contact your Philips sales representative for more information. RETURN TO TOP OF THE PAGE Screen Adjustments Q: When I install my monitor, how do I get the best performance from the monitor? A:For best performance, make sure your display settings are set at 1920x1200@60Hz for 2
ملخص المحتوى في الصفحة رقم 8
A: Yes, the monitors are Plug-and-Play compatible with Windows® 95, 98, 2000, XP and Vista. Q: What is USB (Universal Serial Bus)? A: Think of USB as a smart plug for PC peripherals. USB automatically determines resources (like driver software and bus bandwidth) required by peripherals. USB makes necessary resources available without user intervention. There are three main benefits of USB. USB eliminates "case anxiety," the fear of removing the computer case to install circuit board cards
ملخص المحتوى في الصفحة رقم 9
principle of blocking light rather than emitting it. Q: What differentiates passive matrix LCDs from active matrix LCDs? A: An LCD is made with either a passive matrix or an active matrix display grid. An active matrix has a transistor located at each pixel intersection, requiring less current to control the luminance of a pixel. For this reason, the current in an active matrix display can be switched on and off more frequently, improving the screen refresh time (your mouse pointer will a
ملخص المحتوى في الصفحة رقم 10
varies with the inlet angle of the light, the viewing angle of a TFT is much narrower than that of a CRT. Usually, the viewing angle refers to the point where the contrast ration is 10. Many ways to widen the viewing angle are currently being developed and the most common approach is to use a wide viewing angle film, which widens the viewing angle by varying the refraction ratio. IPS (In Plane Switching) or MVA (Multi Vertical Aligned) is also used to give a wider viewing angle. Q: Why is
ملخص المحتوى في الصفحة رقم 11
A: Yes. Philips LCD monitors conform to the guidelines of MPR-II and TCO 99/03 standards for the control of radiation, electromagnetic waves, energy reduction, electrical safety in the work environment and recyclability. The specification page provides detailed data on safety standards. Q: After I change new PC, I found this information on screen, how can I do? A: Because you activate Theft Deterrence function in SmartControl II. Please contact IT manager or Philips Service Center. More
ملخص المحتوى في الصفحة رقم 12
Troubleshooting • Safety and Troubleshooting • FAQs This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these • Common Problems solutions, contact Philips customer service representative. • Imaging Problems Common Problems • Regulatory Information • Other Related Information Having this problem Check these items Make sure the power cord is plugged into the power outlet and into the back of the monitor. No P
ملخص المحتوى في الصفحة رقم 13
Press the Auto button. Adjust the image position using the Phase/Clock of Setup in Display position is incorrect OSD Main Controls. Check that the signal cable is properly connected to the Image vibrates on the screen graphics board or PC. Vertical flicker appears Press the Auto button. Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. Horizontal flicker appears Press the Auto button. Eliminate the vertical bars using the Phase/Clock of Setu
ملخص المحتوى في الصفحة رقم 14
The remaining dots are normal characteristic of the liquid Green, red, blue, dark, and white dots crystal used in today s technology. remains Adjust blue "power on" light using the power LED of Setup in Adjust blue "power on" light OSD Main Controls. For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative. RETURN TO TOP OF THE PAGE
ملخص المحتوى في الصفحة رقم 15
TCO'03 Information Regulatory Information Recycling Information for Customers Model ID: 240BW9 Waste Electrical and Electronic Model No: HWB9240I Equipment-WEEE CE Declaration of Conformity TCO'03 Information Energy Star Declaration Federal Communications Commission (FCC) Notice (U.S. Congratulations! Only) The display you have just purchased carries the TCO'03 Displays label. This FCC Declaration of Conformity means that your display is designed, manufactured a
ملخص المحتوى في الصفحة رقم 16
www.tcodevelopment.com RETURN TO TOP OF THE PAGE Recycling Information for Customers Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back initiatives and recycling p
ملخص المحتوى في الصفحة رقم 17
This marking on the product or on its packaging illustrates that, under European Directive 2002/96/EG governing used electrical and electronic appliances, this product may not be disposed of with normal household waste. You are responsible for disposal of this equipment through a designated waste electrical and electronic equipment collection. To determine the locations for dropping off such waste electrical and electronic, contact your local government office, the waste disposal organizat
ملخص المحتوى في الصفحة رقم 18
This monitor is equipped with a function for saving energy which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer which supports VESA DPMS. Time settings are adjusted from the system unit by software. VESA State LED Indicator Power Consumption Normal operation ON (Active) Blue < 85 W (typ.) Power Saving Alternative 2 < 1 W (110V) Sleep Blue Blinking One step < 2 W (220V) Switch Off Off < 1 W ® As an ENERGY ST
ملخص المحتوى في الصفحة رقم 19
THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE- CAUSING EQUIPMENT REGULATIONS. RETURN TO TOP OF THE PAGE FCC Declaration of Conformity Trade Name: Philips Philips Consumer Electronics North America P.O. Box 671539 Responsible Party: Marietta , GA 30006-0026 1-888-PHILIPS (744-5477) Declaration of Conformity for Products Marked with FCC Logo, United States Only This device complies with Part 15 of the FCC Rules. Operation is subject to the follo
ملخص المحتوى في الصفحة رقم 20
Toutes modifications n'ayant pas reçu l'approbation des services compétents en matière de conformité est susceptible d'interdire à l'utilisateur l'usage du présent équipement. N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques. CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA. RETURN TO TOP OF THE PAGE EN 55022 Compliance (Czech Republic Only) RETURN TO TOP OF THE PAGE MIC
