ملخص المحتوى في الصفحة رقم 1
e-Manual
Philips LCD Monitor Electronic User’s Manual
file:///D|/My%20documents/dfu/150V5/english/150v5/index.htm [4/14/2004 11:08:26 AM]
ملخص المحتوى في الصفحة رقم 2
Safety and Troubleshooting Information •Safety Safety and Troubleshooting Information Precautions and Maintenance • Installation Locations Safety precautions and maintenance • FAQs • Troubleshooting WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, • Regulatory electrical hazards and/or mechanical hazards. Information • Other Related Information Read and follow these instructions
ملخص المحتوى في الصفحة رقم 3
Safety and Troubleshooting Information ● Do not store or use the LCD monitor in locations exposed to heat, direct sunlight or extreme cold. ● Avoid moving the LCD monitor between locations with large temperature differences. Choose a site that falls within the following temperature and humidity ranges. ❍ Temperature: 5-40°C 41-104°F ❍ Humidity: 20-80% RH ● Do not subject the LCD monitor to severe vibration or high impact conditions. Do not place the LCD monitor in the tru
ملخص المحتوى في الصفحة رقم 4
About This Manual • About This Guide About This Manual • Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips LCD Monitor. It describes the LCD monitor's features, setup, operation and other important information. Its contents are identical to the information in our printed version. It includes the following sections: ● Safety and Troubleshooting Information provides tips and solutions for common pr
ملخص المحتوى في الصفحة رقم 5
About This Manual NOTE: This icon indicates important information and tips that help you make better use of your computer system. CAUTION: This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data. WARNING: This icon indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may not be accompanied by an icon. In such cases, the specific presentation of the warning is
ملخص المحتوى في الصفحة رقم 6
Product Information • Product Features •Technical Product Information Specifications •Resolution & Preset Modes •Philips Pixel Product Features Defect Policy •Automatic 150V5 Power Saving •Physical ● Best Total Cost of Ownership solution Specification ❍ Lower power consumption ~ Less cost: up to 20% power savings than industry average •Pin ❍ Kensington anti-theft lock ~ Added security prevents theft by locking monitor in place Assignment ● Outstanding front
ملخص المحتوى في الصفحة رقم 7
Product Information Horizontal Frequency 30 kHz-62 kHz VIDEO • Video dot rate 80 MHz • Input impedance - Video 75 ohm - Sync 5K ohm • Input signal levels 700m Vpp Separate sync • Sync input signal Composite sync Sync on green • Sync polarities Positive and negative XGA Hsync 48- 61 kHz, Vsync 60 - 76 Hz (N.I.) SVGA Hsync 35- 50 kHz, Vsync 56 - 75 Hz (N.I.) • Input Frequency VGA Hsync 31- 38 kHz, Vsync 60 - 76 Hz (N.I.) • Video interface Analog (D-Sub) Optical characteristics • Contrast ratio
ملخص المحتوى في الصفحة رقم 8
Product Information RETURN TO TOP OF THE PAGE Resolution & Preset Modes • Maximum 1024 x 768 at 75 Hz • Recommended 1024 x 768 at 60 Hz 14 user definable modes 14 factory preset modes: H. freq (kHz) Resolution V. freq (Hz) 31.469 640*350 70.086 31.469 720*400 70.087 31.469 640*480 59.940 35.000 640*480 67.000 37.861 640*480 72.809 37.500 640*480 75.000 35.156 800*600 56.250 37.879 800*600 60.317 48.077 800*600 72.188 46.875 800*600 75.000 49.700 832*624 75.000 48.363 1024*768 60.004 56.476 1024
ملخص المحتوى في الصفحة رقم 9
Product Information Power Management Definition VESA Mode Video H-sync V-sync Power Used LED color ON Active Yes Yes < 20 W Green OFF Blanked No No < 2 W Amber ® ® This monitor is ENERGY STAR compliant. As an ENERGY STAR Partner, PHILIPS has ® determined that this product meets the ENERGY STAR guidelines for energy efficiency. RETURN TO TOP OF THE PAGE Physical Specifications • Dimension (WxHxD) * 341 x 317.4 x 140 mm (incl. Pedestal) • Weight 3.0 Kg • Tilt -5° ~ 20° • Power suppl
ملخص المحتوى في الصفحة رقم 10
Product Information The 15-pin D-sub connector (male) of the signal cable: Pin Pin Assignment Assignment No. No. Red video input DDC +5V 1 9 Green video input/SOG Logic ground 2 10 3 Blue video input 11 Ground 4 Ground 12 Serial data line (SDA) 5 Ground 13 H. Sync / H+V 6 Red video ground 14 V. Sync 7 Green video ground 15 Data clock line (SCL) 8 Blue video ground RETURN TO TOP OF THE PAGE Product Views Follow the links to see various views of the monitor and its components. Front Vie
ملخص المحتوى في الصفحة رقم 11
Product Information Physical Function 1) Tilt RETURN TO TOP OF THE PAGE file:///D|/My%20documents/dfu/150V5/english/150v5/product/product.htm (6 of 6) [4/14/2004 11:08:34 AM]
ملخص المحتوى في الصفحة رقم 12
Installing Your LCD Monitor Installing Your LCD Monitor Front View • Produt Description Connecting • Front View Product Description to Your PC Getting • Started Optimizing • Performance UP and DOWN buttons are used when adjusting the OSD of your monitor. OK button which when pressed will take you to the OSD controls. POWER button switches your monitor on. RETURN TO TOP OF THE PAGE Rear View file:///D|/My%20documents/dfu/150V5/english/150v5/install/install
ملخص المحتوى في الصفحة رقم 13
Installing Your LCD Monitor 1 Kensington anti-thief lock 2 VGA input 3 DC power input RETURN TO TOP OF THE PAGE Optimizing Performance ● For best performance, ensure that your display settings are set at 1024x768, 60Hz. Note: You can check the current display settings by pressing the 'OK' button once. Go into the Product Information. The current display mode is shown on the item called RESOLUTION. RETURN TO TOP OF THE PAGE file:///D|/My%20documents/dfu/150V5/english/150
ملخص المحتوى في الصفحة رقم 14
On-Screen Display On-Screen Display •Description of the On- Screen Display Description of the On Screen Display Making adjustments • What is the On-Screen Display? in the OSD menu This is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance of the monitors directly through an on-screen instruction window. The user interface provides user-friendliness and ease-of-use when operating the monitor. Basic and simple instruction on the contr
ملخص المحتوى في الصفحة رقم 15
On-Screen Display Making adjustments in the OSD menu Auto Setup To perform Auto Setup functions, follow these steps: 1. Bring up the OSD "Main Menu". 2. The 'Auto' icon is highlighted. 3. Use the key to select and execute Auto Setup. After Auto Setup is completed, the following message appears: If the image looks correct, choose Yes. OR If the image requires further adjustment, choose No. The 'Phase' bar will appear for manual adjustment. Adjust phase using the or buttons. When all tex
ملخص المحتوى في الصفحة رقم 16
On-Screen Display RETURN TO TOP OF THE PAGE Making adjustments in the "Management" submenu To make adjustment in the "Management" submenu, follow these steps: 1. Bring up the OSD "Main Menu." 2. Use the or buttons to move forward or backward to the management icon and highlight it. 3. Use key to enter the "Management" submenu. Four items will be displayed for selection. To adjust 'Brightness' settings, use the or buttons. The graphic bar and the numerical value in the right corner wil
ملخص المحتوى في الصفحة رقم 17
On-Screen Display NOTE: We recommend you perform Auto Setup before adjusting the contrast setting. To adjust the horizontal position ('H. position') of the image, use the or buttons. The graphic bar and the numerical value in the right corner will change in accordance with selected settings. To adjust the vertical position ('V. position') of the image, use the or buttons. The graphic bar and the numerical value in the right corner will change in accordance with selected settings. file:///D
ملخص المحتوى في الصفحة رقم 18
On-Screen Display Select 'Exit' to leave the "Management" submenu and return to the "Main Menu." RETURN TO TOP OF THE PAGE Making adjustments in the "Clock/Phase" submenu To make adjustments in the "Clock/Phase" submenu, follow these steps: 1. Bring up the OSD "Main Menu". 2. Use or buttons to move forward or backward to the clock/phase icon and highlight it. file:///D|/My%20documents/dfu/150V5/english/150v5/osd/osddesc.htm (5 of 12) [4/14/2004 11:08:39 AM]
ملخص المحتوى في الصفحة رقم 19
On-Screen Display 3. Use the key to enter the "Clock/Phase" submenu. Two items will be displayed for your selection. To adjust 'Clock' settings, use or buttons. The graphic bar and the numerical value in the right corner will change in accordance with selected settings. NOTE: We recommend you perform Auto Setup first, adjusting clock settings only if the image looks incorrect. To adjust 'Phase' settings, use the or buttons. The graphic bar and the numerical value in the right corner
ملخص المحتوى في الصفحة رقم 20
On-Screen Display RETURN TO TOP OF THE PAGE Making adjustments in the "Color" submenu To make adjustments in the "Color" submenu, follow these steps: 1. Bring up the OSD "Main Menu". 2. Use the or buttons to move forward or backward to the color icon and highlight it. 3. Use the key to enter the "Color" submenu. Three items will be displayed for your selection. To adjust 'Color Temp' settings, use the or buttons to select one of the three setting options. When adjustments are complete
