ملخص المحتوى في الصفحة رقم 1
MultiSync EX201W
MultiSync EX231W
MultiSync EX231Wp
User’s Manual
ملخص المحتوى في الصفحة رقم 2
Index Warning, Caution .........................................................................................................................English-1 Registration Information ...............................................................................................................English-1 Recommended use ......................................................................................................................English-3 Contents................................................
ملخص المحتوى في الصفحة رقم 3
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PL
ملخص المحتوى في الصفحة رقم 4
Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60950-1. FCC Information 1. Use the attached specified cables with the MultiSync EX201W (L200UF)/MultiSync EX231W (L230NW)/MultiSync EX231Wp (L230UH) color monitor so as not to interfere with radio and televisio
ملخص المحتوى في الصفحة رقم 5
Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC LCD COLOUR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the cabine
ملخص المحتوى في الصفحة رقم 6
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 40 cm and no further away than 70 cm from your eyes. The optimal distance is 50 cm. • Rest
ملخص المحتوى في الصفحة رقم 7
Setup Manual Contents Your new NEC MultiSync LCD monitor box* should contain the following: • MultiSync LCD Monitor • Power Cord • AC Adapter • Stand • Base Stand • AC Adapter Holder • Cable Holder • Video Signal Cable (15-pin mini D-SUB male to DVI-A) • Video Signal Cable (DVI-D to DVI-D) • USB Cable • Setup Manual • CD-ROM (includes complete User’s Manual in PDF format). CD-ROM AC Adapter 1 Power Cord* Stand DVI-D to DVI-D Base Stand 15-pin mini D-SUB male to DVI-A Cable Holder AC Adapter Hol
ملخص المحتوى في الصفحة رقم 8
Quick Start To attach the Base to the LCD stand: 1. Place monitor face down on a non-abrasive surface (Figure 1). NOTE: Handle with care when placing monitor face down to avoid damaging the front control keys. 2. Put the upper hooks of the stand in the slot of the monitor then push stand into monitor in direction of the arrow as shown in Figure 1 and confirm that the stand is locked. NOTE: Handle with care when pulling the stand. 3. Attach the base stand to stand and turn the connecting screw at
ملخص المحتوى في الصفحة رقم 9
A Type A Type B Type Figure B.1a Figure B.2 Figure B.3 NOTE: 1. Please use a DisplayPort cable with a DisplayPort certified logo. 2. The DisplayPort connector does not supply power to the connected component. 3. When removing the DisplayPort cable, hold down the top button to release the lock. 7. Connect the power cord to the power outlet (Figure C.1). NOTE: Please refer to Caution section of this manual for proper selection of AC power cord. 8. Turn on the monitor with the front power key and t
ملخص المحتوى في الصفحة رقم 10
Tilt and Swivel Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1). NOTE: Handle with care when tilting the monitor screen. Figure TS.1 Screen Rotation Before rotating, the screen must be raised to the highest level to avoid running into the desk or pinching your fingers. To raise the screen, with one hand, grip the top of the display by the handle using the other hand to grip the bottom. Lift up to the highest position (Figure RL.1). T
ملخص المحتوى في الصفحة رقم 11
Flexible Arm Installation This LCD monitor is designed for use with a flexible arm. To mount the monitor to a flexible arm: 1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand. 2. Using 4 screws attach the arm to the monitor (Figure F.1). NOTE: 1. The LCD monitor should only be used with an approved arm (e.g. GS mark). To meet the safety requirements, the monitor must be mounted to an arm, which ensures the necessary stability under consideration of the weight
ملخص المحتوى في الصفحة رقم 12
Controls OSD (On-Screen Display) control keys on the front of the monitor function as follows: You can access the OSD menu by touching your finger on any of the control keys. To change signal input, touch the INPUT (SELECT) Key. To change ECO MODE, touch the ECO (RESET) Key. NOTE: OSD must be closed in order to change signal input. RESET UP DOWN SELECT EXIT LEFT RIGHT Button Menu 1 Ambibright Sensor Detects the level of ambient lighting allowing the monitor to make adjustments to various setting
ملخص المحتوى في الصفحة رقم 13
Simple MENU BRIGHTNESS Adjusts the overall image and background screen brightness. If ECO MODE is set to 1 or 2, a bar for CARBON FOOTPRINT will appear. ECO MODE can be set by FULL MENU. AUTO ADJUST (Analog input only) Automatically adjusts the Image Position, Horizontal Size, Fine and Contrast settings. FULL MENU Switches to FULL MENU. See page 11 for detailed information. HUMAN SENSOR Shows current human sensing setting. See page 12 for more details. This function is adjusted threshold by FULL
ملخص المحتوى في الصفحة رقم 14
ECO MODE Decreases the power consumption by reducing the brightness level. OFF: Sets brightness variable from 0% to 100%. (ECO MODE) 1: Sets brightness variable range from 0% to 80%. This setting can adjust brightness to a range in which power is reduced to meet Energy Star measurement conditions. (ECO MODE) 2: Sets brightness variable range from 0% to 40%. This setting can adjust brightness to a range in which power is reduced by 30% compared to the maximum brightness setting. When this functio
ملخص المحتوى في الصفحة رقم 15
DV MODE Dynamic Visual Mode allows you to select from the following settings: STANDARD: Standard setting. TEXT: Setting that makes letters and lines crisp; best suited for basic word processing and spreadsheets. MOVIE: Setting that boosts dark tones; best suited for movies. GAMING: Setting that boosts whole tones; best suited for games that use vivid, colorful images. PHOTO: Setting that optimizes contrast; best suited for still images. DYNAMIC: Setting that adjusts the brightness by detecting t
ملخص المحتوى في الصفحة رقم 16
Tools DVI SELECTION: This function selects the DVI input mode. When the DVI selection has been changed, you must restart your computer. DIGITAL: DVI digital input is available. ANALOG: DVI analog input is available. VIDEO DETECT: Selects the method of video detection when more than one computer is connected. FIRST: The video input has to be switched to “FIRST” mode. When current video input signal is not present, then the monitor searches for a video signal from the other video input port. If th
ملخص المحتوى في الصفحة رقم 17
ECO Information CARBON SAVINGS: Displays the estimated carbon savings information in kg. COST: Displays the electricity cost savings in balance. INTEGRAL POWER: Displays multiple values of the power consumption. CARBON CONVERT SETTING: Adjusts the carbon footprint factor in the carbon saving calculation. This initial setting is based on the OECD (2008 Edition). CURRENCY SETTING: Displays electricity pricing in 6 currency units. CURRENCY CONVERT SETTING: Displays electricity savings in kW/hour (U
ملخص المحتوى في الصفحة رقم 18
Specifications - EX201W Monitor Specifications MultiSync EX201W Notes LCD Module Diagonal: 50.80 cm/20.0 inches Active matrix; thin film transistor (TFT) liquid Viewable Image Size: 50.80 cm/20.0 inches crystal display (LCD); 0.277 mm dot pitch; 2 white luminance; 1000:1 contrast ratio, Native Resolution (Pixel Count): 1600 x 900 250 cd/m typical (25000:1 Contrast ratio, Dynamic). Input Signal DVI: DVI-I Connector: Digital RGB DVI (HDCP) Analog RGB 0.7 Vp-p/75 ohm Sync Separate sync.TTL level P
ملخص المحتوى في الصفحة رقم 19
Specifications - EX231W Monitor Specifications MultiSync EX231W Notes LCD Module Diagonal: 58.42 cm/23.0 inches Active matrix; thin film transistor (TFT) liquid Viewable Image Size: 58.42 cm/23.0 inches crystal display (LCD); 0.265 mm dot pitch; 2 white luminance; 1000:1 contrast ratio, Native Resolution (Pixel Count): 1920 x 1080 250 cd/m typical (25000:1 Contrast ratio, Dynamic). Input Signal DVI: DVI-I Connector: Digital RGB DVI (HDCP) Analog RGB 0.7 Vp-p/75 ohm Sync Separate sync.TTL level
ملخص المحتوى في الصفحة رقم 20
Specifications - EX231Wp Monitor Specifications MultiSync EX231Wp Notes LCD Module Diagonal: 58.42 cm/23.0 inches Active matrix; thin film transistor (TFT) liquid Viewable Image Size: 58.42 cm/23.0 inches crystal display (LCD); 0.265 mm dot pitch; 2 white luminance; 3000:1 contrast ratio, Native Resolution (Pixel Count): 1920 x 1080 250 cd/m typical (25000:1 Contrast ratio, Dynamic). Input Signal DVI: DVI-I Connector: Digital RGB DVI (HDCP) Analog RGB 0.7 Vp-p/75 ohm Sync Separate sync.TTL leve
