ملخص المحتوى في الصفحة رقم 12
Figure S.1 4 3 1 2 Figure S.4 Figure S.2 Figure S.3 Caution: Please use the attached screws (4pcs) when mounting. To fulfil the safety requirements the monitor must be mounted to an arm which guaranties the necessary stability under consideration of the weight of the monitor. The LCD monitor shall only be used with an approved arm (e.g. GS mark). English-11 English
ملخص المحتوى في الصفحة رقم 13
Controls OSM (On-Screen-Manager) Controls The OSM controls on the front of the monitor function as follows: To access OSM press any of the control buttons ( , , -, +). To change DVI/D-SUB signal input, press the NEXT button. To rotate OSM between Landscape and Portrait modes, press the RESET button. NOTE: OSM menu must be closed in order to change signal input and to rotate. Control Menu EXIT Exits the OSM controls. Exits to the OSM main menu. Moves the highlighted area left/right to select cont
ملخص المحتوى في الصفحة رقم 14
Brightness/Contrast Controls BRIGHTNESS Adjusts the overall image and background screen brightness. CONTRAST Adjusts the image brightness in relation to the background. AUTO ADJUST (Analog input only) Adjusts the image displayed for non-standard video inputs. Auto Adjust (Analog input only) Automatically adjusts the Image Position, the H. Size and Fine setting. Position Controls (Analog input only) LEFT/RIGHT Controls Horizontal Image Position within the display area of the LCD. DOWN/UP Controls
ملخص المحتوى في الصفحة رقم 15
R,Y,G,C,B,M,S Increases or decreases Red, Yellow, Green, Cyan, Blue, Magenta and Saturation depending upon which is selected. The change in color will appear on screen and the direction (increase or decrease) will be shown by the color bars. sRGB sRGB mode dramatically improves the color fidelity in the desktop environment by a single standard RGB color space. With this color supported environment, the operator could easily and confidently communicate colors without further color management over
ملخص المحتوى في الصفحة رقم 16
ASPECT The image is expanded without changing the aspect ratio. OFF The image is not expanded. CUSTOM (Digital input and Resolution of 1280 x 1024 only) Select one of seven expansion rates. In this mode the resolution may be low and there may be blank areas. This mode is for use with special video cards. VIDEO DETECT Selects the method of video detection when more than one computer is connected. FIRST DETECT The video input has to be switched to “FIRST DETECT” mode. When current video input sign
ملخص المحتوى في الصفحة رقم 17
DVI SELECTION This function selects the DVI input mode. When the DVI selection has been changed, you must restart your computer. DIGITAL DVI digital input is available. ANALOG DVI analog input is available. Tools 2 LANGUAGE OSM control menus are available in seven languages. OSM POSITION You can choose where you would like the OSM control image to appear on your screen. Selecting OSM Location allows you to manually adjust the position of the OSM control menu left, right, down or up. OSM TURN OFF
ملخص المحتوى في الصفحة رقم 18
RESOLUTION NOTIFIER This optimal resolution is 1280 x 1024. If ON is selected, a message will appear on the screen after 30 seconds, notifying you that the resolution is not at 1280 x 1024. FACTORY PRESET Selecting Factory Preset allows you to reset all OSM control settings back to the factory settings. The RESET button will need to be held down for several seconds to take effect. Individual settings can be reset by highlighting the control to be reset and pressing the RESET button. Information
ملخص المحتوى في الصفحة رقم 19
OUT OF RANGE: This function gives a recommendation of the optimized resolution and refresh rate. After the power is turned on or there is a change of input signal or the video signal doesn’t have proper timing, the Out Of Range menu will appear. CHECK CABLE: This function will advise you to check all Video Inputs on the monitor and computer to make sure they are properly connected. NOTE: If “ CHANGE DVI SELECTION” is displayed, switch to DVI SELECTION. English-18
ملخص المحتوى في الصفحة رقم 20
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the cabinet
ملخص المحتوى في الصفحة رقم 1
MultiSync LCD1850X
User’s Manual
ملخص المحتوى في الصفحة رقم 2
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK • DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REF
ملخص المحتوى في الصفحة رقم 3
Declaration Declaration of the Manufacturer We hereby certify that the colour monitor MultiSync LCD1850X (LH-18S02-1) MultiSync LCD1850X (LH-18S02-BK1) is in compliance with Council Directive 73/23/EEC: – EN 60950 Council Directive 89/336/EEC: – EN 55022 – EN 61000-3-2 – EN 61000-3-3 – EN 55024 and marked with NEC-Mitsubishi Electric Visual Systems, Corp. MS Shibaura Bldg., 13-23, Shibaura 4-chome, Minato-Ku, Tokyo 108-0023, Japan Power consumption of the monitor is less than 3 W when in power-s
ملخص المحتوى في الصفحة رقم 4
For the Customer to use in U.S.A. or Canada Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouiller du Canada. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CSA C22.2 #950. Ce produit porte la marque ‘C-UL’ et se conforme au
ملخص المحتوى في الصفحة رقم 5
2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interferenc
ملخص المحتوى في الصفحة رقم 6
Contents Your new NEC MultiSync LCD monitor box* should contain the following: • MultiSync LCD1850X monitor with tilt base • Power Cords • Video Signal Cable (15-pin mini D-SUB male to DVI-A) • Video Signal Cable (DVI-D to DVI-D Cable) • User’s Manual • NEC LCD Setup Software, Pivot Software, User’s Manual and other helpful files. To see the User‘s Manual, Acrobat Reader 4.0 must be installed on your PC. * Remember to save your original box and packing material to transport or ship the monitor
ملخص المحتوى في الصفحة رقم 7
Quick Start To attach the MultiSync LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC or Mac with DVI digital output: Connect the DVI-D to DVI-D signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws. For the PC with Analog output: Connect the 15-pin mini D-SUB to DVI-A signal cable to the connector of the display card in your system (Figure A.2). For the Mac: Connect the MultiSync Macintosh cab
ملخص المحتوى في الصفحة رقم 8
6. To complete the setup of your MultiSync LCD monitor, use the following OSM controls: • Auto Adjust Contrast (Analog input only) • Auto Adjust (Analog input only) Refer to the Controls section of this User’s Manual for a full description of these OSM controls. NOTE: If you have any problems, please refer to the Troubleshooting section of this User’s Manual. NOTE: Refer to User’s Manual in the NEC LCD Setup Software CD case for installation and operation of this software. Figure A.1 Figure A.2
ملخص المحتوى في الصفحة رقم 9
Input1 Input2 Figure D.1 Figure C.1 Vacation Switch Power Button Figure E.1 English-8
ملخص المحتوى في الصفحة رقم 10
Raise and Lower Monitor Screen The monitor may be raised or lowered in either Portrait or Landscape mode. To raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height (Figure RL.1). Screen Rotation Before rotating, the screen must be raised to the highest level to avoid knocking the screen on the desk or pinching your fingers. To raise the screen, place hands on each side of the monitor and lift up to the highest position (Figure RL.1). To rotate scre
ملخص المحتوى في الصفحة رقم 11
5. Reverse this process to reattach stand. NOTE: Use only VESA-compatible alternative mounting method. Figure RL.1 Figure R.1 Figure TS.1 English-10
