ملخص المحتوى في الصفحة رقم 1
ملخص المحتوى في الصفحة رقم 2
Index Warning .................................................................................................................... 1 Contents ................................................................................................................. 2 Quick Start ............................................................................................................. 3 Controls .............................................................................................................
ملخص المحتوى في الصفحة رقم 3
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PL
ملخص المحتوى في الصفحة رقم 4
Contents ® Your new NEC MultiSync LCD monitor box* should contain the following: ™ • MultiSync LCD1720M monitor with tilt / swivel base • Power Cord • Video Signal Cable • Audio Cable • User’s Manual Power Cord Video Signal Cable Audio Cable User’s Manual * Remember to save your original box and packing material to transport or ship the monitor. 2
ملخص المحتوى في الصفحة رقم 5
Quick Start ® To attach the MultiSync LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC: Connect the 15-pin mini D-SUB of the appropriate signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws. ™ For the Mac: Connect the MultiSync LCD1720M Macintosh cable adapter to the computer (Figure B.1). Attach the 15-pin mini D-SUB end of the appropriate signal cable to the MultiSync LCD1720M Macintosh cab
ملخص المحتوى في الصفحة رقم 6
continued continued Quick Start –continued continued continued Macintosh Cable Adapter (not included) Note: Some Macintosh systems do not require a Macintosh Cable Adapter. Figure A.1 Figure B.1 Figure C.1 Figure D.1 4
ملخص المحتوى في الصفحة رقم 7
Quick Start –continued Figure E.1 Power Switch Figure F.1 5
ملخص المحتوى في الصفحة رقم 8
Quick Start –continued Tilt and swivel Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1). Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1.Disconnect all cables. Figure TS.1 2.Place monitor face down on a non-abrasive surface. Insert a screw driver (or similar object) into the hole on the bottom of stand. As shown in the picture, hold the stand cover in hand and lift up gradually by the stic
ملخص المحتوى في الصفحة رقم 9
Quick Start –continued 6. This LCD monitor is designed for use with a flexible arm. Please use the attached screws (4pcs) as shown in the picture when installing. To meet the safety requirements, the monitor must be mounted to an arm which guaranties the necessary stability under consideration of the weight of the monitor. The LCD monitor shall only be used with an approved arm (e.g. GS mark). Replace screws Thickness of bracket (arm) 2.0~3.2mm Tighten all screws. 100mm Specifications 4-SCREWS (
ملخص المحتوى في الصفحة رقم 10
Controls OSM™ (On-Screen Manager) control buttons on the front of the monitor function as follows: To access OSM menu, press any of the control buttons ( , , –, +, NEXT ). Menu EXIT Exits the OSM controls. Exits to the OSM main menu. CONTROL / Moves the highlighted area left/right to select control menus. Moves the highlighted area up/down to select one of the controls. ADJUST –/+ Moves the bar left/right to increase or decrease the adjustment. Active Auto Adjust function. Enter the Sub Menu
ملخص المحتوى في الصفحة رقم 11
Controls –continued ® AccuColor Control Systems Five color presets select the desired color setting. Each color setting is adjusted at the factory. R,G,B : Increases or decreases Red, Green or Blue color depending upon which is selected. The change in color will appear on screen and the direction (increase or decrease) will be shown by the bars. Tools ™ LANGUAGE: OSM control menus are available in seven languages. EXPANSION MODE: Sets the zoom method. FULL : The image is expanded to 1280 x 102
ملخص المحتوى في الصفحة رقم 12
Controls –continued Information DISPLAY MODE: Indicates the current display resolution and frequency setting of the monitor. MONITOR INFO: Indicates the model and serial numbers of your monitor. ™ OSM Warning: OSM Warning menus disappear with Exit button. NO SIGNAL: This function gives a warning when there is no signal present. After power is turned on or when there is a change of input signal or video is inactive, the No Signal window will appear. RESOLUTION NOTIFIER: This function gives a warn
ملخص المحتوى في الصفحة رقم 13
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING ® THE MULTISYNC LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the cabin
ملخص المحتوى في الصفحة رقم 14
Recommended Use –continued CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 16 inches and no further away than 26 inches from your eyes. Th
ملخص المحتوى في الصفحة رقم 15
Specifications ® ™ Monitor MultiSync LCD1720M Notes Specifications Monitor LCD Module Diagonal: 17.0 inch Active matrix; thin film transistor (TFT) Viewable Image Size: 17.0 inch liquid crystal display (LCD); 0.264 mm pixel 2 Native Resolution (Pixel Count): 1280 x 1024 pitch; 200cd/m white luminence; 350:1 contrast ratio, typical Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Sync: Separate sync. TTL Level Horizontal sync. Positive/Negative Vertical sync. Positive/Negative Display Colors Analog in
ملخص المحتوى في الصفحة رقم 16
Features Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. The monitor’s small footprint and low weight allow it to be moved or transported easily from one location to another. ® AccuColor Control Systems: Allows you to adjust the colors on your screen and customize the color accuracy of your monitor to a variety of standards. ™ OSM (On-Screen Manager) Controls: Allow you to quickly and easily adjust all element
ملخص المحتوى في الصفحة رقم 17
Troubleshooting No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Front Power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.) • Check the monitor and your display card with respect to compatibility and recom
ملخص المحتوى في الصفحة رقم 18
Troubleshooting –continued Selected resolution is not displayed properly • Use OSM Display Mode to enter Information menu and confirm that the appropriate resolution has been selected. If not, select corresponding option. No Sound • Check to see if speaker cable is properly connected. • Check to see if mute is activated. • Check to see if volume in OSM is set at minimum. 16
ملخص المحتوى في الصفحة رقم 19
References • BBS (978) 742-8706 NEC-Mitsubishi Electronics Display of America Remote Bulletin Board System is an electronic service accessible with your system and a modem. Communica- tion parameters are: 300/1200/2400/9600/14.4k/28.8k/33.6k bps, no parity, 8-data bits, 1 stop bit • Customer Service/ Technical Support (800) 632-4662 Fax (978) 742-7049 • Electronic Channels: Internet e-mail: tech-support@necmitsubishi.com Internet ftp site: ftp.necmitsubishi.com World Wide Web: http://www.necmits
ملخص المحتوى في الصفحة رقم 20
Limited Warranty NEC-Mitsubishi Electronics Display of America, Inc. (hereinafter “NMD-A”) warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at NMD-A’s sole option) any part of the enclosed unit which proves defective for a period of three (3) years from the date of first consumer purchase. Spare parts are warranted for ninety (90) days. Replacement parts or unit may be new or refurbished and wil
