Marshall electronic V-R261P-AFHD دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Specifications (continued)
Marshall Electronics
V-R261P-AFHD
SD/HD Widescreen LCD Monitor
Maintenance
■
Screen Cleaning
Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No. V-HWP-K). A clean micro-
fiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels.
Paper towel fibers are coarse and may scratch the surface of the polycarbonate faceplate or leave streaks on the
surface. Antistatic and fingerprint res

ملخص المحتوى في الصفحة رقم 2

Contents Specifications ■ ■ PANEL TALLY Product Overview.....................................................................................................................................................3 Screen Size 26.005” Diagonal 3 LEDs (Green, Red, Yellow). Activation requires contact Display Area (h x v) 575.700 x 323.831 mm closure of pin to ground on the HD-15 connector: Features ...........................................................................................................

ملخص المحتوى في الصفحة رقم 3

On-Screen Menu (continued) Product Overview SYSTEM CONFIGURATION SUBMENU The V-R261P-AFHD is a 26” widescreen high definition LCD monitor featuring our completely digital TFT-MegaPixel ™ active matrix LCD platform. This monitor is an ideal lightweight replacement for CRTs and can be used in all broadcast and professional video applications. Emulation of SMPTE-C/EBU color and adjustable color temperature enable the most precise color representation possible. Our proprietary digital signal process

ملخص المحتوى في الصفحة رقم 4

On-Screen Menu (continued) Installation and Initial Setup VIDEO CONFIGURATION SUBMENU (continued) ■ Unpacking ■ Aspect Ratio Settings Carefully unpack the V-R261P-AFHD monitor and verify that the following items are included: Use to switch between 4:3 and 16:9 aspect ratios. • V-R261P-AFHD Monitor with attached VESA adapter plate and button cover • V-PS24-7.5 Power Supply with 4-Pin XLR Connector As the V-R261P-AFHD monitor has a native resolution of 1366 x 768 RGB pixels, incoming images are au

ملخص المحتوى في الصفحة رقم 5

On-Screen Menu (continued) Front Panel Features VIDEO CONFIGURATION SUBMENU (continued) ■ Monochrome Mode 6 Use this setting to enable monochrome mode. Only the luminance of the image will be displayed as a grayscale picture. Top Front Panel ■ Blue-Only Mode Use this setting to enable Blue-Only mode. This mode displays only the blue color component of the image, switching off the red and green components. Use this mode when calibrating the monitor to SMPTE color bars with the following procedure

ملخص المحتوى في الصفحة رقم 6

On-Screen Menu (continued) Rear Panel Features VIDEO CONFIGURATION SUBMENU 4 Video Configuration Submenu ■ Color Temperature Presets Use this setting to choose one of three color temperature presets: 3 • D55 (5500K) • D65 (6500K) 2 • D93 (9300K) • USER (Adjustable Color Bias and Gain) 1 ■ Rear Panel Adjusting Color Bias Power Input 3 Tally 1 Connect the 24VDC input to the 4-Pin XLR power input Each tally light is activated via the HD-15 connector by connector. Power can be supplied from the incl

ملخص المحتوى في الصفحة رقم 7

On-Screen Menu (continued) Compatible Input Formats MARKER SETUP SUBMENU (continued) Format Composite S-Video YPbPr SDI VGA DVI-D ■ 4:3 Markers NTSC ● ● Use this setting to superimpose one of 5 markers on the screen when in 4:3 mode. This setting is disabled when the PAL ● ● aspect ratio is set to 16:9, or when Pixel-to-Pixel, Underscan, or H/V Delay is enabled. ● ● ● 480i / 59.94 • OFF (No Marker) 576i / 50 ● ● ● • 95% Safe Area • 93% Safe Area 485p / 59.94 ● • 90% Safe Area • 88% Safe Area 576

ملخص المحتوى في الصفحة رقم 8

On-Screen Menu (continued) On-Screen Menu MARKER SETUP SUBMENU STRUCTURE OVERVIEW OFF, 13:9, 14:9, 4:3, 2.35:1, MARKER 16:9 1.85:1, 95%, 93%, 90%, 88%, 80% MARKER SETUP OFF, 95%, 93%, 90%, 88%, MARKER 4:3 80% MARKER BACKGROUND OFF, HALF, BLACK CENTER MARKER OFF, ON COLOR TEMP D55, D65, D93, USER Marker Setup Submenu RED (0-100) ADJ COLOR BIAS GREEN (0-100) ■ 16:9 Markers BLUE (0-100) RED (0-100) Use this setting to superimpose one of 10 markers on the screen when in 16:9 mode. This setting is di